1. Hua Neke Atuview
The Flex LBE 17-11 125 is a powerful and high-quality angle grinder designed for cutting, deburring, and grinding tasks. It incorporates advanced features for enhanced performance, safety, and durability.
- Microprocessor Electronics: Features soft start, restart interlock after power failure, overload protection, and constant electronics (CDC) for consistent performance.
- Mechanical Brake: Ensures the tool stops quickly, within 3.5 seconds, for increased safety.
- Anti-Kickback Function: Automatically switches off the motor if the disc jams, preventing dangerous kickback.
- Te Motika Nui: Designed for high load capacity and efficiency, delivering strong power output.
- Optimized Durability: Efficient air ducting and optimized carbon geometry contribute to a long service life.
- Dust Sealing: Sophisticated dust sealing protects the motor and gearbox from abrasive dust.
- Hoahoa Ergonomic: Compact and ergonomic form for comfortable handling.
- Whakatikatika Kaitiaki Kore Utauta: The protective guard can be adjusted without the need for additional tools.
- SoftVib Handle: Features an integrated patented clamping nut wrench and vibration damping for reduced fatigue.
2. Nga Tohutohu Haumaru
Always observe general power tool safety warnings and specific instructions for angle grinders. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.
Haumaru Whānui
- Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, gloves, and a dust mask.
- Me whakarite kia mau te taputapu mahiamped before operation.
- Keep hands clear of rotating parts and the cutting/grinding area.
- Kaua e whakahaere i te taputapu i roto i nga hau pupuhi, penei i te waahi o te wai ka mura, te hau, te puehu ranei.
- Tiakina nga tamariki me nga tangata e tu ana i te wa e whakahaere ana i te taputapu hiko.
Haumaru Hiko
- Whakaritehia te voltagE ōrite ana a e ki te whakatauranga kei te pereti ingoa o te taputapu.
- Kaua e tukinotia te taura. Kaua rawa e whakamahia te taura mo te kawe, te toia, te wetewete ranei i te taputapu hiko. Puritia te aho mai i te wera, te hinu, te koi o nga taha, nga waahanga neke ranei.
- Mena kei te whakahaere i tetahi taputapu hiko i roto i te panuiamp kare e taea te karo i te waahi, whakamahia he taputapu whakamarumaru o naianei (RCD).
Specific Angle Grinder Safety
- Always use the protective guard. Ensure it is correctly positioned and securely fastened.
- Use only discs that are rated for the maximum speed of the grinder and are suitable for the material being worked on.
- Never use cutting discs for side grinding.
- Be aware of the anti-kickback feature; if the disc jams, the motor will shut off. Release the switch and clear the obstruction before restarting.
- Allow the disc to come to a complete stop using the mechanical brake before setting the tool down.
3. Nga Waahanga me nga waahanga
Wae matua:
- Tinana Matua: Houses the motor, electronics, and gearbox.
- Kaitiaki Tiaki: Adjustable, tool-free guard for user protection.
- SoftVib Handle: Ergonomic side handle with vibration damping and integrated wrench.
- Pātene Maukati Āmio: For easy disc changes.
- Whakawhiti Kiriata: Lockable for continuous operation.
- Speed Selection Dial: For variable speed control (see Figure 2).
- Puawai Hau: For motor cooling and dust expulsion.
4. Tatūnga
Attaching the SoftVib Handle
The SoftVib handle can be screwed into either the left or right side of the gearbox housing, depending on user preference and application. Ensure it is tightened securely.
Mounting the Protective Guard
The protective guard is tool-free adjustable. Position it to provide maximum protection for your specific task. Ensure it clicks securely into place.
Installing the Grinding/Cutting Disc
- Unplug the tool from the power supply.
- Pēhia me te pupuri i te paatene maukati miro.
- Place the inner clampka mau i te flange ki runga i te miro.
- Whakanohoia te kopae 125mm e hiahiatia ana ki runga i te taha o roto, me te noho kare.
