1. Kupu Whakataki
Thank you for choosing the Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
2. Nga Tohutohu Haumaru
- Haumaru Hiko: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Always disconnect power at the main circuit breaker before attempting any installation, maintenance, or bulb replacement.
- Whakamahi o waho: This fixture is rated IP44, meaning it is protected against solid objects larger than 1mm and against splashing water from any direction. It is designed for outdoor use only.
- Momo Puma: Use only R7s halogen bulbs with a maximum wattage o 150W. He nui ake te wat morahitage can cause overheating and damage to the fixture or create a fire hazard.
- Te whakahaere: Do not touch the halogen bulb with bare hands during installation or replacement, as oils from your skin can cause premature failure. Use a clean cloth or gloves.
- Whakapiki: Me whakarite kia pakari te hanganga o te mata whakairi, ā, ka taea e ia te tautoko i te taumaha o te taputapu.
3. Ihirangi mokete
Tena koa tirohia kei te noho katoa nga waahanga me te kore e pakaru:
- Brilliant Tanko 96162/06 Outdoor Wall Light Unit with Motion Sensor
- Ngā taputapu whakairi (ngā tīwiri, ngā mono pakitara)
- Pukapuka Tohutohu (tenei tuhinga)
Note: R7s bulb is typically not included and must be purchased separately.
4. Tatūnga me te Tāuta
I mua i to tiimata: Me mohio kua whakawetohia te tuku hiko ki te waahi whakaurunga i te wehenga ara iahiko matua.
- Whakapaia te Mata Maunga: Choose a suitable wall location for the fixture. Mark the drilling points for the mounting bracket.
- Maunga te Taiapa: Drill holes at the marked points and insert the wall plugs. Secure the mounting bracket to the wall using the provided screws.
- Waea waea: Connect the electrical supply wires to the terminal block inside the fixture. Ensure correct polarity (Live, Neutral, Earth) according to local wiring regulations. Secure all connections tightly.
- Tāutahia te Purama: Carefully insert an R7s halogen bulb (max 150W) into the bulb holder. Avoid touching the glass part of the bulb with bare hands.
- Whakapirihia te Whakapiri: Secure the main light unit to the mounted bracket. Ensure it is firmly attached and sealed against the wall to maintain its IP44 rating.
- Adjust Sensor and Light Head: The motion sensor and light head are adjustable. Position them to cover the desired detection area and illumination direction.
Figure 4.1: Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor. This image shows the complete fixture, including the main light housing and the adjustable motion sensor unit mounted below it.
Whakaahua 4.2: Whakatata view of the R7s bulb socket within the Brilliant Tanko fixture. This illustrates where the R7s halogen bulb should be inserted.
5. Nga Tohutohu Whakahaere
Once installed and power is restored, the Brilliant Tanko 96162/06 will operate as follows:
- Kitenga Nekehanga: The integrated motion sensor detects movement within its adjustable range. When motion is detected, the light will automatically turn on.
- Roa Maama: The light will remain on for a set period after motion is detected. This duration is typically adjustable via controls on the sensor unit (refer to specific markings on your sensor for adjustment dials for 'TIME' and 'LUX' settings, if present).
- Ambient Light Sensor (LUX): The sensor also includes an ambient light sensor. This prevents the light from activating during daylight hours, saving energy. The sensitivity of this sensor can often be adjusted to determine at what level of darkness the motion sensor becomes active.
6. Tiaki
- Te horoi: Hei horoi i te taputapu, whakarite kia weto te hiko. Horoia ki te ngohengohe, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or sensor.
- Whakakapi Purama: Always disconnect power before replacing the bulb. Allow the old bulb to cool completely. Carefully remove the old R7s bulb and insert a new R7s bulb (max 150W), avoiding direct contact with the glass.
- Tirotiro: Tirotirohia i ia wa te taputapu mo nga tohu o te pakaru, nga hononga wetewete, te kakahu ranei. Mena ka kitea etahi take, momotuhia te hiko ka korero ki tetahi tohunga hiko.
7. Te Raru
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore e marama te rama. | No power supply. Blown bulb. Faulty wiring. Ambient light too high. | Check circuit breaker. Replace bulb. Verify wiring connections (consult electrician). Adjust LUX setting on sensor. |
| Ka mau tonu te rama. | Continuous motion detected. Sensor faulty. Wiring error. | Adjust sensor angle/sensitivity. Check for obstructions. Consult electrician. |
| Ka kā noa te rama. | Sensor too sensitive. Environmental factors (wind, animals). | Reduce sensor sensitivity. Re-position sensor to avoid unwanted triggers. |
| Ka whiti marama. | Loose bulb. Incorrect bulb type. Power fluctuations. | Ensure bulb is seated correctly. Verify R7s 150W bulb. Consult electrician for power issues. |
8. Whakatakotoranga
| Āhuahira | Taipitopito |
|---|---|
| Waitohu | He kanapa |
| Tau tauira | 96162/06 |
| Rahi Hua (L x W x H) | 14 x 21 x 22 cm |
| Taumaha Tūemi | 521 karamu |
| Whakatauranga IP | IP44 |
| Kāhua | Hou |
| Tae | Pango |
| Rauemi | Metara, Karaehe |
| Te maha o nga Topuku | 1 |
| Voltage | 230 Volts |
| Whakamahinga Tauwhāiti | Te whakamahi o waho anake |
| Nga waahanga motuhake | Adjustable (sensor/light head) |
| Momo Potae | R7 |
| Max Wattage | 150W |
| Puna Mana | Electrical Cable (Wired) |
| Momo Tāuta | Whakapiki taiepa |
| Tapanga Energy | A+ to E (for compatible bulbs) |
Figure 8.1: Energy label for the Brilliant Tanko 96162/06, indicating compatibility with bulbs from energy classes A++ to E.
9. Pūtāhui me te Tautoko
Information regarding specific warranty terms and spare parts availability for the Brilliant Tanko 96162/06 is not provided in the product data. For warranty claims, technical support, or inquiries about spare parts, please contact the retailer where you purchased the product or the manufacturer directly. Always have your proof of purchase and model number (96162/06) available when contacting support.