1. Kupu Whakataki
Mauruuru koe mo te hokoasing the uscce Loud Dual Alarm Clock with Bed Shaker. This device is designed to provide a reliable and effective wake-up solution, especially for heavy sleepers or individuals with hearing impairment. It features a loud alarm, a powerful bed shaker, dual alarm settings, adjustable brightness, and a convenient USB charging port. Please read this manual carefully to ensure proper use and optimal performance of your alarm clock.
2. Nga korero haumaru
- Kaua e tukuna te taputapu ki te wai, ki te makuku nui ranei.
- A ape i te whakanoho i te taputapu ki te taha o nga puna wera, ki te ra tika ranei.
- Whakamahia anake te urutau hiko kua whakaratohia.
- Kaua e taea e nga tamariki.
- Kaua e ngana ki te wetewete, ki te whakatika ranei i te taputapu. Whakapa atu ki te tautoko a nga kaihoko mena ka puta nga take.
- Me whakarite kia tika te hau huri noa i te taputapu.
3. Ihirangi mokete
- uscce Loud Dual Alarm Clock
- Kaikoretanga Moenga
- Pūurutau Hiko
- Pukapuka Kaiwhakamahi
4. Hua Neke Atuview
Kia mohio koe ki nga waahanga me nga mana whakahaere o to karaka whakaoho.
The main unit of the alarm clock with its digital display and the separate bed shaker unit.
Detailed dimensions of the alarm clock and bed shaker for placement reference.
Mana me Tauranga:
- Left Knob (Time Set/Dimmer): Rotate to adjust hours/minutes, press to confirm. Also controls display brightness.
- Right Knob (Alarm Set/Dimmer): Rotate to adjust alarm time, press to confirm. Also controls display brightness.
- ALARM 1 SET (HOLD)/ON/OFF Button: Sets or activates/deactivates Alarm 1.
- ALARM 2 SET (HOLD)/ON/OFF Button: Sets or activates/deactivates Alarm 2.
- PUKA HURI: Provides 9 minutes of extra sleep.
- SOUND/VIBRATION/BOTH Switch: Selects alarm output mode.
- Tauranga Whakatau USB: For charging external devices.
- Wāhanga Pūhiko: For backup batteries (2 x AAA, not included).
- Bed Shaker HI/MED/LO Switch: Adjusts vibration intensity.
5. Tatūnga
5.1 Hononga Hiko
- Connect the power adapter to the DC IN port on the back of the alarm clock.
- Plug the power adapter into a standard wall outlet. The display will light up.
5.2 Pūrua Pūhiko (Kōwhiringa)
Mo te wa me nga tautuhinga whakaoho te pupuri i te wa o te hiko outages, install 2 AAA batteries (not included).
Open the battery compartment cover and insert 2 AAA batteries, observing polarity.
- Open the battery compartment cover on the bottom of the clock.
- Kōkuhu 2 pākahiko AAA, kia tika te polarity (+/-).
- Katia te uhi o te wahanga pākahiko.
Note: Battery backup only retains time and alarm settings. Vibration and USB charging functions will not work during a power outage.
5.3 Connecting the Bed Shaker
- Plug the bed shaker cable into the dedicated port on the back of the alarm clock.
- Place the bed shaker under your pillow, under the fitted sheet, or between the mattress and box spring for optimal vibration.
Recommended placements for the bed shaker to ensure effective vibration.
6. Nga Tohutohu Whakahaere
6.1 Te Whakatakoto i Te Wa
The two top knobs are used for setting time, alarms, and dimmer.
- Hurihia te Left Knob (Time Set) ki te whakatika i te haora.
- Hurihia te Right Knob (Time Set) ki te whakatika i te meneti.
- The time will be set automatically after a few seconds of inactivity or by pressing either knob.
6.2 Setting Alarms (Dual Alarms)
The display shows separate indicators for Alarm 1 and Alarm 2.
- Hei Whakatakoto i te Whakaoho 1: Patohia me te pupuri i te WHAKAMAHI 1 SET button until the alarm time flashes. Rotate the Left and Right Knobs to set the desired alarm time. Press the WHAKAMAHI 1 SET patene ano hei whakau.
- Hei Whakatakoto i te Whakaoho 2: Patohia me te pupuri i te WHAKAMAHI 2 SET button until the alarm time flashes. Rotate the Left and Right Knobs to set the desired alarm time. Press the WHAKAMAHI 2 SET patene ano hei whakau.
