hykolity 52 inch Ceiling Fan Instruction Manual

1. Nga korero haumaru

Please read and understand this entire manual before attempting to assemble, operate, or install the product. Failure to do so could lead to electric shock, fire, or other injuries.

• Momotuhia i nga wa katoa te hiko i te waahi ara iahiko matua i mua i te whakaurunga, te tiaki ranei.
• Me rite ngā hononga hiko katoa ki ngā ture ā-rohe, ngā ture ā-ture, me te Ture Hiko ā-Motu. Mena kāore koe i te mōhio ki ngā waea hiko, whakapā atu ki tētahi tohunga hiko whai tohu.
• Me whakarite kia taea e te wāhi tāutanga te tautoko i te taumaha o te pā hau.
• Kaua e whakahaeretia te powhiriwhiri me nga matatahi kua pakaru, he whare ranei.
• Puritia ō ringaringa kia matara atu i ngā mata o te pā hau i te wā e whakamahia ana.

2. Hua Neke Atuview

2.1 Nga waahanga matua

• Hoahoa Minimalist Hou: 52-inch ceiling fan with metal motor housing and six dual-color blades. Features an acrylic cover and flicker-free integrated LED light.
• Maama rama rama: Replaceable 18W LED light source with three color temperature options (3000K Warm White, 4000K Natural White, 5000K Cool White) and adjustable brightness (20%–100%).
• Moutere Whakamuri Ataahua: Allows for downward airflow in summer for cooling and upward airflow in winter for warm air distribution. Designed for quiet operation.
• Multifunction Remote Control: Offers six fan speeds, a natural wind option, 1/2/4-hour timer functions, and a security anti-theft function (light turns on for 5 minutes every two hours).

2.2 Whakatakotoranga

2.3 Ngā Tirohanga Hua

3. Tāutanga

For detailed visual instructions, please refer to the official installation video below. Ensure power is disconnected at the circuit breaker before beginning installation.

3.1 Step-by-Step Installation Guide

1. Prepare the Downrod:
   • Loosen the hanging ball screw and remove the horizontal bolt to detach the hanging ball.
   • Remove the lower latch from the hanging pipe.
2. Prepare the Motor Assembly:
   • Partially loosen the preassembled set screws in the yoke at the top of the motor assembly.
3. Assemble Downrod to Motor:
   • Thread the main wiring harness through the hole at the bottom of the lifting pipe (downrod).
   • Slip the downrod into the motor assembly yoke, aligning the holes for the safety pin and cotter pin.
   • Tighten the set screws in the motor assembly yoke.
4. Install Remote Control Receiver:
   • Insert the remote control receiver (BCE) into the lifting pipe.
   • Put the crossbolt back through the lifting ball to secure it, then replace the original latch and tighten the lifting screw.
5. Mount the Hanging Bracket:
   • Install the hanging bracket to the outlet box using the provided outlet box screws (or original screws).
   • Connect the GROUND (GREEN) wires from the fan and remote control receiver to the BARE/GREEN supply wire from the ceiling.
   • Connect the BLACK wire from the remote control receiver to the BLACK supply wire from the ceiling.
   • Connect the WHITE wire (labeled AC IN N) from the remote control receiver to the WHITE supply wire from the ceiling.
   • Connect the wire group from the remote control receiver to the wire group from the motor assembly.
6. Whakairihia te Pahi:
   • Grab the fan firmly with two hands. Slide the downrod through the opening in the hanging bracket and let the hanging ball rest on the hanging bracket.
   • Hurihia te mokamoka paoro iri kia tu ra ano ki te ripa taiapa iri.
   • Gently slide the remote control receiver flat-side up into the mounting bracket.
   • Re-insert the screw that was removed and then tighten both screws securely.
7. Install Fan Blades:
   • Loosen the screws and remove the installation fan blade decorative panel.
   • Slide a blade through one of the narrow, rectangular openings on the motor housing, aligning holes in the blade with holes in the blade arm.
   • Insert 3 blade attachment screws with fingers first and then tighten screws securely with a Phillips screwdriver. Repeat this procedure for the remaining blades.
8. Tāutahia te Kete Rama LED:
   • Connect the wire group from the motor housing to the wire group from the LED light kit. Ensure Molex connections snap together securely.
   • Whakapaia katoatia e 3 nga wiri ki te huriwiri Phillips.
9. Whakapiri Lampwhakamarumaru:
   • Hurihia te lampshade clockwise to ensure fixation.

4. Nga Tohutohu Whakahaere

The hykolity ceiling fan is operated using the included multifunction remote control.

4.1 Nga Mahi Mana Mamao

• Tere Kiri (1-6): Ka whakarerekē i te tere o te hau mai i te iti (1) ki te teitei (6).
• Fan I / Weto: Ka whakakaha, ka whakaweto ranei i te powhiriwhiri.
• Motini Whakahuri: Changes the direction of the fan blades for summer (downward airflow) or winter (upward airflow) modes.
• Rama / Weto: Ka whakakā, ka whakaweto rānei i te rama LED kua whakauruhia.
• Light Dimming (20%-100%): Whakaritea te kanapa o te rama LED.
• Paemahana Tae (3000K/4000K/5000K): Cycles through Warm White, Natural White, and Cool White light settings.
• Hau Hauora: Ka whakahohe i tētahi aratau e whakatauira ana i te hau māori mā te whakarerekē i ngā tere o te pā.
• Taumahi Matama (1H/2H/4H): Ka tautuhi i te powhiriwhiri kia weto aunoa i muri i te 1, 2, 4 haora ranei.
• Security Anti-Theft Function: Activates a mode where the light turns on for 5 minutes every two hours.

4.2 Reversible Motor Operation

The reversible motor feature allows you to optimize air circulation for different seasons:

• Aratau Raumati: Set the fan to rotate counter-clockwise to create a downward airflow, producing a cooling effect.
• Aratau takurua: Set the fan to rotate clockwise to circulate warm air upwards, helping to distribute heat evenly throughout the room.

5. Tiaki

Ko te tiaki i nga wa katoa ka whakarite i te mahi tino pai me te roa o to powhiri tuanui.

• Te horoi: Whakamahia he ngohengohe, damp he kakahu hei horoi i nga matatahi me te whare motuka. Kaua e whakamahi i nga kai horoi me nga whakarewa.
• Tirohanga Mata: Periodically check the fan blades for any signs of damage or warping. Ensure all blade attachment screws are secure.
• Hononga Hiko: Annually inspect all electrical connections for tightness and wear.
• Puna Maama: The integrated LED light source is replaceable. Contact customer service for replacement parts if needed.

6. Te Raru

If you experience issues with your hykolity ceiling fan, refer to the following common problems and solutions:

7. Pūtāhui me te Tautoko Kiritaki

For warranty information or any further assistance, please contact hykolity customer service. Refer to the product packaging or the official hykolity webpae mo nga taipitopito whakamana me nga korero whakapā.

If you encounter any issues during use, feel free to contact us for assistance.