AMP Research BedStep Instruction Manual

Ka mutu te huaview

Ko te AMP Research BedStep is a frame-mounted, retractable truck step designed to provide easier access to your truck bed. It can be installed on either side of the truck box and deploys or retracts with a simple foot nudge. This product is proudly made in the USA with global materials.

Whakaahua: Te AMP Research BedStep shown in its deployed position, providing a sturdy step for bed access.

Nga Korero Haumaru Nui

• Always ensure the BedStep is fully deployed and stable before stepping on it.
• Do not exceed the maximum weight limit of 300 lbs on the BedStep.
• Keep hands and feet clear of moving parts during deployment and retraction.
• Regularly inspect the BedStep for any signs of damage or loose components.
• WHAKATŪPATO: Kei roto i tenei hua nga matū e mohiotia ana e te State of California hei mate pukupuku me te kino o te whanau. Mo etahi atu korero, tirohia www.P65Warnings.ca.gov.

Ihirangi mokete

Manatokona kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:

• BedStep Assembly
• Whakaekea taputapu
• Tohutohu Tāuta

Whakatakotoranga

Hototahi

Tenei AMP Research BedStep (Model 75417-01A) is designed to fit the following vehicles:

• 2019 - 2024 RAM 2500
• 2019 - 2024 RAM 3500

Note: This product specifically excludes Dually models.

Tohutohu Tāuta

The BedStep comes with all necessary hardware and vehicle-specific installation instructions. It is crucial to read and precisely follow the provided instructions for proper and safe installation.

1. Review Tohutohu: Before starting, thoroughly read the entire installation guide provided in the package. Familiarize yourself with all steps and required tools.
2. Kohikohi Utauta: Ensure you have all the necessary tools as specified in the instruction manual. Some users have noted the need for a 17/32 drill bit for certain installations.
3. Turanga: The BedStep mounts behind the cab, forward of the rear wheel. It can be installed on either the driver or passenger side. Carefully determine the optimal mounting location, considering any existing vehicle components like running boards or suspension.
4. Whakamātautau Whakatau: Before drilling or making permanent modifications, test fit the BedStep assembly with all bolts to ensure proper alignment and clearance. This is especially important to avoid interference with plastic trim or suspension components.
5. Whakaeke Haumaru: Follow the instructions for drilling and securing the frame-mounted brackets. Ensure all bolts are tightened to the specified torque settings.
6. Whakatikatika Whakamutunga: After initial installation, check the step's deployment and retraction. Adjust as needed to ensure smooth operation and proper alignment when retracted.

Image: Illustration of the BedStep components and mounting points on a truck chassis, highlighting the installation area.

Whakaahua: He taipitopito view of the BedStep's robust mechanism, showing the pivot points and construction.

Nga Tohutohu Whakahaere

Ko te AMP Research BedStep is designed for simple, foot-activated operation:

• Hei Hoatu: With your foot, gently nudge the BedStep downwards. The step will pivot and extend into its deployed position, providing a stable platform.
• Hei Tango: Using your foot, push the BedStep upwards and inwards towards the truck frame. The step will retract and store itself discreetly out of sight.

Image: A person demonstrating the use of the BedStep to easily access items in the truck bed.

Te tiaki

Ko te AMP Research BedStep is engineered for durability and minimal maintenance:

• Self-Lubricating Bushings: The step features self-lubricating bushings designed for all-weather performance, requiring no additional lubrication.
• Tirohanga Ia Wa: Periodically inspect all mounting hardware and pivot points for tightness and any signs of wear or damage. Ensure no debris is obstructing the step's movement.
• Te horoi: Clean the step and its components with mild soap and water as needed to remove dirt and grime. Avoid harsh chemicals that could damage the finish.

Raparongoā

Mena ka pa ki a koe nga raru o to AMP Research BedStep, consider the following:

• Step Not Deploying/Retracting Smoothly:
  • Check for obstructions around the pivot points or the step itself.
  • Ensure all mounting hardware is securely fastened. Loose bolts can affect operation.
• Fitment Issues (e.g., hitting vehicle components):
  • Review the installation instructions carefully. Some installations may require minor adjustments to the mounting position to clear factory running boards or suspension components.
  • Ensure the step is correctly aligned with the angle of the truck bed when retracted.
• Haruru rerekee:
  • Inspect for loose hardware or components that may be rubbing.
  • While the bushings are self-lubricating, extreme conditions might warrant a check for debris.

If troubleshooting steps do not resolve the issue, contact AMP Research customer support for assistance.

Pūtāhui me te Tautoko

AMP Research stands behind its products with a comprehensive warranty:

• Wā Pūtāhui: This product is covered by a 5-year/60,000-mile warranty.
• Kapi: Ka kapi te raihana i nga hapa o nga rawa me nga mahi i raro i te whakamahinga noa.
• Tukanga Kereme: For warranty claims or technical support, please refer to the contact information provided in your product packaging or visit the official AMP Rangahau webpae.

Mo etahi atu awhina, whakapaa mai AMP Research customer service directly.