1. Kupu Whakataki
This manual provides detailed instructions for the installation, operation, and maintenance of your AIBOO Linkable Under Cabinet LED Lighting Kit. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Ihirangi mokete
Manatokohia ko nga waahanga katoa kei raro nei kei roto i to kete:
- 10 x 12V LED Under Cabinet Puck Lights
- 1 x LED Hardwired Transformer with Wall Plug (AC120 to DC12V)
- 1 x Distributor (6-way splitter)
- 1 x Wireless RF Remote Controller (including a receiver and a remote)
- 4 x Extension Cables (5ft each)
- 10 x Double-Sided Adhesive Stickers
- 20 x Tiuri
3. Whakatakotoranga
| Āhuahira | Whakatakotoranga |
|---|---|
| Waitohu | AIBOO |
| Tau tauira | YK-300000197 |
| Tae Maama | Mahana Ma |
| Te Paemahana Tae | 2700 Kelvin |
| Rerewharewha | 1000 Lumen (Total for 10 lights) |
| Wattage | 20.00 Watts (Total for 10 lights) |
| Voltage | 12 Volts |
| Puck Light Dimensions (L x W x H) | 2.36 x 2.36 x 0.31 inihi (6 x 6 x 0.8 cm) |
| Puna Mana | Corded Electric (Hardwired or Wall Plug-in) |
| Tikanga Mana | Mana Mamao RF Ahokore |
| Nga waahanga motuhake | Dimmable, Linkable (Series Connection) |
| Mahinga o roto/waho | Roo-roto |
| Taumata Atete Wai | Ehara i te wai ātete |
| Ngā Pūhiko e Hiahiatia ana (mō te mamao) | 1 pākahiko CR2 (kei roto) |
4. Tatūnga me te Tāuta
The AIBOO Linkable Under Cabinet LED Lighting Kit offers two installation methods: hardwired or wall plug-in. Choose the method that best suits your needs.
4.1. Nga Waahi Whakataunga Whanui
- Tahora Mahere: Determine the desired placement for each puck light under your cabinets or shelves. Ensure the cables can reach the distributor and power source.
- Nga Rarama Puck Maunga:
- Tikanga Piripiri: Clean the mounting surface thoroughly. Peel the backing from the double-sided adhesive sticker and firmly press it onto the back of the puck light. Then, press the light onto the desired surface.
- Tikanga Tīwiri: Use the provided screws to secure the puck lights to the desired surface. Ensure the screws are tightened securely but do not overtighten.
- Connect Lights to Distributor: Connect the cables from each puck light to the 6-way distributor. Use the 5ft extension cables as needed to bridge longer distances between lights or to the distributor. The linkable design allows for simple wiring management.
- Connect Distributor to Receiver: Plug the distributor into the wireless RF remote receiver.
- Connect Receiver to Power Adapter: Plug the receiver into the 12V LED hardwired transformer/wall plug-in adapter.
- Hononga Hiko:
- Wall Plug-in: Plug the power adapter into a standard AC120V wall outlet.
- Maamaa: For hardwired installations, consult a qualified electrician. Ensure power is disconnected before attempting any hardwiring.
5. Nga Tohutohu Whakahaere
The lighting kit is controlled by a wireless RF remote control, allowing for convenient operation.
5.1. Nga Mahi Whakamao Mamao
- KIA/WATA: Press the "ON" button to turn the lights on, and "OFF" to turn them off.
- Whakaritenga Tirohanga:
- "LIGHT +" / "BRIGHT +": Increases brightness.
- "LIGHT -" / "BRIGHT -": Decreases brightness.
- Preset levels: Buttons for 100%, 50%, and 25% brightness.
- Takirua: If the remote does not control the lights, press "Pair" or "Decode" until the lights flicker. This indicates successful pairing.
- Timing Settings: Buttons for 1H, 2H, 4H, and 8H allow you to set an automatic shut-off timer for 1, 2, 4, or 8 hours respectively.
6. Tiaki
To ensure the longevity and optimal performance of your AIBOO LED lighting kit, follow these maintenance guidelines:
- Te horoi: Disconnect power before cleaning. Use a soft, dry cloth to gently wipe the puck lights and other components. Avoid abrasive cleaners, solvents, or excessive moisture, as these can damage the product.
- Whakaha Uepu: Periodically check all cable connections to ensure they are secure. Avoid placing heavy objects on cables or bending them sharply, which can cause damage.
- Pūhiko Mamao: If the remote control's range or responsiveness decreases, replace the CR2 battery. Refer to the remote's battery compartment for instructions on replacement.
- Nga Tikanga Taiao: He mea hanga tēnei hua mō te whakamahi i roto i te whare anake. Āraia te pānga ki te wai, te haumākū nui, te pāmahana tino kino rānei.
7. Te Raru
If you encounter issues with your AIBOO LED lighting kit, refer to the following common troubleshooting steps:
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kaore nga rama e ka ana. |
|
|
| Ko nga rama ka kapohia, ka pouri ohorere ranei. |
|
|
| Ko te mana mamao kaore e aro. |
|
|
8. Nga Korero Whakaputanga
AIBOO products are typically covered by a manufacturer's warranty. For specific details regarding the warranty period and terms for your YK-300000197 lighting kit, please refer to the documentation included with your purchase or contact AIBOO customer support directly. Keep your purchase receipt as proof of purchase.
9. Tautoko Kiritaki
For further assistance, technical support, or inquiries regarding your AIBOO Linkable Under Cabinet LED Lighting Kit, please contact AIBOO customer service. Contact information can usually be found on the product packaging or the official AIBOO webpae.
The seller for this product is AIBOO Lighting. For support, you may visit their store page on Amazon or contact them through the Amazon platform.
