Sauter Marapi Electric Towel Dryer Radiator User Manual

1. Kupu Whakataki

Thank you for choosing the Sauter Marapi Electric Towel Dryer Radiator. This manual provides essential information for the safe installation, operation, and maintenance of your appliance. Please read these instructions carefully before use and retain them for future reference.

The Sauter Marapi is designed to provide comfortable heating and efficient towel drying, featuring a powerful blower, an intuitive LCD screen, and programmable settings for optimal energy management.

2. Nga Tohutohu Haumaru

Hiranga: Ki te kore e whai i ēnei tohutohu haumaru, ka pāngia pea koe e te ru hiko, te ahi, te whara rānei.

• This appliance is intended for domestic use only as a towel dryer and supplementary heater.
• Installation must be carried out by a qualified electrician in accordance with local wiring regulations and building codes, especially in bathrooms.
• Do not install the appliance directly below a socket outlet.
• Whakaritehia te voltage ōrite ana ki te tapanga whakatauranga i runga i te taputapu.
• Do not cover the radiator or blower vents, as this can cause overheating and fire.
• Keep children and pets away from the appliance when it is in operation, as surfaces can become hot.
• Kaua e rumakina te taputapu ki te wai, ki etahi atu wai ranei.
• Mena kua pakaru te taura tuku, me whakakapi e te kaihanga, tana kaihoko ratonga, etahi tangata whai tohu pera ranei kia kore ai e tupono.
• Ko tenei taputapu ehara i te mea mo te whakamahi ma te hunga (tae atu ki nga tamariki) he iti te kaha o te tinana, te tairongo, te hinengaro, te kore wheako me te mohiotanga, mena ka tukuna atu ki a raatau te tirotiro, te tohutohu ranei mo te whakamahi i te taputapu e te tangata whai mana mo to raatau haumaru.

3. Hua Neke Atuview

The Sauter Marapi combines a stylish design with practical functionality. Familiarize yourself with the main components:

• Huānga Whakawera: Horizontal round tubes for towel drying and radiant heat.
• Pupuhi: Located at the bottom, provides rapid heat for quick room warming.
• Paewhiri Mana LCD: Displays temperature, mode, and programming settings.
• Patene Mana: For adjusting settings and navigating menus.

Figure 3.1: Sauter Marapi Electric Towel Dryer Radiator in a bathroom setting. This image shows the radiator mounted on a wall next to a sink and mirror, highlighting its integration into a modern bathroom environment. The radiator features multiple horizontal bars for hanging towels and a control panel on the upper right side.

Whakaahua 3.2: Mua view of the Sauter Marapi Electric Towel Dryer Radiator. This image provides a clear, head-on view o te taputapu, showcasing its white finish, numerous round horizontal heating tubes, and the integrated LCD control panel on the right side. Three circular elements are visible at the top.

Whakaahua 3.3: Koki view of the Sauter Marapi Electric Towel Dryer Radiator. This perspective highlights the depth of the radiator and the design of its round heating tubes, which are suitable for hanging and drying towels. The LCD control panel is also visible on the side.

4. Tatūnga me te Tāuta

The Sauter Marapi radiator must be securely mounted to a wall and connected to the electrical supply. Due to the electrical nature and bathroom environment, professional installation is strongly recommended.

4.1 Whakapiki

• Choose a suitable wall location, ensuring adequate clearance from water sources (sinks, showers, bathtubs) as per local regulations (e.g., volume zones in bathrooms).
• Use the provided mounting bracket and hardware. Mark the drilling points accurately.
• Drill holes and insert appropriate wall plugs. Secure the mounting bracket firmly to the wall.
• Carefully lift the radiator and attach it to the mounting bracket. Ensure it is level and stable.

4.2 Hononga Hiko

• Whakatupato: Disconnect power at the main circuit breaker before attempting any electrical work.
• The appliance must be connected to a permanent electrical installation by a qualified electrician.
• Me whakarite te turanga tika.
• The electrical connection should be protected by a residual current device (RCD) if required by local regulations.

5. Nga Tohutohu Whakahaere

After proper installation and power connection, you can begin operating your Sauter Marapi radiator.

5.1 Hiko / Whakaweto

• Pehia te Mana pēhi i te pātene i runga i te papa whakahaere hei whakakā, hei whakaweto rānei i te taputapu.
• The LCD screen will illuminate when the unit is powered on.

5.2 Whakaaturanga LCD me nga Mana Whakahaere

The LCD screen displays current temperature, operating mode, and programming status. Use the navigation buttons (e.g., Aratau, +/-, Prog) to adjust settings.

5.3 Aratau Mahi

Your radiator typically offers several operating modes:

• Aratau Whakamarie: Maintains a set temperature for continuous comfort.
• Aratau Eco: Maintains a lower, energy-saving temperature.
• Aratau Parenga Hukapapa: Prevents the room temperature from dropping below a critical level (e.g., 7°C).
• Aratau Papatono: Follows a pre-set heating schedule.
• Blower Boost Mode: Activates the integrated blower for rapid heating for a set duration (e.g., 15-30 minutes).

Pehia te Aratau button to cycle through available modes. Use the +/- buttons to adjust the target temperature in Comfort or Eco modes.

5.4 Papatonotanga

The programmable feature allows you to set specific heating schedules for different times of the day and days of the week.

1. Pehia te Prog pātene ki te tomo aratau hōtaka.
2. Whakamahia te Aratau or arrow buttons to select the day and time segment you wish to program.
3. Whakamahia te +/- buttons to set the desired mode (Comfort, Eco, Off) for that segment.
4. Repeat for all desired time segments and days.
5. Perehi Prog again to exit and save the settings.

Refer to the detailed programming section in your full manual for advanced options and specific button functions.

6. Tiaki

Regular cleaning ensures optimal performance and extends the lifespan of your radiator.

• Te horoi: Before cleaning, ensure the appliance is switched off and disconnected from the power supply. Allow it to cool completely. Wipe the surfaces with a soft, damp kakahu. Kaua e whakamahi i nga kai horoi, nga whakarewa, nga matū kino ranei, na te mea ka pakaru te mutunga.
• Blower Filter (if applicable): Some models may have a removable filter for the blower. Check your specific model's instructions for cleaning or replacing this filter.
• Tirohanga Whānui: Periodically check the power cord and plug for any signs of damage. If damage is found, contact a qualified technician for repair.

7. Te Raru

If you encounter issues with your Sauter Marapi radiator, consult the following table before contacting customer support.

8. Whakatakotoranga

• Waitohu: Sauter
• Tauira: Marapi
• Tau tauira: 3410532201757
• Momo: Electric Towel Dryer Radiator with Blower
• Putanga Hiko: 1750 Watts
• Mana: LCD Screen, Programmable
• Taumaha: Tata ki te 27.25 kg
• ASIN: B07HGPKKJD

9. Pūtāhui me te Tautoko

For warranty information, please refer to the warranty card included with your product or visit the official Sauter webpae. Puritia to tohu hoko mo nga kereme whakamana.

If you require technical assistance, spare parts, or have questions not covered in this manual, please contact Sauter customer support. Contact details can typically be found on the manufacturer's webpae, i runga ranei i to putunga hua.

Sauter Official Webpae: www.sauter.fr (Manatokohia te rohe tika webpae hei tautoko.)