ABLEGRID AC/DC Adapter PA-6 for Riva S Wireless Bluetooth Speaker User Manual

Kupu Whakataki

This manual provides essential instructions for the safe and effective use of your ABLEGRID AC/DC Adapter, Model PA-6. This adapter is designed to provide power to Riva S RS01B, RS01S, and RS01G Premium Wireless Bluetooth Speakers. Please read this manual thoroughly before use and retain it for future reference.

Nga korero haumaru

Hei whakarite i te mahi haumaru me te aukati i te kino, kia mau ki nga whakatupato e whai ake nei:

• Use only with compatible devices as specified (Riva S RS01B, RS01S, RS01G speakers).
• Kaua e whakaatuhia te urutau ki te wai, ki te makuku, ki ngā pāmahana tino kino rānei.
• A ape i te tuku, te tuku ranei i te urutau ki nga paanga kaha.
• Do not attempt to open or repair the adapter. Refer servicing to qualified personnel.
• Me whakarite te putanga hiko voltage matches the adapter's input voltage (100-240VAC).
• Disconnect the adapter from the power source when not in use for extended periods.
• Kaua e taea e nga tamariki.
• This product features OVP (Over Voltage Protection), OCP (Over Current Protection), and SCP (Short Circuit Protection) for enhanced safety.

Ka mutu te huaview

The ABLEGRID AC/DC Adapter (Model PA-6) is a power supply unit designed for specific Riva S wireless speakers. It converts AC wall power to the DC power required by your speaker.

Image 1: ABLEGRID AC/DC Adapter PA-6. This image shows the main adapter unit with its attached output cable and a separate AC input power cord.

Waehanga:

• Wāhanga Urutau: The main power conversion block (Model PA-6).
• Taura Putanga: Permanently attached cable with a connector for the speaker.
• Waea Hiko Whakauru AC: Detachable cord to connect the adapter unit to a wall outlet.

Tatūnga

1. Ensure your Riva S speaker (RS01B, RS01S, or RS01G) is powered off.
2. Connect the AC Input Power Cord to the adapter unit's input port.
3. Plug the other end of the AC Input Power Cord into a standard electrical wall outlet (100-240VAC, 50/60Hz).
4. Connect the output cable's connector from the adapter unit into the power input port on your Riva S speaker.
5. Manatoko he haumaru nga hononga katoa.

Image 2: ABLEGRID AC/DC Adapter PA-6 with both the AC input cord and DC output cable clearly visible, ready for connection.

Nga Tohutohu Whakahaere

Once the adapter is correctly connected to both the power outlet and your Riva S speaker, the speaker is ready to receive power. You can now power on your speaker as per its own instruction manual.

• The adapter provides continuous power to the speaker when plugged in.
• If your speaker has an internal battery, the adapter will charge the battery while simultaneously powering the speaker.
• Always ensure the adapter is placed in a well-ventilated area to prevent overheating.

Te tiaki

• Te horoi: Momotuhia te hononga mai i ngā pūtake hiko katoa i mua i te horoinga. Whakamahia he kakahu ngohengohe, maroke hei muru i te taha o waho. Kaua e whakamahi i ngā wai horoi, i ngā whakarewa rānei.
• Rokiroki: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture. Avoid tightly coiling the cables to prevent damage.
• Tirotiro: Periodically inspect the adapter and cables for any signs of damage, such as frayed wires, cracks, or bent pins. If damage is found, discontinue use immediately.

Raparongoā

No Power to Speaker:

• Ensure the AC input power cord is securely plugged into both the wall outlet and the adapter unit.
• Verify the adapter's output cable is firmly connected to the speaker's power input.
• Tirohia mehemea kei te mahi te putanga o te pakitara ma te hono atu ki tetahi atu taputapu.
• Inspect the adapter and cables for any visible damage. If damaged, discontinue use.

Whakawera Rawa:

• Ensure the adapter is in a well-ventilated area and not covered by cloths or other materials.
• Verify that the speaker is compatible with this adapter and not drawing excessive power.
• Ki te roa tonu te wera, momotu tonu atu, ka whakapā atu ki te ratonga tautoko.

Whakatakotoranga

Atahanga 3: Whakatata view of the ABLEGRID AC/DC Adapter PA-6 label, showing model number, input voltage, and safety certifications.

Pūtāhui me te Tautoko

For warranty information or technical support, please refer to the ABLEGRID official webpae, whakapā atu ranei ki to kaihoko. Puritia to riiki hoko hei tohu mo te hoko.