Kupu Whakataki
This manual provides essential instructions for the safe installation, operation, and maintenance of your JONATHAN Y Apollo JYL6134A 3-Light LED Pendant Light. Please read this manual thoroughly before beginning installation and retain it for future reference.
Nga korero haumaru
WHAKATŪPATO: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Improper installation can result in injury or death.
- All electrical connections must be in accordance with local codes and ordinances, National Electric Code (NEC), and ANSI/NFPA 70-1999.
- Me toro atu ki tetahi tohunga hiko ki te kore koe e tino mohio mo te tukanga whakauru.
- This fixture must be hardwired. Professional installation is recommended.
- Kaua e honoa tenei taputapu ki tetahi punaha hiko koretake.
- Kaua e nui ake i te wat kua tohuatage mo nga topuku.
- Me whakarite kia mau nga hononga katoa i mua i te whakahokinga hiko.
Ihirangi mokete
Manatokona kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:
- Pereti Maunga
- Karekau
- Pendant Shades (3)
- Rama Rama (3)
- Whakanuia nga taputapu (ngu, nati waea)
Whakaatu 1: Neke Atuview of the JONATHAN Y Apollo 3-Light LED Pendant Light components and features.
Tatūnga me te Tāuta
Professional installation by a qualified electrician is recommended for this hardwired fixture.
- Whakaweto Hiko: Before starting, ensure the power to the circuit is turned off at the main electrical panel.
- Whakapaia te Pereti Whakaeke: Attach the mounting plate to the junction box in the ceiling using the provided screws.
- Whakatikatikahia te Teitei o te Taura: Each pendant's cord length is adjustable. Determine the desired hanging height for each light and secure the cord at the canopy.
- Hononga Waea: Connect the fixture's wires to the corresponding household wires (black to black, white to white, ground to ground) using the provided wire nuts. Ensure all connections are secure.
- Āpiti Canopy: Carefully push the canopy up to the ceiling, covering the junction box and wiring. Secure it with the provided screws.
- Tāuta Topuku: Screw the included LED bulbs into each pendant socket.
- Whakaora i te Mana: Once installation is complete and all connections are secure, restore power at the main electrical panel.
Figure 2: Key features for installation, including adjustable height and easy assembly.
Ataata 1: Kua mutu he hua potoview of the JONATHAN Y Apollo 3-Light LED Pendant Light, showcasing its design and features relevant to installation.
Nga Tohutohu Whakahaere
- Hiko Whakaka/Weto: Operate the light using a standard ON/OFF wall switch.
- Taumahi Ngahuru: This fixture is dimmable. To utilize the dimming feature, ensure you have a compatible dimmer switch installed and dimmable LED bulbs.
- Te Tino Whakatikatika: The height of each pendant can be adjusted during installation to suit your preference and space requirements.
Te tiaki
- Te horoi: To clean the fixture, turn off the power and wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Whakakapi Purama: Ensure power is off before replacing bulbs. Use E26 base LED bulbs, not exceeding 40 watts per bulb.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kāore te mārama e whiti. | Power is off; loose wiring; faulty bulb. | Check circuit breaker; verify wire connections; replace bulb. |
| Ka whiti marama. | Loose bulb; incompatible dimmer; unstable power supply. | Tighten bulb; ensure dimmer compatibility; consult electrician. |
| Pendant appears crooked. | Uneven cord adjustment. | Re-adjust cord length for desired alignment. |
Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Tau tauira | JYL6134A |
| Ahu | 33.5"L x 6"W x 10.5"H |
| Rauemi | Te whakarewa |
| Tae/Whakaoti | Black/Brass Gold |
| Momo Puna Maama | LED |
| Putunga Pupura | E26 |
| Te maha o nga rama | 3 |
| Max Wattage ia Pupura | 40 watts |
| Voltage | 120 Volts |
| Tirohanga | 800 Lumen (per included bulb) |
| Te Paemahana Tae | 2700 Kelvin (Ma mahana) |
| Momo Tāuta | Flush Mount (Ceiling Mount) |
| Nga waahanga motuhake | Dimmable, Adjustable Height |
| Mahinga o roto/waho | Roo-roto |
| Taumaha Tūemi | 5.59 pauna |
Figure 3: Detailed dimensions of the pendant light fixture.
Pūtāhui me te Tautoko
Pūtāhui: This product comes with a 30-day manufacturer warranty for defects only. Normal wear and tear is not warranted. Visible damages not noted upon delivery will be determined to be customer damage and will not be warranted. All products are inspected upon arrival, and worn, dirty, or stained merchandise will not be accepted for warranty claims.
For warranty information or support, please contact the internet customer service center.
Video 2: Another product overview from JONATHAN Y, providing additional visual details of the pendant light.