Ka mutu te huaview
The Sofirn 1200 Lumen Rechargeable Headlamp (Model NBT-001) is a versatile and powerful lighting solution designed for various activities including camping, running, hiking, and emergency use. It features a bright SST40 LED, multiple lighting modes, and convenient USB-C recharging.
Figure 1: Sofirn 1200 Lumen Rechargeable Headlamp with adjustable strap.
Āhuatanga matua:
- Tino kanapa: SST40 LED delivers 1200 lumens maximum output.
- Aratau Maha: Features 5 different modes: Low, Medium 1, Medium 2, High, Turbo.
- USB-C Ka taea te utu: Convenient hidden USB-C port for easy charging.
- Hanga Roa: Aircraft-grade aluminum alloy case with hard-anodized finish, tough and waterproof.
- Māmā me te hāneanea: Weighs approximately 2.9 ounces with a fully adjustable headband.
Ihirangi mokete
Me whakarite kei roto katoa nga mea kei roto i to kete:
- 1x Sofirn Headlamp
- 1x Rechargeable Battery (pre-installed or separate)
- 1x USB-C Uera Whakatau
- 1x Manual Kaiwhakamahi (tenei tuhinga)
Tatūnga
1. Battery Installation & First Use
Te paneamp comes with a rechargeable Lithium Polymer battery. It may be pre-installed or require insertion.
- Unscrew the end cap of the headlamp ki te uru atu ki te wahanga pākahiko.
- Insert the provided 18650 Lithium Polymer battery with the positive (+) end facing towards the headlamp's LED end.
- Securely screw the end cap back on.
- I mua i te whakamahinga tuatahi, whakakiia katoatia te upokoamp.
2. Charging the Headlamp
The Sofirn headlamp features a hidden USB-C charging port for convenient recharging.
- Locate the hidden USB-C port on the side of the headlamp. It is usually protected by a cap or a rotating section of the body.
- Connect the provided USB-C cable to the headlamp's port and the other end to a standard USB power source (e.g., wall adapter, power bank, computer USB port).
- An indicator light will show the charging status (e.g., red for charging, green for full).
- Once fully charged, disconnect the cable and ensure the USB-C port is properly sealed to maintain waterproof integrity.
Whakaahua 2: Te paneamp features a hidden USB-C charging port for convenience.
Figure 3: Detail of the USB-C port, typically protected by a rotating collar.
3. Te Whakatikatika i te Parepare
The elastic headband is fully adjustable to fit various head sizes or to be worn over a hard hat.
- Whakanohoia te paneamp on your head or hard hat.
- Adjust the straps by pulling them through the buckles until a comfortable and secure fit is achieved.
Figure 4: The headband is adjustable for a comfortable fit, and the lamp head can pivot 180 degrees.
Nga Tohutohu Whakahaere
Te Hia/Weto me te Kōwhiringa Aratau
Te paneamp features a simple user interface with a single power button.
Figure 5: The comfortable power button with simple UI and memory mode.
- Ki te huri ON te paneamp, pehia te paatene mana kotahi.
- Ki te huri WATE te paneamp, press the power button once again.
- To change brightness modes (Low, Medium 1, Medium 2, High, Turbo), press and hold the power button while the light is on. The headlamp will cycle through the modes. Release the button to select the desired mode.
- Te paneamp has a memory function and will turn on in the last used brightness mode.
- For special modes like Strobe, a quick double-press or triple-press might activate it (refer to specific product documentation if available, as this is a common flashlight feature).
Te whakatikatika i te koki kurupae
Te paneamp unit can be tilted up or down to direct the light where needed.
- Gently tilt the headlamp body within its bracket to adjust the beam angle up to 180 degrees.
Whakaahua 6: Te paneamp offers 180-degree rotation for flexible lighting.
Whakaahua 7: Example of the headlamp's wide and powerful beam.
Te tiaki
- Te horoi: Horoia te paneamp me te ngawari, damp kakahu. Kaua e whakamahi i nga kai horoi me nga whakarewa.
- Tiaki Pūhiko:
- Whakakīia te pākahiko i ia wā, ahakoa kāore e whakamahia pinepinetia, kia roa ai tōna ora.
- A ape i te tuku katoa i te pākahiko.
- If storing for extended periods, charge the battery to about 50% and store in a cool, dry place.
- The battery can be removed and charged externally with a compatible 18650 charger if desired.
- Ātete wai: Te paneamp is waterproof. Ensure the USB-C port cover is securely closed to maintain its water resistance rating (IP65).
- Rokiroki: Whakaorangia te paneamp i te wahi maroke matara atu i te ra tika me te wera nui.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Tihiamp kaore e huri. | Kua mate te pākahiko, kua he ranei te whakaurunga. | Charge the battery. Ensure the battery is inserted with correct polarity (+/-). |
| Ko te marama he atarua, he korikori ranei. | Te utu iti o te papahiko. | Whakaorangia te pākahiko kia tino. |
| Tihiamp ka mahana i te wā e whakamahia ana. | Normal operation, especially on High/Turbo modes. | This is expected due to high lumen output. If it becomes excessively hot, reduce brightness or turn off briefly. |
| USB-C port not charging. | Cable issue, port obstruction, or power source problem. | Try a different USB-C cable and power source. Ensure the port is clean and free of debris. |
Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Waitohu | Sofirn |
| Tau tauira | NBT-001 |
| Puna Maama | SST40 LED |
| Tirohanga | Tae atu ki te 1200 Lumens |
| Puna Mana | Whakahikohia te Pūhiko (Ka taea te utu) |
| Momo Pūhiko | 1x Lithium Polymer (18650) |
| Tauranga Whakatau | USB-C |
| Rauemi | Kohanga Aluminum-rererangi |
| Ātete wai | Waterproof (IP65 rating implied by "waterproof" and common for headlamps) |
| Taumaha Tūemi | 2.82 hekere (tata ki te 80 karamu) |
| Hunga Hua | 3.39"D x 0.98"W x 0.98"H |
Pūtāhui me te Tautoko
This Sofirn headlamp haere mai me a 1-tau pūtāhui mai i te ra o te hokonga, e kapi ana i nga hapa hangahanga. Tena koa pupurihia to tohu mo te hoko mo nga kereme whakamana.
For technical support, warranty claims, or further inquiries, please contact Sofirn customer service through the retailer where the product was purchased or visit the official Sofirn webpae.