JETBeam HR30 960 Lumens Rechargeable Headlamp

1. Kupu Whakataki

The JETBeam HR30 is a high-performance rechargeable headlamp designed for various outdoor activities. It delivers up to 960 lumens of bright illumination and features a versatile 160-degree rotatable mechanism for precise light direction. Equipped with a Type-C fast charging port and compatible with 18650, 20700, or 2CR123A batteries, the HR30 ensures reliable power. Its durable anodized aluminum construction, removable bracket design, and tail magnet function enhance its utility and adaptability in diverse environments. This manual provides essential information for the safe and effective use of your headlamp.

Figure 1: JETBeam HR30 Rechargeable Headlamp, whakaatucasintōna hoahoa kiato me te whitiki whakarite.

2. He aha kei roto i te Pouaka

• JETBeam HR30 Rechargeable Headlamp (960 Lumens)
• 1 Hua pākahiko motuhake (kei roto)

3. Nga ahuatanga

• Tirohanga Teitei: Up to 960 lumens white light output.
• Versatile Power: Compatible with 18650, 20700, or 2CR123A batteries.
• USB Momo-C te utu: Fast and convenient recharging.
• Aratau Maama Whero: Available on both front and rear for preserving night vision or enhanced visibility.
• Koki Kurupae Whakaritea: 160-degree rotatable mechanism for directing light precisely.
• Hanga Roa: Made from anodized aluminum.
• Whakanoho pai: Lightweight design for extended wear.
• Ātete wai: IPX4 rated, suitable for rainy conditions.
• Removable Bracket: Ka taea e nga whiringa whakapuru ngawari.
• Tail Magnet Function: Provides hands-free attachment to metal surfaces.

4. Tatūnga

4.1. Tāuta Pūhiko

1. Open the battery compartment located at the rear of the headlamp.
2. Insert the provided 18650 battery (or a compatible 20700/2CR123A battery) according to the polarity indicators.
3. Katia kia mau te wahanga pākahiko.

4.2. Te Whakatikatika i te Parepare

Te paneamp features an adjustable headband for a secure and comfortable fit. Use the two loops on either side of the headlamp to tighten or loosen the strap until it fits snugly around your head without being too tight. The design ensures a balanced feel, minimizing bounce during activity.

5. Nga Tohutohu Whakahaere

5.1. Te Hiko / Whakaweto

• Hei huri i te upokoamp, press and hold the power button located on the top of the unit.
• Hei whakaweto i te upokoamp, press and hold the power button again.

5.2. Switching Light Modes

Once powered on, short press the power button to cycle through the available white light modes (e.g., high, medium, low, ultra-low). The HR30 also offers a dedicated red light mode for both front and rear lights.

• Ngā Aratau Mārama: 950 lumens, 400 lumens, 150 lumens, 50 lumens, 5 lumens, 1 lumen.
• Aratau Maama Whero: To activate the red light, typically a double-press or long-press from off or a specific sequence is required (refer to quick start guide for exact sequence if not specified).
• Marama Whero e Rarama ana: The rear red light can be set to a flashing mode for increased visibility, especially when running or cycling in traffic.

5.3. Adjusting Beam Angle

The front light module can be tilted up or down to adjust the beam angle. There are approximately four to five distinct angle levels, allowing you to direct the light straight ahead for distant viewing or downwards to illuminate your immediate path, which is particularly useful for trail running or detailed tasks.

5.4. Tohu Pūhiko

Te paneamp features a battery indicator (usually small LED lights) to show the remaining power level. Monitor this indicator to ensure you have sufficient charge for your activities.

6. Te utu

The JETBeam HR30 is equipped with a USB Type-C charging port for convenient and fast recharging. Locate the Type-C port, typically protected by a rubber cover, and connect it to a compatible USB power source using a Type-C cable (not always included). The battery indicator lights will typically show charging progress and full charge status.

7. Tiaki

• Te horoi: Horoia te paneamp me te ngawari, damp kakahu. Kaua e whakamahi i nga kai horoi me nga whakarewa.
• Tiaki Pūhiko: If storing for extended periods, remove the battery or ensure it is charged periodically to maintain battery health.
• Ātete wai: Ensure the USB port cover is securely closed to maintain the IPX4 water resistance rating.

8. Te Raru

• Tihiamp e kore e huri: Check if the battery is correctly installed and fully charged.
• Putanga marama atarua: He iti pea te pākahiko. Whakaorangia te upokoamp.
• Nga take utu: Ensure the USB Type-C cable and power adapter are functioning correctly. Check for any debris in the charging port.

9. Whakatakotoranga

10. Nga korero haumaru

WHAKATŪPATO: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Always handle with care and follow all safety guidelines.

11. Pūtāhui me te Tautoko

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official JETBeam webpae. Puritia to tohu hoko mo etahi kereme whakamana.