- Miu i runga i te clamping nut (M14) and tighten it firmly using the integrated wrench in the SoftVib handle.
- Tukua te patene maukati miro.
5. Nga Tohutohu Whakahaere
Te Hia/Weto
- To switch on, push the slide switch forward. For continuous operation, push it further forward until it locks into place.
- To switch off, release the slide switch. If locked, press the rear part of the switch to release it.
Mana Tere Taurangi
The speed selection dial (Figure 2) allows you to adjust the no-load speed between 2800 and 11500 rpm. Select the appropriate speed for the material and application. Lower speeds are generally used for polishing or working with sensitive materials, while higher speeds are for cutting and grinding.
Using the Mechanical Brake
The integrated mechanical brake stops the disc within 3.5 seconds after the tool is switched off. This enhances safety by quickly stopping rotation.
Working with the Grinder
- Kia mau ki nga ringa e rua te miihini miihini i nga wa katoa.
- Allow the tool to reach full operating speed before contacting the workpiece.
- Apply steady, even pressure. Do not force the tool, as this can lead to overheating or disc damage.
- For cutting, use a slight rocking motion to prevent the disc from binding.
- Be mindful of sparks and debris. Direct them away from yourself and others.
6. Tiaki
Regular maintenance ensures the longevity and safe operation of your Flex angle grinder.
Te horoi
- Wewetehia te taputapu i mua i te horoi.
- Regularly clean the ventilation slots to prevent dust buildup, which can lead to overheating. Use compressed air if available.
- Wipe the exterior of the tool with a damp kakahu. Kaua e whakamahi i nga matū kino me nga horoi horoi.
Te Tote Hariki
The optimized carbon geometry contributes to long brush life. If the tool's performance significantly drops or sparks excessively, the carbon brushes may need inspection or replacement. This should ideally be done by a qualified service technician.
Rokiroki
Store the angle grinder in a dry, secure place, out of reach of children and unauthorized users.
7. Te Raru
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore e timata te taputapu | Karekau he hiko Restart interlock activated (after power failure) Taura hiko pakaru | Tirohia te hononga hiko Unplug and re-plug the tool Inspect cord for damage; replace if necessary (by qualified personnel) |
| Ka mutu te taputapu i te wa e mahi ana | Kua whakahohehia te parenga taumaha Disc jammed (anti-kickback activated) | Whakaitihia te pēhanga; tukua te taputapu kia whakamatao Release switch, clear obstruction, then restart |
| Te wiri nui | Worn or damaged disc Kōpae hē te whakanoho kakau wetekina | Whakakapia te kōpae Re-mount disc correctly, ensure clamping nut is tight Tighten SoftVib handle |
| Reduced performance / Excessive sparking | Nga paraihe waro kua mau Dust buildup in vents | Have brushes inspected/replaced by service center Clean air vents thoroughly |
8. Whakatakotoranga
| Te ahuatanga | Uara |
|---|---|
| Tau tauira | 447668 |
| Whakauru Mana | 1700 W |
| Putanga Mana | 1050 W |
| Voltage | 230 V |
| Auautanga | 50/60 Hz |
| Max. Kopae Diamita | 125 mm |
| Tere kore-uta | 2800-11500 rpm |
| Tool Holder (Angle Grinder) | M14 |
| Te roa o te taura | 4 m |
| Ahu (L x W x H) | 340 x 77 x 105 mm |
| Taumaha | 2.6 kg |
| Tae | Red, Black, Silver |
| Rauemi | Te whakarewa |
9. Pūtāhui me te Tautoko
Specific warranty details for this product may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for precise information.
Regarding spare parts availability, information is currently unavailable. For technical support, service, or inquiries about replacement parts, please contact Flex customer service or an authorized Flex service center in your region. Contact details can typically be found on the official Flex webpae, i runga ranei i to putunga hua.