SUNMI M2 MAX Industrial Tablet User Manual

Kupu Whakataki

This manual provides comprehensive instructions for the safe and efficient use of your SUNMI M2 MAX Industrial Tablet, model TF700. Please read this manual thoroughly before operating the device and retain it for future reference.

Whakaahua 1: Mua view of the SUNMI M2 MAX Industrial Tablet, showing its display with various application icons.

Tatūnga

1. Te Wetewete me te Tirotiro Tuatahi

Tangohia marietia ngā wāhanga katoa i roto i te takai. Me manatoko kei te wātea ngā tūemi katoa kua whakarārangihia i raro nei, ā, kāore he pakaru:

• SUNMI M2 MAX Industrial Tablet (TF700)
• Pūurutau Hiko
• USB Taura-C taura
• Hand Strap (optional, if included with your model)

2. Ka tohatohahia te Pūrere

Before first use, fully charge the tablet. Connect the USB Type-C cable to the tablet's charging port and the other end to the power adapter. Plug the power adapter into a wall outlet. The charging indicator will illuminate.

The tablet is equipped with an 8360mAh non-removable lithium polymer battery. A full charge can provide over 12 hours of continuous operation.

3. Installing SIM Card and MicroSD Card (Optional)

The device supports MicroSIM or NanoSIM cards (Config 1) and an eSIM (Config 2). It also supports MicroSD cards up to 128GB for expanded storage.

1. Locate the SIM/MicroSD card slot on the side of the tablet.
2. Use the provided SIM ejector tool (if applicable) or a small paperclip to open the tray.
3. Carefully place the SIM card(s) and/or MicroSD card into the tray according to the diagram on the tray.
4. Pehia ata te paepae ki roto i te mokamoka kia pao noa ki tona waahi.

Whakaahua 2: Whakamuri view of the SUNMI M2 MAX, highlighting the camera, pogo pin charging interface, and the location of the SIM/MicroSD card slot.

4. Attaching the Hand Strap (Optional)

If your model includes a hand strap, attach it to the designated points on the back of the tablet for secure handling during mobile operations.

Figure 3: The SUNMI M2 MAX Industrial Tablet being held with an optional hand strap, demonstrating enhanced portability and secure grip.

Te whakahaere i te Pūrere

1. Te Hiko / Whakaweto

• Whakahiko: Press and hold the Power button (located on the side) until the SUNMI logo appears on the screen.
• Weto Whakakore: Press and hold the Power button until a power-off menu appears. Select "Power Off" and confirm.
• Tīmata anō: Mai i te tahua whakaweto, tīpakohia "Tīmata anō" hei whakaara anō i te pūrere.

2. Whakaterenga Taketake

The SUNMI M2 MAX runs on the Android operating system. Navigation is primarily touch-based:

• Tap: Hei whiriwhiri i tetahi mea, whakatuwhera ranei i tetahi tono.
• Swipe: Hei panuku i roto i ngā rārangi, hei whakawhiti rānei i waenga i ngā mata.
• Whakawiri-ki-topa: Hei whakanui, hei whakaiti rānei i ngā whakaahua, web wharangi.
• Pātene Kāinga: Ka hoki ki te mata o te kainga.
• Pātene Whakamuri: Ka hoki ki te mata o mua.
• Pātene Taupānga Hou: Whakaatu ai i nga tono kua whakamahia noa.

3. Te hono atu ki ngā whatunga

The tablet supports Wi-Fi (2.4GHz/5GHz, 802.11 a/b/g/n/ac) and cellular networks (2G, 3G, 4G).

• Wi-Fi: Haere ki Tautuhinga> Whatunga me te ipurangi> Wi-FiWhakakāhia te Wi-Fi, tīpakohia te whatunga e hiahiatia ana e koe, ā, tāuruhia te kupuhipa mēnā e hiahiatia ana.
• Raraunga Pūkoro: Me whakarite kua whakauruhia he kaari SIM whaimana. Haere ki Tautuhinga > Whatunga me te ipurangi > Whatunga pūkoro to enable mobile data and configure APN settings if necessary.
• Nihokikorangi: Haere ki Tautuhinga> Nga taputapu hono> Nihokikorangi to pair with Bluetooth devices (supports Bluetooth 5.0).

