APIELE GQ19AF-10EZ
APIELE 10 Amp 19mm Latching Push Button Switch User Manual
Model: GQ19AF-10EZ
Kupu Whakataki
This user manual provides detailed instructions for the installation, operation, and maintenance of the APIELE 10 Amp 19mm Latching Push Button Switch. This high-quality metal switch is designed for various applications, including automotive, motorcycle modification, and control equipment.
Nga korero haumaru
- Ensure power is disconnected before installation or maintenance to prevent electrical shock.
- Manatoko voltage and current ratings match your application to avoid damage to the switch or connected devices.
- Do not exceed the specified 10 Amp current rating or 12V operating voltage.
- Handle with care to avoid damaging internal components.
- Mena kāore koe i te tino mōhio ki ngā mahi tāutanga, whakapā atu ki tētahi tohunga hiko whai tohu.
Ka mutu te huaview
The APIELE 10 Amp 19mm Latching Push Button Switch features a durable metal construction and an integrated LED ring. It is designed for reliable performance in various environments.
Āhuatanga matua:
- Latching Operation: Push once for ON, push again for OFF.
- Whakatauranga o naianei teitei: 10 Amps.
- Whakamaramatanga LED: 12V LED ring for status indication.
- Hanga Roa: High-quality metal material.
- IP65 parewai: Suitable for wet or dusty environments.
- Roa Ora: Electrical life of 200,000 times, mechanical life of 1,000,000 cycles.
Waehanga:
The product includes the push button switch and a connector for wiring.
- 1 x Latching Push Button Switch
- 1 x Connector with pre-attached wires
Figure 1: APIELE 10 Amp 19mm Latching Push Button Switch (Red LED, Silver Stainless Steel).
Figure 2: Various angles of the APIELE push button switch, showcasintōna hoahoa pakari.
Figure 3: Comparison highlighting the larger press part and stronger contact terminals of the new design (right) compared to the old design (left).
Figure 4: Illustration of the switch's durability, rated for 200,000 press times and 40,000 hours of lamp ora.
Figure 5: Visual representation of the IP65 waterproof protection, indicating suitability for wet or dusty environments.
Whakatakotoranga
| Whakatakotoranga | Uara |
|---|---|
| Tau tauira | GQ19AF-10EZ |
| Rahi Puka Whakapuru | 19mm (3/4 inihi) |
| Aratau Mahi | Latching (ON-OFF) |
| Whirihoranga Whakapā | 1NO (Normally Open) |
| Whakatauranga o naianei | 10 Amps |
| Mahinga Mahi Voltage | 12 Volts (for LED) |
| Tohu Tiaki | IP65 parewai |
| Te Ora Hiko | 200,000 wa |
| Te Ora Miihini | 1,000,000 huringa |
| Rauemi Anga | Stainless Steel (Silver) |
| Momo Kapeka | tīwiri |
| Hunga Hua | 1.57 x 0.39 x 1.18 inihi |
Figure 6: Detailed technical specifications and dimensions of the switch.
Tatūnga me te Tāuta
Follow these steps for proper installation of your APIELE Latching Push Button Switch.
Hoahoa Waea:
The switch comes with a pre-wired connector for ease of installation. Refer to the diagram below for pin assignments:
- Waea Whero: Positive LED Pin "+"
- Waea Pango: Negative LED Pin "-"
- Waea Kahurangi: Normal Open Pin
Figure 7: Wiring diagram showing the function of each colored wire on the connector.
Hipanga Tāuta:
- Whakaritea te Pōka Whakamau: Drill a 19mm (3/4 inch) diameter hole in the desired mounting surface.
- Insert Switch: Insert the switch body into the prepared hole from the front.
- Haumaru ki te Nati: Thread the securing nut onto the switch body from the back and tighten it to hold the switch firmly in place.
- Tūhono Waea: Attach the provided connector to the switch terminals. Ensure correct polarity for the LED function.
Figure 8: Visual guide for the installation process of the push button switch.
Video 1: This video demonstrates the features and installation of the 10 Amp Latching Push Button switch, including its waterproof capabilities and various applications.
Nga Tohutohu Whakahaere
The APIELE Latching Push Button Switch operates with a simple ON-OFF mechanism.
- To turn on the connected device, press the button once. The LED ring will illuminate, indicating the switch is in the ON state.
- To turn off the connected device, press the button again. The LED ring will turn off, indicating the switch is in the OFF state.
Video 2: This video showcases the functionality of the 10 Amp 19mm Latching/Momentary Push Button Switch, demonstrating its use in various applications like automotive dashboards and coffee machines.
Nga tono:
This versatile switch is suitable for a wide range of applications, including but not limited to:
- Automobile and motorcycle modifications
- Control equipment switch modifications
- Doorbell buttons
- SOS buttons
- Elevator buttons
- Nga taputapu whare
Whakaahua 9: Examples of common applications for the APIELE push button switch, including doorbell, car, and elevator buttons.
Te tiaki
The APIELE Latching Push Button Switch is designed for minimal maintenance due to its durable construction and IP65 waterproof rating.
- Te horoi: Wipe the switch surface with a soft, damp kakahu. Āta karohia te whakamahi i ngā kaihoroi whakakoi, i ngā whakarewa rānei ka kino pea te whakaotinga, ngā wāhanga rānei o roto.
- Tirotiro: Tirohia ngā hononga waea i ia wā, i ia wā, kia mōhio ai kei te mau tonu, ā, kāore he waikura.
- Tiaki Taiao: While waterproof, prolonged submersion is not recommended. Ensure the mounting area is properly sealed if exposed to extreme moisture.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Switch does not activate/deactivate device. | Incorrect wiring; Loose connection; No power to circuit; Faulty device. | Check wiring against diagram (Figure 7); Ensure all connections are secure; Verify power supply to the circuit; Test the connected device independently. |
| Kare e marama te LED. | Incorrect LED wiring polarity; No power to LED circuit; Damaged LED. | Check LED wire polarity (Red for +, Black for -); Verify 12V power supply to LED pins; If LED is damaged, the switch may need replacement. |
| Switch feels loose after installation. | Mounting nut not tightened sufficiently. | Tighten the securing nut on the back of the switch. |
Pūtāhui me te Tautoko
APIELE products are manufactured to high standards. For any issues or support inquiries, please contact APIELE Electric directly through their official channels or the retailer from whom the product was purchased.
Tirohia te APIELE Store on Amazon mo etahi atu korero me nga whiringa whakapā.