ZINUS Maddon Upholstered Platform Bed Frame with USB Ports Instruction Manual

Kupu Whakataki

Thank you for choosing the ZINUS Maddon Upholstered Platform Bed Frame. This manual provides essential information for the safe assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Nga korero haumaru

• Tiakina nga wahi iti katoa me nga taonga takai kia matara atu i nga tamariki.
• Huihuia te anga moenga ki runga i te mata ngawari, ma kia kore e pakaru.
• Me whakarite kia mau te kati me nga raka i mua i te whakamahi. Tirohia i ia wa me te whakapiri ano ina tika.
• Kaua e whakamahia ngā taputapu hiko mō te huihuinga, kei tino whakawhāiti pea, kei kino rānei ngā whakapiri.
• Kaua e tū ki runga i te anga moenga i te wā e huihui ana, e whakamahia ana rānei.
• Maximum weight capacity for Twin size is 350 lbs (158.75 kg).

Ihirangi mokete

All parts, tools, and instructions are conveniently located in the zippered compartment of the headboard. Please verify all components are present before assembly.

Image: All bed frame components and tools are securely stored within the headboard's zippered compartment for easy access.

Whakaritenga me nga Tohutohu Huihuinga

Assembly typically requires two people and can be completed in under an hour. Follow these steps carefully.

Hipanga 1: Wewete i nga Waahanga

Carefully remove all parts from the headboard compartment and lay them out on a clean, soft surface. Identify each component using the provided parts list.

Hipanga 2: Huihuia te Tāpare

Attach the side rails to the headboard and footboard using the provided bolts and Allen wrench. Ensure all connections are snug but do not overtighten initially.

Image: The fully assembled bed frame structure, ready for slat installation.

Hipanga 3: Tāutahia ngā Papa Rakau

Unroll the wood slats and place them evenly across the bed frame. Secure them to the side rails using the designated fasteners. The slats are designed to support your mattress directly, eliminating the need for a box spring.

Image: Detail of the wood slats, which attach with Velcro for stability and noise reduction.

Hipanga 4: Whakamutunga Whakamutunga

Once all components are in place, go back and fully tighten all bolts and screws. Place your mattress on the assembled frame.

Image: The ZINUS Maddon bed frame with a mattress, illustrating its complete appearance.

Operating Instructions (USB Ports)

Your ZINUS Maddon bed frame includes two integrated USB ports on the headboard for convenient device charging.

Image: A USB cable being plugged into one of the integrated USB ports on the headboard.

1. Ensure the bed frame is properly assembled and connected to a power source (if applicable, check for a power cord from the headboard).
2. Locate the USB ports on either side of the headboard.
3. Plug your device's USB charging cable into one of the available ports.
4. The ports provide power for charging compatible electronic devices.

Te tiaki

• Te horoi: The upholstered fabric should be dry cleaned only. Do not use liquid cleaners or abrasive materials.
• Ngā toromoka: Tirohia ngā pūtu me ngā tīwiri katoa i ia wā, i ia wā, kia mau tonu ai. Whakamaua anō mēnā e tika ana kia mau tonu ai te pumau.
• Nga papa: Ensure the wood slats remain properly positioned and secured to provide adequate mattress support.

Raparongoā

Nga Haruru

If the bed frame develops squeaking noises, check all bolts and screws and tighten them securely. Ensure the wood slats are properly seated and not rubbing against the frame.

USB Ports Not Functioning

Verify that the bed frame's power cord (if applicable) is securely plugged into a working electrical outlet. Test the USB ports with a different cable and device to rule out cable or device issues.

Tāpare Korekau

Ensure all connections are fully tightened. If instability persists, disassemble and reassemble the affected sections, paying close attention to the alignment of parts.

Whakatakotoranga

Image: Detailed dimensions for various sizes of the Maddon Platform Bed, including the Twin size (78.6"L x 41"W x 35"H).

Nga korero Whakaputanga

This ZINUS Maddon Upholstered Platform Bed Frame includes a worry-free 5-year limited warranty. For specific terms and conditions, please refer to the warranty card included with your product or visit the official Zinus webpae.

Tautoko Kiritaki

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Zinus Customer Support:

• Tuihono: Tirohia te Toa Zinus i runga i a Amazon
• Waea: Tirohia nga korero whakapā kei roto i to kete hua.