4. Using NFC

The SUNMI M2 MAX is equipped with NFC (Near Field Communication) for contactless transactions and data exchange. To use NFC, ensure it is enabled in settings and hold the tablet near a compatible NFC reader or device.

5. Mahi Camera

The tablet features a 13 MP rear camera with flash and autofocus, and a 5 MP front camera. Open the "Camera" application to capture photos or record videos.

Te tiaki

1. Te horoi i te Pūrere

Whakamahia he kakahu ngohengohe, karekau he ngongo paku dampened with water or a screen cleaner to wipe the display and exterior. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture.

2. Tiaki Pūhiko

• Avoid exposing the tablet to extreme temperatures (below -20°C or above 70°C).
• Kaua e tukua te pākahiko kia tino rere tonu.
• Use only the original or certified compatible power adapter and cable.

3. Whakahōu Pūmanawa

Takitaki me te whakauru i nga whakahōu punaha kia pai ai te mahi me te haumarutanga. Haere ki Tautuhinga> Pūnaha> Whakahou Pūnaha.

4. Tiaki Taiao

The SUNMI M2 MAX is designed with IP68 protection and a 1m drop specification, making it suitable for demanding environments. However, avoid intentional drops or prolonged submersion in water.

Raparongoā

Whakatakotoranga

The following table outlines the key technical specifications of the SUNMI M2 MAX Industrial Tablet (Model: TF700).

Figure 4: Comprehensive technical specifications for the SUNMI M2 MAX Industrial Tablet.

• Tauira: TF700
• Pūnaha Mahi: Android 9.0 (SUNMI OS)
• Tukatuka: Kryo-260, Octa-core 2.2GHz (Qualcomm)
• Pūmahara: 3GB RAM + 32GB ROM (eMMC)
• Whakaatu: 10.1-inch FHD, 1920x1200, Capacitive multitouch, Corning Gorilla Glass 3
• Ngā Kāmera: Front: 5MP FF; Rear: 13MP AF + Flashlight, supports 1D/2D barcode recognition
• NFC: Type-A&B card, Mifare card, Felica card, ISO/IEC 14443 and ISO/IEC 15693 compliant
• Speaker/MIC: 1W Speaker, 2x MIC
• Mokamoka Kari PSAM: 1x PSAM
• Mokamoka Kaari SIM: 1x MicroSD (TF), 1x MicroSIM or 1x NanoSIM (TF700 Config 1), eSIM (TF700 Config 2)
• Whatunga: 2G & 3G & 4G
• Wi-Fi: 2.4GHz/5GHz, 802.11 a/b/g/n/ac
• Nihokikorangi: Supports Bluetooth 2.1/3.0/4.2/5.0 (BLE)
• GPS: Supports AGPS, GPS, GLONASS, Beidou (Config 2)
• Pūoko: Gravity sensor, light sensor, compass, Hall
• Pātene: 1x Power (lock screen), 2x Volume (+/-)
• Tauranga: 1x Type-C (supports OTG), 1x Audio Jack, 1x MicroSD (up to 128GB expansion)
• Pūhiko: Non-removable Lithium Polymer battery, 8360mAh
• Pūurutau Hiko: Input: AC 100-240V, Output: DC 5V/2A
• Ahu (LxWxH): 249.8 x 160 x 9.9 mm (0.39 x 6.3 x 9.84 inihi)
• Taumaha Tapeke: 673g (1.48 pauna)
• Parenga: IP68, 1m drop spec
• Te Waahi Mahi: -20°C ki te 55°C
• Paemahana Rokiroki: -40°C ki te 70°C

Pūtāhui me te Tautoko

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official SUNMI webpae. Puritia to tohu hoko mo nga kereme whakamana.

SUNMI Official Webpae: www.sunmi.com