Nga Korero Haumaru Nui
Please read and understand all instructions before using this product. Keep this manual for future reference.
- Pūmate Kakaina: Keep cords out of reach of children. Never place the camera or cords within 3 feet (1 meter) of the crib or playpen. Secure cords to a wall or floor using clips to prevent entanglement.
- Pūmate Koowao: Kei roto i tenei hua nga waahanga iti. Kaua e taea e nga tamariki.
- Te wera nui: Do not cover the monitor or camera with clothing, blankets, or other objects. Ensure proper ventilation.
- Te wai me te makuku: Kaua e tukua te hua ki te ua, ki te makuku rānei. Kaua e whakamahia ki te taha o te wai (hei tauira, te kaukau, te totohu).
- Puna Hiko: Use only the AC power adapters provided. Using other adapters may damage the device and void the warranty.
- pokanoa: This product operates on a 2.4 GHz frequency. Keep away from other 2.4 GHz devices (e.g., Wi-Fi routers, microwaves) to avoid interference.
- Te pāmahana: Operate and store the product within the recommended temperature range (0°C to 40°C / 32°F to 104°F).
Ihirangi mokete
Manatokona kei roto katoa nga mea kei roto i to kete:
- Waeine Matua (Aroturuki)
- Wae Peepi (Kamera)
- Power Adapter for Parent Unit
- Power Adapter for Baby Unit
- Aratohu Tohutoro Tere
Image: All components included in the Dragon Touch DT40 baby monitor package, including the monitor, camera, two power adapters, and a quick reference guide.
Ka mutu te huaview
Waeine Matua (Aroturuki)
The parent unit features a 4.3-inch color LCD screen for clear video monitoring. It includes controls for volume, brightness, menu navigation, two-way audio, and lullaby playback.
Wae Peepi (Kamera)
The baby unit is equipped with a camera that provides video and audio feedback. It includes infrared LEDs for automatic night vision, a temperature sensor, and a microphone for two-way communication. The camera can be manually adjusted for optimal viewnga koki.
Image: The baby unit camera, illustrating its ability for manual rotation of 360 degrees horizontally and 60 degrees vertically for flexible positioning.
Tatūnga
1. Te Whakautu i te Wāhanga Matua
- Connect the small end of the parent unit power adapter to the DC input port on the side of the parent unit.
- Monohia tetahi pito o te urutau ki tētahi putanga hiko paerewa.
- Charge the parent unit for at least 8 hours before first use to ensure optimal battery performance. The battery icon on the screen will indicate charging status.
2. Powering the Baby Unit
- Connect the small end of the baby unit power adapter to the DC input port on the back of the baby unit.
- Plug the other end of the adapter into a standard electrical outlet. The baby unit will power on automatically.
3. Whakatakoto kamera
Place the baby unit on a flat surface, such as a dresser or shelf, or mount it on a wall. Ensure it is at least 3 feet (1 meter) away from the baby's crib or playpen. Adjust the camera angle manually to get the best view o to pepi.
Image: An illustrative floor plan showing how multiple cameras can be strategically placed in different rooms for comprehensive monitoring.
4. Te Honohono (Mēnā e Tika Ana)
The parent and baby units are pre-paired at the factory. If the connection is lost or you are adding additional cameras, follow these steps:
- I te wae matua, pēhi i te Tahua pātene.
- Whakatere ki te Kāmera icon ka kowhiri Tāpiri Kāmera.
- Pehia te takirua button on the back of the baby unit within 10 seconds.
- The parent unit will display a confirmation message once pairing is successful.
Nga Tohutohu Whakahaere
Te Hiko / Whakaweto
- To power on the parent unit, press and hold the Mana pēhi i te pātene kia mārama rā anō te mata.
- Ki te whakaweto, patohia kia mau te Mana pēhi i te pātene kia whakaweto rā anō te mata.
- The baby unit powers on automatically when connected to power.
Whakaritenga Rōrahi
Whakamahia te Rōrahi Whakarunga (+) a Raro Whakararo (-) buttons on the parent unit to adjust the listening volume.
