1. Kupu Whakataki
Mauruuru koe mo te hokoasing the HiKOKI 36V Cordless Hand Grinder GP36DA(NN). This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your tool. Please read this manual thoroughly before use and keep it for future reference. Proper understanding and adherence to these instructions will ensure optimal performance and extend the life of your hand grinder.
2. Nga korero haumaru
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Keep this manual accessible for all users.
Whakatupato Haumaru Utauta Hiko Whanui:
- Haumaru Wāhi Mahi: Kia ma te waahi mahi me te whakamarama pai. Ko nga waahi pouri, nga waahi pouri ranei ka pa mai nga aitua. Kaua e whakamahia nga taputapu hiko i roto i nga hau pupuhi, penei i te waahi o te wai ka mura, te hau, te puehu ranei.
- Haumaru Hiko: A ape i te pa atu ki te tinana ki nga papa whenua, ki runga ranei. Kaua e tukuna nga taputapu hiko ki te ua, te makuku ranei.
- Haumaru Whaiaro: Mau tonu te whakamarumaru kanohi. Whakamahia te whakamarumaru whakarongo ina whakahaere ana i te taputapu mo te wa roa. Kia tika te kakahu; karohia nga kakahu taratara me nga whakapaipai. Haumaru makawe roa.
- Te Whakamahi me te Tiaki Taputapu: Kaua e kaha te taputapu hiko. Whakamahia te taputapu hiko tika mo to tono. Momotuhia te putea pākahiko mai i te taputapu hiko i mua i te whakarereketanga, te whakarereke i nga taputapu, te penapena taputapu hiko ranei.
Specific Grinder Safety Warnings:
- Always use accessories that are rated for the maximum speed of the grinder.
- Me whakarite kia mau te taputapu mahiamped ranei puritia.
- Kia mau ki te pupuri i te taputapu me nga ringa e rua i te wa e mahi ana.
- Be aware of sparks and flying debris. Keep bystanders away from the work area.
- The GP36DA(NN) includes safety features such as soft start, brake, kickback reduction, and restart prevention. Familiarize yourself with these functions.
3. Nga Hua o te Hua
The HiKOKI GP36DA(NN) Cordless Hand Grinder is designed for various grinding and finishing tasks, offering portability and performance.
- 36V MultiVolt System: Utilizes a 36V MultiVolt battery for high power output.
- Motuka Korekore: Provides efficient power delivery and extended tool life.
- Whakawhiti Kiriata: I hangaia mo te mahi tonu.
- Dial-Type Stepless Speed Control: Adjusts rotation speed from 7,000 to 29,000 RPM.
- E rua nga momo mahi:
- Variable Speed Mode: Maintains a constant rotation speed based on the dial setting.
- Aratau Auto: Automatically adjusts rotation speed according to the load, reducing noise during no-load operation.
- Nga Mahi Haumaru: Equipped with soft start, electric brake, kickback reduction, and restart prevention for enhanced user safety.
- Diane o te Wai: 6mm collet chuck.
- Maximum Usable Tip Tool Diameter: 25mm.
Whakaahua: Ka mutuview of the HiKOKI MultiVolt Cordless Hand Grinder GP36DA, highlighting its 36V power, speed adjustment, slide switch, and auto mode for reduced noise.
Image: Chart comparing the grinding performance (approx. 1.6g/min) of the cordless GP36DA with an AC model GP3V (approx. 1.5g/min), demonstrating comparable power.
4. Tatūnga
4.1. Te Whakanoho me te Tangohanga Pūhiko
- Tāutatanga: Whakahāngaihia te pākahiko ki te putanga pākahiko o te taputapu. Pania te pākahiko ki tōna tūranga kia pāwhiritia rawatia.
- Tango: Press the battery release button (if present) and slide the battery pack out of the tool.
4.2. Attaching and Changing Accessories
The GP36DA(NN) comes with a 6mm collet chuck pre-installed. Use the provided spanners for accessory changes.
- Me mohio kua whakawetohia te taputapu ka tangohia te pākahiko.
- Insert the appropriate grinding bit or accessory into the collet chuck. Ensure the shank is fully inserted.
- Use the two spanners (12mm and 17mm) to tighten the collet nut securely. One spanner holds the spindle, and the other tightens the nut.
- To remove an accessory, reverse the tightening procedure.
5. Nga Tohutohu Whakahaere
5.1. Whakakaha me te Weto
The GP36DA(NN) features a slide switch for continuous operation.
- Hei Whakakā: Slide the switch forward to the 'ON' position. The tool will start with a soft start function.
- Hei Whakakore: Slide the switch backward to the 'OFF' position. The electric brake will engage to stop the accessory quickly.
