TECNOSWITCH CR025BI Digital Weekly Wall Thermostat User Manual

1. Kupu Whakataki

This manual provides detailed instructions for the installation, operation, and maintenance of your TECNOSWITCH CR025BI Digital Weekly Wall Thermostat. Please read this manual carefully before installation and use to ensure proper functionality and to avoid any potential issues. Keep this manual for future reference.

2. Hua Neke Atuview

The TECNOSWITCH CR025BI is a programmable digital thermostat designed for controlling heating and cooling systems. It features a clear blue backlit LCD display for easy reading and intuitive controls for daily or weekly programming.

Whakaahua 1: TECNOSWITCH CR025BI Digital Weekly Wall Thermostat. This image shows the TECNOSWITCH CR025BI digital weekly wall thermostat. The device is white with a hinged cover. When open, it reveals a central LCD display, surrounded by a circular arrangement of time markers. Below the display are various control buttons, including temperature adjustment (+/-), mode selection (heating/cooling), and confirmation (OK). The display is backlit in blue.

Āhuatanga matua:

• Blue backlit LCD display
• Daily or weekly programming options
• Te mahi whakawera me te whakamatao
• Temperature regulation range: +5°C to +35°C
• Thermal differential: +/- 0.3°C
• Minimum programming interval: 30 minutes
• Power reserve for program retention during battery changes

3. Nga korero haumaru

• Installation should only be performed by a qualified electrician in accordance with local electrical codes.
• Always disconnect power to the heating/cooling system at the main circuit breaker before installing or servicing the thermostat.
• Kaua e tukuna te whakamaarama ki te wai, ki te makuku nui ranei.
• Use only AA alkaline batteries. Do not mix old and new batteries or different types of batteries.

4. Tāuta (Tatūnga)

4.1. Tauwāhi Maunga

Choose an indoor wall location approximately 1.5 meters (5 feet) from the floor, away from direct sunlight, drafts, and heat sources (e.g., radiators, televisions) that could affect temperature readings.

4.2. Tāuta Pūhiko

1. Open the front cover of the thermostat.
2. Insert two (2) AA alkaline batteries into the battery compartment, observing the correct polarity (+/-).
3. The thermostat will power on, and the display will activate. The batteries provide approximately 1 year of autonomy. The device includes a power reserve to maintain programmed settings during battery replacement.

4.3. Hononga Hiko

WARNING: Disconnect power at the main circuit breaker before proceeding.

1. Remove the thermostat's backplate from the main unit.
2. Connect the system wires to the appropriate terminals on the backplate. The contact rating is 8(5)A at 250Vac. Refer to your heating/cooling system's wiring diagram for specific connections.
3. Secure the backplate to the wall using screws.
4. Attach the main thermostat unit to the backplate, ensuring it clicks securely into place.
5. Whakahokia te hiko i te kaaiti iahiko matua.

5. Mahi

5.1. Te Tautuhinga Wā me te Rā o nāianei

Upon initial power-up or after a prolonged power loss, you may need to set the current time and day. Consult the specific instructions in your thermostat's full manual for the exact button sequence. Generally, this involves pressing a 'SET' or 'CLOCK' button, using '+' and '-' buttons to adjust values, and 'OK' or 'SET' to confirm.

5.2. Selecting Operating Mode (Heating/Cooling)

The thermostat supports both heating and cooling functions. Use the mode selection button (often indicated by a snowflake for cooling and a flame for heating, or a simple 'MODE' button) to switch between modes. The current mode will be displayed on the LCD.

5.3. Te Whakarereke i te Pawera

In manual mode, use the '+' and '-' buttons to set your desired temperature. The thermostat will maintain the room temperature within the range of +5°C to +35°C with a thermal differential of +/- 0.3°C.

6. Papatonotanga

The CR025BI allows for daily or weekly programming, enabling you to set different temperatures for various times of the day and days of the week. The minimum programming interval is 30 minutes.

6.1. Ka uru ki te Aratau Papatono

Press the 'PROG' or 'P' button to enter programming mode. The display will typically show a day of the week and a time slot for adjustment.

6.2. Setting Programs

1. Use the 'DAY' button to select the day or group of days you wish to program (e.g., Monday-Friday, Saturday-Sunday, or individual days).
2. Use the 'TIME' or arrow buttons to navigate through the 30-minute time intervals.
3. Use the '+' and '-' buttons to set the desired temperature for each time interval.
4. Repeat for all desired time slots and days.
5. Press 'OK' or 'PROG' again to exit programming mode and save your settings.

Refer to the detailed programming section in your full user manual for advanced programming options and specific button functions.

7. Tiaki

7.1. Whakakapinga Pūhiko

When the low battery indicator appears on the display, replace the two AA alkaline batteries promptly. The thermostat has a power reserve feature that will retain your programmed settings for a short period during battery replacement.

1. Whakatuwheratia te uhi o mua.
2. Tangohia nga pākahiko tawhito.
3. Whakauruhia kia rua ngā pākahiko AA kawakore hou, kia tika ai te polarity.
4. Katia te uhi o mua.

7.2. Te horoi

Clean the thermostat's exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray directly onto the unit.

8. Te Raru

• He waatea te whakaaturanga: Check if batteries are correctly inserted or need replacement.
• System not responding: Ensure the thermostat is in the correct operating mode (heating/cooling). Check the main power supply to your heating/cooling system. Verify wiring connections.
• He hē te pānui pāmahana: Me whakarite kia kore te whakamaarama e pa ana ki te ra tika, ki nga tauira, ki nga puna wera ranei.
• Nga take whakahōtaka: Re-enter programming mode and verify all settings. Ensure the current time and day are set correctly.

If problems persist, consult a qualified technician or contact TECNOSWITCH customer support.

9. Whakatakotoranga

10. Pūtāhui me te Tautoko

For warranty information, technical support, or service inquiries, please contact TECNOSWITCH directly or refer to the warranty card included with your product. Keep your proof of purchase for warranty claims.