ECOXGEAR EcoDrift Wireless Bluetooth Speaker User Manual

1. Kupu Whakataki

Thank you for choosing the ECOXGEAR EcoDrift Wireless Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. The EcoDrift is designed for rugged outdoor use, featuring 100% waterproof capabilities, Bluetooth connectivity, and integrated voice control for Siri and Google Assistant.

Ko nga ahuatanga matua ko:

• Bluetooth 4.2 for streaming music up to 100 feet.
• 100% waterproof, acoustically engineered enclosure for deep bass and clear vocals.
• Tae atu ki te 10 hāora o te wā tākaro i runga i te utunga kotahi.
• EcoConnect feature to pair two ECOXGEAR speakers for enhanced sound.
• EcoTalk button for direct access to Siri or Google voice assistants.

2. Nga korero haumaru

Tena panuihia me te mohio ki nga tohutohu haumaru katoa i mua i te whakamahi i tenei hua. Ki te kore e whai i enei tohutohu ka whara, ka kino ranei te taputapu.

• Do not attempt to open or disassemble the EcoDrift speaker. This may void the warranty and cause damage.
• Ensure the charging port cover is securely closed when the speaker is exposed to water to maintain its waterproof integrity.
• Avoid exposing the speaker to extreme temperatures (hot or cold) for prolonged periods.
• Whakamahia anake te taura USB kua whakaratohia mo te utu.
• Kia matara atu te kaikorero i nga mura ahi, i nga puna wera ranei.
• Horoia te kaikorero ki te ngohe, damp kakahu. Kaua e whakamahi i nga matū kino me nga horoi horoi.

3. Ihirangi mokete

Verify that all items are present in your EcoDrift package:

• ECOXGEAR EcoDrift Speaker
• Tauira Whakatau USB
• Aratohu Kaiwhakamahi (tenei tuhinga)

4. Tatūnga

4.1 Charging the EcoDrift

Before first use, fully charge your EcoDrift speaker. The charging port is located under a protective cover on the side of the speaker.

1. Whakatuwheratia te uhi whakamarumaru ki te taha o te kaikōrero.
2. Connect the small end of the USB charging cable to the speaker's charging port.
3. Honoa te pito nui o te taura utu USB ki tētahi pūtake hiko USB (hei tauira, te tauranga USB rorohiko, te urutau pakitara USB).
4. The charging indicator light will illuminate. Once fully charged, the light will change or turn off (refer to LED indicator section for specifics).
5. After charging, securely close the protective cover to maintain waterproof integrity.

4.2 Kei te Hiko / Weto

To power on or off the EcoDrift speaker:

• Whakahiko: Patohia me te pupuri i te paatene Hiko (⏻) for approximately 2-3 seconds until you hear an audible confirmation and the LED indicators light up.
• Weto Whakakore: Patohia me te pupuri i te paatene Hiko (⏻) for approximately 2-3 seconds until you hear an audible confirmation and the LED indicators turn off.

4.3 Takirua Nihokikorangi

Pair your EcoDrift speaker with your Bluetooth-enabled device (smartphone, tablet, laptop) to stream audio.

1. Ensure the EcoDrift speaker is powered on. It will automatically enter Bluetooth pairing mode if not already connected, indicated by a flashing blue LED.
2. I runga i to taputapu, whakahohea te Nihokikorangi me te rapu mo nga taputapu e waatea ana.
3. Select "ECOXGEAR EcoDrift" from the list of found devices.
4. Once paired, the blue LED on the speaker will become solid, and you will hear an audible confirmation.

4.4 EcoConnect Pairing (Pairing Two EcoDrift Speakers)

The EcoConnect feature allows you to wirelessly connect two EcoDrift speakers for a larger, synchronized sound experience (stereo or mono mode).

Image: Two EcoDrift speakers demonstrating the EcoConnect feature for synchronized audio playback.