- To Activate/Deactivate Alarm: Pēhia poto te pātene e pā ana WHAKATAHI PANUI button (ALARM 1 or ALARM 2) to toggle the alarm ON or OFF. An alarm icon will appear on the display when active.
6.3 Adjusting Brightness (Dimmer)
The display brightness can be adjusted from 0% to 100%.
Rotate either the Puku Mauī ko te Koura Tika when not in time/alarm setting mode to adjust the display brightness from 0% (off) to 100% (brightest).
6.4 Mahi Koura
Ka tangi te whakaoho, pehia te rahi Whakatā button on top of the clock to temporarily silence the alarm for 9 minutes. The alarm will sound again after 9 minutes.
The large snooze button is easily accessible on top of the clock.
6.5 Alarm Modes (Sound, Vibration, Both)
Whakamahia te SOUND/VIBRATION/BOTH switch on the side of the clock to select your preferred alarm output:
Choose between vibration, sound, or both for your alarm.
- TANGI: Alarm will only use the selected sound.
- WIRIHI: Alarm will only use the bed shaker.
- RUA: Alarm will use both the selected sound and the bed shaker.
6.6 Te Whakaritea i te Rarahi Whakaoho
The alarm volume is adjustable up to 110dB. Use the ROTO button on the side of the clock to cycle through the available volume levels.
Adjust the alarm volume to your preference, up to 110dB.
6.7 Changing Alarm Sounds
The alarm clock offers three selectable alarm sounds: Buzzer, Bird, and Music. Use the HE WHAKAMARAMA button on the side of the clock to cycle through these options.
6.8 USB Whakahaerehia te Tauranga
A USB port is located on the back of the alarm clock for convenient charging of your mobile devices while you sleep.
Charge your smartphone or other USB-powered devices directly from the alarm clock.
6.9 12/24 Hōputu Hāora
Hei huri i waenga i nga whakatakotoranga 12-haora me te 24-haora, pehia te PANUITANGA TIME button (left knob) briefly when the time is displayed.
Easily switch between 12-hour and 24-hour time display.
7. Tiaki
- Te horoi: Horoia te karaka me te wiriwiri moenga ki te kakahu ngohengohe, maroke. Kaua e whakamahi i nga kai horoi me nga whakarewa.
- Rokiroki: Mena ka roa te rokiroki, tangohia ngā pākahiko tārua AAA hei ārai i te turuturu.
8. Te Raru
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Ko te whakaaturanga karaka kei te waatea. | Kaore he hononga hiko, he mana ranei outage. | Ensure power adapter is securely plugged in. Check wall outlet. If using battery backup, display will be off to conserve power, but time is kept. |
| Karekau te whakaoho e tangi/wiri. | Alarm not activated, wrong mode selected, or volume too low. | Ensure alarm is ON (icon visible). Check SOUND/VIBRATION/BOTH switch. Increase alarm volume. Ensure bed shaker is properly connected. |
| Bed shaker not vibrating. | Not connected, wrong mode, or power outage. | Ensure bed shaker is securely plugged into the clock. Set alarm mode to VIBRATION or BOTH. Note: Shaker does not work on battery backup. |
| Ko te utu USB kaore e mahi. | Device not connected, or power outage. | Ensure USB cable is properly connected to both the clock and your device. Note: USB charging does not work on battery backup. |
| Ka tautuhi anō i ngā tautuhinga Wā/Ara. | Power interruption without battery backup. | Install 2 AAA batteries for backup. |
9. Whakatakotoranga
- Waitohu: uscce
- Tauira: UE-188-Black
- Momo Whakaatu: LCD
- Puna Hiko: Corded Electric (AC-powered)
- Pūrua Pūhiko: 2 x AAA pākahiko (kaore i whakauruhia)
- Rahi Hua: 4.27"W x 4.12"H
- Taumaha Tūemi: 7.2 hekere (203.5 Karamu)
- Rōrahi whakaoho: Tae atu ki te 110dB
- Shaker Levels: 3 (HI, MED, LO)
- Haumaru: 0-100% ka taea te whakarite
- Tauranga Kaihoko USB: 1 tauranga
- Rauemi: Acrylonitrile Butadiene Styrene (Kirohiko)
- Tae: Pango
10. Pūtāhui me te Tautoko
uscce products come with a limited warranty. For any questions, comments, or warranty assistance, please do not hesitate to contact uscce customer support. We are always here to help.
Mōhiohio Whakapā: Please refer to the packaging or the official uscce webpae mo nga taipitopito whakapā tautoko kiritaki tino hou.