Whakaritenga Tirohanga
Access the menu on the parent unit and navigate to the Tirohanga setting to adjust the screen's illumination.
Ororongo Waa-rua
Patohia me te pupuri i te Korero button on the parent unit to speak to your baby through the camera's speaker. Release the button to hear your baby again.
Image: A couple in a kitchen, with an inset showing a baby in a room and the monitor displaying the baby, illustrating the two-way talk audio feature.
Nga here
Pehia te Whakatangitangi button on the parent unit to play soothing melodies. Press again to cycle through available lullabies or turn them off.
Image: A sleeping baby with the baby unit camera, musical notes, and a thermometer icon, highlighting the lullaby playing and temperature monitoring features.
VOX Mode (Voice Operated Exchange)
VOX mode conserves battery by turning off the screen when no sound is detected from the baby unit. The screen will automatically turn on when sound is detected.
- To activate/deactivate VOX mode, press the VOX button on the parent unit or navigate through the menu.
- You can adjust the VOX sensitivity level in the menu settings.
Image: A split image showing the monitor screen in VOX ON mode (screen off with sleeping baby) and VOX OFF mode (screen on with active baby), demonstrating the voice activation feature.
Matakitenga Po
Ka whakahohe aunoa te waeine pēpi i te tirohanga pō whero-whero i ngā āhuatanga mārama iti, ka puta he ahua pango-mā mārama ki te waeine matua.
Image: A comparison of the monitor display in night vision (black and white, sleeping baby) and day vision (color, sleeping baby), highlighting the automatic night vision capability.
Te Aroturuki i te pāmahana
The baby unit's built-in temperature sensor monitors the room temperature and displays it on the parent unit's screen. You can set temperature alerts in the menu.
Kāmera Maha View (Mehemea e tika ana)
If you have multiple cameras paired, use the Matawai button or navigate through the menu to switch between camera views or activate auto-scan mode.
Te tiaki
- Te horoi: Use a soft, dry cloth to clean the surfaces of the parent and baby units. Do not use cleaning sprays or liquid cleaners.
- Tiaki Pūhiko: To prolong battery life, fully charge the parent unit before first use. Avoid completely draining the battery frequently. If storing the unit for an extended period, charge it periodically.
- Rokiroki: Whakaorangia te hua ki te waahi makariri, maroke atu i te ra tika me te wera nui.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| No picture/sound on parent unit | Parent unit is off or battery is low. Baby unit is not powered on. Units are out of range. | Ensure parent unit is charged and powered on. Verify baby unit is plugged in and powered. Move parent unit closer to baby unit. |
| He pai te pikitia/te kounga oro | Interference from other devices. Units are too far apart. Obstructions between units. | Move units away from other 2.4 GHz devices. Reduce distance between units. Remove obstacles like thick walls. |
| Ka tere te heke o te pākahiko wae matua | VOX mode is off. Screen brightness is too high. Battery degradation over time. | Activate VOX mode. Reduce screen brightness. Ensure initial full charge. Consider battery replacement if unit is old. |
| Cannot pair camera | Pairing process not followed correctly. | Repeat pairing steps carefully, ensuring the pair button on the camera is pressed within the time limit. |
Whakatakotoranga
- Tauira: DT40
- Rahi Mata: 4.3 Inihi
- Hangarau Hononga: Wireless (2.4 GHz FHSS)
- Taumira Hopu Ataata: 720p
- Nga waahanga motuhake: Night Vision, Two-Way Audio, Temperature Monitoring, Lullabies, VOX Mode
- Whakauru Hiko: 5 Volts
- Pikohiko e hiahiatia ana: Yes (for Parent Unit)
- Momo Whakapuru: Wall Mount (for Camera)
- Taumaha Tūemi: Tata ki te 1.1 pauna
- UPC: 818537028769
Pūtāhui me te Tautoko
Dragon Touch products come with a limited warranty. For detailed warranty information, technical support, or customer service inquiries, please refer to the warranty card included in your package or visit the official Dragon Touch website. Please have your model number (DT40) and purchase information ready when contacting support.