1. Ensure both EcoDrift speakers are powered on and not connected to any Bluetooth device. If a speaker is connected, disconnect it.
2. On the first speaker (which will be the primary speaker), press the EcoConnect button (⟳). The LED will flash.
3. On the second speaker, press the EcoConnect button (⟳).
4. The speakers will attempt to connect to each other. Once connected, you will hear an audible confirmation, and the EcoConnect LEDs on both speakers will become solid.
5. Now, pair your Bluetooth device to the primary EcoDrift speaker (the first one you pressed the EcoConnect button on). Audio will play through both connected speakers.

5. Operating the EcoDrift

Whakaahua: Runga view of the EcoDrift speaker, highlighting the control panel.

5.1 Paewhiri Mana Ki rungaview

Whakaahua: Taipitopito view of the EcoDrift control panel with button functions.

5.2 Whakahoki Ororongo

Once paired via Bluetooth, you can control audio playback directly from the EcoDrift speaker or your connected device.

• Whakamahia te Purei/Tatari button to start or stop music.
• Whakamahia te Rōrahi Whakarunga (+) a Raro Whakararo (-) ngā pātene hei whakarite i te oro o te kaikorero.
• Whakamahia te Next Track (≫) a Previous Track (≪) buttons to navigate through your playlist.

5.3 Ngā Mahi a te Pūorooro

The EcoDrift can be used as a speakerphone for hands-free calls.

• Whakautu Waea: Pehia te Purei/Tatari button once when a call comes in.
• Whakamutu Waea: Pehia te Purei/Tatari pātene kotahi i te wā e waea ana.
• Whakakore Waea: Patohia me te pupuri i te Purei/Tatari button for 2 seconds when a call comes in.

5.4 Using EcoTalk (Voice Assistant)

The EcoTalk button provides quick access to your smartphone's voice assistant (Siri or Google Assistant).

Image: EcoDrift speaker highlighting the EcoTalk button for voice assistant activation.

• Ensure your EcoDrift is connected to your smartphone via Bluetooth.
• Pehia te EcoTalk button (⌂). Your phone's voice assistant will activate, and you can speak your command through the speaker's microphone.

5.5 Waterproof Usage

The EcoDrift is 100% waterproof and designed to float. It has an IP67 rating, meaning it is protected from dust and can withstand immersion in water up to 1 meter for 30 minutes.

Image: EcoDrift speaker demonstrating its IP67 waterproof capability.

• Always ensure the charging port cover is completely sealed before exposing the speaker to water.
• If the speaker gets wet, wipe it dry with a soft cloth before opening the charging port for charging.

6. Tiaki

6.1 Te horoi

To keep your EcoDrift speaker in optimal condition:

• Horoia te waho ki te ngohengohe, damp kakahu.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the speaker's finish or waterproof seals.
• If exposed to saltwater, rinse the speaker with fresh water and dry thoroughly.

6.2 Rokiroki

Ki te kore e whakamahia mo te wa roa:

• Store the speaker in a cool, dry place.
• Āta karohia te penapena ki te rā tika, ki ngā wāhi rānei e tino pāmahana ana.
• For optimal battery life, charge the speaker to about 50% before long-term storage.

6.3 Tiaki Pūhiko

The EcoDrift uses a built-in rechargeable Lithium Ion battery.

• A ape i te tino tuku i te pākahiko i nga wa katoa.
• Me utu te pākahiko i nga wa katoa, ahakoa kaore i te whakamahia i nga wa katoa.
• Kaua e tukuna te papahiko ki te wera nui.

7. Te Raru

If you encounter issues with your EcoDrift speaker, refer to the following common problems and solutions:

8. Whakatakotoranga

Detailed technical specifications for the ECOXGEAR EcoDrift speaker:

9. Nga Korero Whakaputanga

ECOXGEAR products are designed and manufactured to the highest quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ECOXGEAR webpae. Puritia to tohu hoko mo nga kereme whakamana.

10. Tautoko Kiritaki

For further assistance, technical support, or inquiries regarding your ECOXGEAR EcoDrift speaker, please visit the ECOXGEAR support section on their official website or contact their customer service department. Contact information can typically be found on the product packaging or the brand's webpae.