5.2. Speed Adjustment and Mode Selection
The tool offers a dial for stepless speed adjustment and two operating modes.
Image: Close-up of the speed adjustment dial (numbered 1-5 and 'A' for Auto mode) and a table detailing RPMs for various applications.
- Variable Speed Mode (Dial Settings 1-5): Rotate the dial to select the desired speed. The tool will maintain this speed during operation.
- Auto Mode (Dial Setting A): Select 'A' on the dial. In this mode, the tool automatically adjusts its rotation speed based on the workload. It operates at a lower speed (approx. 15,000 RPM) when idle to reduce noise and increases to full speed (approx. 29,000 RPM) under load.
Tautuhinga Tere Manakohia:
| Aratau | Tautuhi Waea | Rotation Speed (min⁻¹) | Taupānga |
|---|---|---|---|
| Tere Taurangi | 1 | 7,000 | Polishing, Finishing |
| 2 | 13,800 | Tango Peita | |
| 3 | 16,600 | Tango Waikura | |
| 4 | 24,400 | Te whakaheke | |
| 5 | 29,000 | Te huri | |
| Aratau Aunoa | A | 15,000 (No-load) | General use, noise reduction at no-load |
| 29,000 (Under load) |
5.3. Ngā Tohutohu Mahi Whānui
- Kia mau ki nga ringa e rua te miihini miihini i nga wa katoa.
- Apply steady, even pressure. Avoid excessive force, which can damage the tool or workpiece.
- Tukua te taputapu kia eke ki tōna tere katoa i mua i te pa atu ki te rauemi mahi.
- Move the tool smoothly across the surface for an even finish.
Image: A user wearing gloves operates the HiKOKI cordless hand grinder on a metal pipe, generating sparks, demonstrating typical use.
6. Tiaki
Regular maintenance ensures the longevity and safe operation of your hand grinder.
- Te horoi: After each use, clean the tool body and ventilation openings with a soft, dry cloth. Do not use solvents or abrasive cleaners.
- Tirohanga Apatoko: Regularly inspect grinding bits and other accessories for wear, damage, or cracks. Replace worn or damaged accessories immediately.
- Tiaki Pūhiko: Store batteries in a cool, dry place. Do not expose them to extreme temperatures. Charge batteries using only the specified HiKOKI charger (UC 18YDL2).
- Rokiroki: Rokirokihia te taputapu me ngā taputapu ki te wāhi maroke, haumaru hoki, kia kore e taea e ngā tamariki te toro atu.
7. Te Raru
If you encounter issues with your GP36DA(NN), refer to the following common problems and solutions:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore e timata te taputapu | Kaore i tika te whakauru o te pākahiko Kua tukuna te pākahiko Restart prevention function activated | Tāutahia te pākahiko kia mau Utuhia te pākahiko Turn the switch OFF then ON again |
| He iti te kaha, te tere ranei | He iti te pākahiko Accessory worn or dull Kua whakahohehia te parenga taumaha | Utuhia te pākahiko Whakakapia te taputapu Reduce pressure, allow tool to cool |
| Te wiri nui | Accessory not properly secured Damaged or unbalanced accessory | Tighten collet nut Whakakapia te taputapu |
If the problem persists after attempting these solutions, please contact an authorized HiKOKI service center.
8. Whakatakotoranga
Detailed technical specifications for the HiKOKI 36V Cordless Hand Grinder GP36DA(NN).
Image: A table showing the detailed specifications of the GP36DA(NN) hand grinder, including dimensions, weight, and battery information.
| Whakatakotoranga | Uara |
|---|---|
| Tauira | GP36DA |
| Max Collet Chuck Diameter | 6 mm |
| Max Usable Tip Tool Diameter | 25 mm |
| Motini | DC Brushless Motor |
| Tere Hurihuri kore-uta | 7,000 - 29,000 min⁻¹ (RPM) |
| Machine Dimensions (L x H x W) | 468 x 121 x 86 mm (with BSL 36A18 battery) |
| Papatipu (Taumaha) | 2.5 kg (with BSL 36A18 battery) |
| Pūhiko Hototahi | MultiVolt Battery (with remaining charge display) BSL 36A18 |
| Kaitohu | UC 18YDL2 (with cooling function) |
| Charging Time (Practical / Full) | Approx. 19 min / 25 min |
| Tautoko Paerewa | Collet chuck (6mm) (attached to main unit), Spanners (12mm, 17mm) each 1 pc. |
9. Pūtāhui me te Tautoko
HiKOKI products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official HiKOKI webpae.
For technical support, service, or to purchase replacement parts and accessories, please contact your authorized HiKOKI dealer or service center. You can find contact information on the official HiKOKI webpae, ma to kaihoko hua ranei.