Kupu Whakataki
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Millennium Lighting 9332-SN Traditional Vanity Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The Millennium Lighting 9332-SN is a two-light vanity fixture designed for indoor use, featuring a satin nickel finish and metal construction. It is suitable for damp locations and is UL listed for safety.
Image: The Millennium Lighting 9332-SN Traditional Vanity Light, showcasing its satin nickel finish and two frosted glass shades.
Nga Tohutohu Haumaru Nui
WHAKATŪPATO: Te mate o te ru hiko. Momotuhia te hiko i te pouaka whakakorikori, i te waahi ara iahiko ranei i mua i te whakaurunga, te mahi ratonga ranei.
- Me rite ngā hononga hiko katoa ki ngā ture ā-rohe, ki ngā ture ā-motu, ki te National Electric Code rānei (NEC). Mēnā kāore koe i te mōhio ki ngā hononga waea hiko tika, whakapā atu ki tētahi tohunga hiko whai tohu.
- Use only UL or ETL listed wire connectors.
- Ko tenei hua te tikanga mo te whakamahi o roto anake.
- Kaua e neke ake i te wat teiteitage kua tohua mo nga topuku.
- Whakatupato Kaupapa 65: Kei roto pea i tenei hua nga matū e mohiotia ana e te State of California hei mate pukupuku, he mate whanau, he kino atu ranei. Horoi ringa i muri i te mahi.
Ihirangi mokete
Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the fixture.
- Light Fixture Assembly (1)
- Ngā Ārai Karāhe (2)
- Mounting Hardware Kit (includes mounting strap, outlet box screws, wire connectors, ground screw) (1)
Tatūnga me te Tāuta
Nga Utauta e Hiahia ana (Kaore i whakauruhia)
- Phillips Head Tiwiri
- Tiwhikete Upoko Upoko
- Nga Kaipupuri Waea
- Kumine
- Ripene Hiko
Hipanga-i-Step Tāuta
- Whakaweto Hiko: Before starting installation, ensure the power to the electrical outlet box is turned off at the circuit breaker or fuse box.
- Prepare Mounting Strap: Attach the mounting strap to the outlet box using the provided outlet box screws. Ensure the strap is securely fastened.
- Hanga Hononga Hiko:
- Connect the bare copper ground wire from the fixture to the ground wire from the outlet box (usually bare copper or green) using a wire connector. Secure the ground wire to the mounting strap with the green ground screw.
- Connect the white wire from the fixture to the white (neutral) wire from the outlet box using a wire connector.
- Connect the black wire from the fixture to the black (hot) wire from the outlet box using a wire connector.
- Wrap all wire connections with electrical tape for added security.
- Whakamaunga: Carefully tuck all wires into the outlet box. Align the fixture's backplate with the mounting strap and secure it with the provided mounting screws.
- Tāutahia ngā Topuku: Insert the recommended light bulbs (not included) into the sockets. Do not exceed 100 watts per bulb.
- Tāpirihia ngā Ārai Karāhe: Secure the glass shades to the fixture according to the specific design (e.g., by threading a ring or using set screws). Ensure they are snug but do not overtighten.
- Whakaora i te Mana: Once installation is complete, restore power at the circuit breaker or fuse box.
Nga Tohutohu Whakahaere
The Millennium Lighting 9332-SN vanity light operates via a standard wall switch (not included). Once installed and power is restored, use the wall switch to turn the light fixture on or off.
- Momo Puma: This fixture requires two incandescent or compatible LED bulbs.
- Wattage: Each bulb socket supports a maximum of 100 watts. Do not exceed this limit to prevent overheating and potential damage.
Te tiaki
Tiaki me te horoi
- Momotuhia te hiko i mua i te horoi.
- To clean the fixture, wipe it with a soft, dry cloth.
- Kaua e whakamahia nga kai horoi, nga whakarewa, nga whakakoi ranei na te mea ka pakaru te mutunga.
- Clean glass shades with a mild glass cleaner and a soft cloth.
Whakakapinga Purama
- Ensure power is off at the circuit breaker before replacing bulbs.
- Allow bulbs to cool completely before touching them.
- Unscrew the old bulb and screw in a new bulb of the same type and wattage (mōrahi 100W).
Tohatoha Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kare e marama te taputapu | 1. Ka mutu te hiko 2. Pupuku hapa 3. He waea waea hē | 1. Tirohia te pūwehe ara iahiko/fius 2. Whakakapia te rama 3. Verify wiring connections (consult electrician if unsure) |
| Ka wera nga topuku | 1. He wat bulbtage 2. Rererangitage huringa | 1. Use bulbs within specified wattage (mōrahi 100W) 2. Consult electrician to check household voltage |
| Ka whiti marama | 1. Pupura wetekina 2. Hononga waea korekore | 1. Tighten bulb 2. Check and secure wiring connections (power off first) |
Whakatakotoranga Hua
| Whakatakotoranga | Taipitopito |
|---|---|
| Waitohu | Maama Mileniuma |
| Tau tauira | 9332-SN |
| Whakaoti | Satin Nickel |
| Rauemi | Te whakarewa |
| Momo Whakaritenga | Marama horihori |
| Ahu (H x W) | 8.00 inihi x 12.00 inihi |
| Wattage (Mōrahi) | 100 watts per socket |
| Puna Mana | Hiko Hiko |
| Whakatauranga Haumaru | Damp, UL kua whakarārangitia |
| Taumaha Tūemi | 5 pauna |
Pūtāhui me te Tautoko
Nga korero Whakaputanga
This Millennium Lighting product is covered by a manufacturer's warranty. Please refer to the warranty documentation included with your purchase or contact Millennium Lighting directly for specific terms and conditions.
Tautoko Kiritaki
For technical assistance, missing parts, or warranty claims, please contact Millennium Lighting customer support. Contact information can typically be found on the product packaging or the manufacturer's official webpae.