Global Fabric Task Chair 9326BK-JN01 User Manual

Nga Korero Haumaru Nui

For safe use, ensure the chair is fully assembled and all fastenings are secure. This chair has a maximum weight capacity of 250 lbs. and meets or exceeds ANSI/BIFMA standards. Always check the chair for stability before use.

• Kaua e neke ake i te kaha o te taumaha o te 250 lbs.
• Regularly inspect all bolts and screws for tightness. Retighten as necessary.
• Kaua e tu ki runga i te nohoanga.
• Use the chair only for its intended purpose as an office task chair.

Ka mutu te huaview

The Global Fabric Task Chair 9326BK-JN01 is designed for office environments, providing comfort and support. Key features include built-in lumbar support, an armless design for versatility, and a pneumatic seat-height adjustment system.

An image of the Global Fabric Task Chair, model 9326BK-JN01, in navy fabric. The image displays the overall dimensions: 17.5 inches to 22.5 inches in height, 25 inches in depth, and 22 inches in width at the base.

Āhuatanga:

• Navy fabric upholstery for durability and appearance.
• Built-in lumbar support to reduce back tension.
• Pneumatic seat-height adjustment for customizable seating positions.
• Armless design for easy movement and space-saving under desks.
• Twin-wheel carpet casters for mobility on various surfaces.
• Rated for up to 250 lbs. based on an 8-hour workday.

Setup / Assembly Instructions

Partial assembly is required for this task chair. The assembly process is designed to be straightforward and typically does not require specialized tools.

Nga Waahi Huinga:

1. Wewete Waenga: Kia ata tangohia nga waahanga katoa mai i te kete. Manatokohia kei reira nga waahanga katoa kua whakarārangihia ki te raarangi whakaemi.
2. Whakapirihia nga Kaata ki te turanga: Insert the twin-wheel carpet casters into the holes at the end of each leg of the chair base. Push firmly until they click into place.
3. Kōkuhu Hiki Hau: Whakanohoia te puoto hiki hau ki roto i te kohao waenga o te turanga tuuru kua huihuia.
4. Tāpirihia te Nohoanga ki te Hiki Hau: Carefully place the seat assembly onto the top of the gas lift cylinder. Ensure it is centered and fully seated.
5. Āpiti Tautokonga: Secure the backrest to the seat mechanism using the provided hardware. Ensure all screws are tightened securely.
6. Taki Whakamutunga: Before use, ensure all connections are secure and the chair is stable.

Nga Tohutohu Whakahaere

Whakaritenga teitei o te nohoanga pneumatic:

• Ki whakaarahia the seat: While seated, lift the adjustment lever located under the right side of the seat. The seat will rise. Release the lever at the desired height.
• Ki raro the seat: While seated, lift the adjustment lever. Apply slight body weight to the seat. The seat will lower. Release the lever at the desired height.

Chair Mobility:

The chair is equipped with twin-wheel carpet casters, allowing for easy movement across carpeted and hard floor surfaces. Ensure the path is clear of obstructions before moving the chair.

Te Tiaki me te Tiaki

• Karekau horoi: For general cleaning, spot clean the fabric with a mild detergent and a damp cloth. Avoid saturating the fabric. Test any cleaning solution on an inconspicuous area first.
• Tapare Tapare: Wipe the plastic and metal components with a soft, damp kakahu.
• Tirotiro auau: Periodically check all screws and bolts to ensure they remain tight. Retighten as needed to maintain stability and safety.
• Aukati i nga matū kino: Do not use abrasive cleaners, solvents, or strong chemical agents, as these can damage the chair's materials.

Raparongoā

• Chair is unstable: Ensure all assembly screws are fully tightened. Check that the gas lift is properly seated in the base and seat mechanism.
• Difficulty adjusting seat height: Verify that the adjustment lever is functioning correctly and not obstructed. Ensure the gas lift cylinder is not damaged.
• Haruru haruru: Apply a small amount of silicone-based lubricant to moving parts or connection points, particularly where the seat and backrest attach to the mechanism.
• Karekau e rere pai ana nga kaata: Check casters for accumulated debris (hair, lint) and clean as necessary. Ensure casters are fully inserted into the base.

Whakatakotoranga

Nga korero Whakaputanga

This Global Fabric Task Chair 9326BK-JN01 comes with a Rarangi Whakaiti mo te Ora. This warranty covers defects in materials and workmanship under normal use. For specific details regarding coverage, limitations, and how to make a warranty claim, please refer to the official Global warranty documentation or contact Global customer support.

Nga korero Whakapā

For further assistance, technical support, or warranty inquiries, please contact Global customer service:

• Webpae: www.globalfurnituregroup.com (Tena koa tirohia te rangatira webpae mo nga taipitopito whakapā o naianei.)
• Waea: Tirohia ki te kaihanga webpae mo nga tau whakapā a rohe.