VONETS AC1200 Takirua Roopu Ahokore Iti Piriti/Whakahou/Pouara VBG1200 Pukapuka Kaiwhakamahi

1. Kupu Whakataki

Figure 1.1: VONETS VBG1200 Industrial Mini Dual Band Device Overview

The VONETS AC1200 VBG1200 is a versatile dual-band wireless device designed to provide flexible network connectivity. It functions as a WiFi Bridge, Repeater, or Router, allowing you to convert WiFi to Ethernet, extend wireless coverage, or establish a new wireless network. This device supports both 2.4GHz and 5GHz bands, offering high-speed data transfer and reduced interference for various applications.

This manual provides detailed instructions for setting up, operating, and maintaining your VBG1200 device. Please read it carefully before use.

Figure 1.2: Global Network Connectivity

2. Nga Hua o te Hua

• Dual Band AC1200 Connectivity: Supports 2.4GHz and 5GHz WiFi bands for a combined wireless bandwidth of up to 1200Mbps (300Mbps for 2.4GHz, 900Mbps for 5GHz).
• Aratau Mahi Maha: Functions as a WiFi Bridge, Repeater, or Router to suit various networking needs.
• Tauranga Itarangi: Equipped with one 10/100Mbps adaptive Ethernet RJ45 port for wired connections.
• Nga Antenna o waho: Features four external antennas (two for 2.4GHz and two for 5GHz) for enhanced signal reception and transmission.
• Konumohe Koranu Casing: Durable aluminum alloy shell provides excellent heat dissipation, ensuring stable operation.
• Hononga Anō Aunoa ki te Wāhi Wera: Supports automatic reconnection to stored WiFi hotspots (up to 100) with full match or SSID/password authentication.
• Signal Strength Detection (SSA): Includes SSA function for signal strength reporting and motion detection.
• Haruru iti Ampwhakaahuru (LNA): Built-in LNA module enhances receiving sensitivity and signal coverage.
• Tuku Hiko: Supports DC5V-15V power input with two-level automatic overvoltagtiaki.

Figure 2.1: Aluminum Alloy Casing for Heat Dissipation

Figure 2.2: LNA and PA for Enhanced Signal Coverage

3. Ihirangi mokete

Tena koa tirohia kei roto katoa nga taonga kei roto i to kete:

• VONETS AC1200 VBG1200 Device
• USB/DC Power Cable (30cm)
• Ethernet Cable (RJ45 male)
• Pukapuka Kaiwhakamahi (tenei tuhinga)

4. Pūrere Neke Atuview

Figure 4.1: VONETS AC1200 VBG1200 Device with Cables

The VBG1200 features a compact design with four external antennas. It includes a 10/100Mbps Ethernet port and a USB/DC power input. Indicator lights provide status information:

• Maama Kariki: 5G WiFi connection status.
• Marama kahurangi: 2.4G WiFi connection status.
• Maama kowhai: Ethernet cable connection status.

Figure 4.2: Product Specification Diagram with Ports and Indicators

5. Tohutohu Tatūnga

Follow these general steps to set up your VONETS VBG1200 device. Specific configuration details will depend on your chosen operating mode.

1. Whakahiko: Connect the USB/DC power cable to the VBG1200 device and then to a compatible USB power adapter (5V-15V) or a USB port on a device. The indicator lights will illuminate.
2. Hononga Tuatahi: Connect the VBG1200's Ethernet port to your computer's Ethernet port using the provided RJ45 cable.
3. Whārangi Whirihoranga Uru: Tuwhera a web browser on your computer and enter the default IP address (usually found in the quick start guide or on the device label) to access the configuration interface. If the device is new, it might broadcast its own WiFi network for initial setup.
4. Configure Operating Mode: Within the configuration interface, select your desired operating mode (Bridge, Repeater, or Router) and follow the on-screen prompts to configure network settings, including WiFi SSID, password, and other relevant parameters.
5. Hoatu Tautuhinga: Save and apply the configuration. The device may reboot.
6. Manatokohia te Hononga: After reboot, check the indicator lights to confirm successful connection to your network. Disconnect the Ethernet cable from your computer if using WiFi mode.

Note: For detailed configuration steps specific to each mode, refer to the online documentation or the device's web interface help section.

6. Aratau Mahi

The VONETS VBG1200 supports three primary operating modes:

6.1. WiFi Bridge Mode

In Bridge mode, the device converts a WiFi signal into a wired Ethernet connection. This is ideal for connecting wired-only devices (e.g., network printers, DVRs, IP cameras, smart TVs, gaming consoles like PS3) to a wireless network without running long Ethernet cables.

Figure 6.1: WiFi Bridge Application

Whirihoranga: Connect the VBG1200 to your wired device via Ethernet. Access the configuration page, select Bridge mode, and connect to your existing WiFi network by entering its SSID and password.

6.2. WiFi Repeater Mode

Repeater mode extends the range of an existing WiFi network. The VBG1200 receives the wireless signal from your main router and re-broadcasts it, effectively expanding coverage to areas with weak or no signal.

Figure 6.2: WiFi Repeater Application

Whirihoranga: Place the VBG1200 within range of your main WiFi router. Access the configuration page, select Repeater mode, and connect to your existing WiFi network. The device will then extend this network.

6.3. WiFi Router Mode

In Router mode, the VBG1200 acts as a primary wireless access point. It can connect to an internet source (e.g., a modem) via its Ethernet port and then broadcast its own WiFi network for multiple devices to connect to.

Figure 6.3: WiFi Router Application

Whirihoranga: Connect the VBG1200's Ethernet port to your modem or internet source. Access the configuration page, select Router mode, and set up your new WiFi network's SSID and password.

7. Tauira Taupānga

The VBG1200 is suitable for a wide range of applications due to its versatile functionality:

• Aunoatanga Ahumahi: Connecting industrial PLCs and control systems to a wireless network.
• Pūnaha Haumarutanga: Providing network connectivity for monitoring cameras and DVRs.
• Pūrere Hauora: Enabling wireless connectivity for various medical instruments.
• Retail & POS: Integrating electronic scales and cash registers into a network.
• Ngā Pūrere IoT: Serving as a WiFi adapter for IoT gateways and other smart devices.
• Robotics: Providing network access for robotic systems.
• Kāinga me te Tari: Extending WiFi coverage, connecting wired devices, or creating a new WiFi network.

Figure 7.1: Devices Compatible with VBG1200

8. Whakatakotoranga

Figure 8.1: Dual Band Concurrency and Speed

Figure 8.2: Point-to-Point Transmission Distance

9. Te Raru

If you encounter issues with your VBG1200, refer to the following troubleshooting tips:

• No Power/Indicator Lights Off:
  • Ensure the USB/DC power cable is securely connected to both the device and a working power source (5V-15V).
  • Whakamātauria tētahi atu urutau hiko USB, tētahi atu tauranga USB rānei.
• Cannot Access Configuration Page:
  • Verify that your computer is directly connected to the VBG1200 via Ethernet.
  • Me whakarite kia whakaritea te urutau whatunga o tō rorohiko ki te tiki aunoa i tētahi wāhitau IP (DHCP).
  • Whakamātauria he rerekē web pūtirotiro.
  • Reset the device to factory defaults (see Section 10.1).
• Kaore he Hononga Ipurangi:
  • In Bridge/Repeater mode, ensure the VBG1200 is successfully connected to your main WiFi network (check indicator lights).
  • In Router mode, ensure the Ethernet cable from your modem/internet source is properly connected and the modem is working.
  • Verify that the WiFi password entered during configuration is correct.
  • Check for signal interference or distance issues.
• Slow Speed/Unstable Connection:
  • Ensure the device is placed in an optimal location, away from obstructions and interference sources.
  • Tirohia mēnā kei te whakapau kaha ētahi atu pūrere i runga i tō whatunga.
  • Consider switching between 2.4GHz and 5GHz bands if applicable, as 5GHz offers higher speed but shorter range.
  • Ensure the device has adequate ventilation to prevent overheating, which can affect performance. The aluminum casing kua hoahoatia mo te werawera.
• Device Does Not Reconnect Automatically:
  • This can sometimes occur after a power outage. Try power cycling the device (unplug and replug).
  • Ensure the "WiFi hotspot auto-reconnect" feature is enabled in the configuration settings.

10. Tiaki

Proper maintenance ensures the longevity and optimal performance of your VBG1200 device.

• Te horoi: Whakamahia he kakahu maeneene, maroke hei horoi i te taputapu. Kaua e whakamahia nga kai horoi wai, aerosol ranei.
• Whakahau: Ensure the device is placed in a well-ventilated area. Do not cover the vents or place it in an enclosed space to prevent overheating.
• Whakahōu Firmware: Tirohia i ia wa i te kaihanga webpae mo nga whakahou firmware. Ka taea e nga whakahou te whakapai ake i nga mahi, te taapiri i nga ahuatanga, me te whakatika i nga pepeke.
• Hurihanga Hiko: If the device becomes unresponsive or experiences intermittent issues, power cycling (unplugging and replugging the power) can often resolve the problem.

10.1. Tautuhi Tautuhi

If you encounter persistent issues or forget your configuration settings, you can perform a factory reset. This will revert all settings to their default values.

1. Ki te whakakahangia te taputapu, kimihia te paatene tautuhi (te nuinga o te waa he kohao iti).
2. Whakamahia he rawhi pepa, he mea koi rānei, hei pēhi me te pupuri i te pātene tautuhi anō mō ​​te 5-10 hēkona pea.
3. Release the button. The device will reboot with factory default settings. You will need to reconfigure it from scratch.

11. Pūtāhui me te Tautoko

For warranty information, please refer to the documentation provided with your purchase or visit the official Vonets website. If you require technical assistance or have questions not covered in this manual, please contact Vonets customer support.

Īmēra Tautoko Hangarau: skyfoxcn@vip.163.com