Braun K600, K650, K700, K750, 3200, 3202, 3205, FX3020, FX3030, FP3010, FP3020, PJ600

Braun Citrus Juicer Cone Instruction Manual

For Combimax and Multiquick Food Processors

1. Hua Neke Atuview

This manual provides instructions for the proper use and maintenance of your Braun Citrus Juicer Cone, an essential accessory designed to expand the functionality of your compatible Braun food processor.

Braun Citrus Juicer Cone

Figure 1: The Braun Citrus Juicer Cone. This white, conical accessory features vertical ridges and a wide base, designed to extract juice from citrus fruits when attached to a compatible Braun food processor.

The citrus juicer cone is specifically engineered to fit into the designated juicer attachment of your food processor, allowing for efficient and mess-free juicing of oranges, lemons, limes, and grapefruits.

2. Hototahi

This Braun Citrus Juicer Cone is compatible with the following Braun food processor models and attachments:

  • Braun Combimax and Multiquick Food Processors
  • Specifically designed for use with the PJ600 citrus juicer attachment.
  • Hototahi ki nga tauira: K600, K650, K700, K750, 3200 (PJ600), 3202 (FX3020, FX3030), 3205 (FP3010, FP3020).

Note: This cone must be used in conjunction with the special strainer designed to be inserted inside the food processor bowl for proper operation. Refer to your food processor's main manual for details on the PJ600 attachment.

3. Tatūnga

  1. Whakaritea te Haumaru: Before assembly, ensure your food processor is unplugged from the power outlet.
  2. Whakaritea te Tukatuka Kai: Place the food processor bowl onto the motor unit.
  3. Whakauruhia te Tātari: Carefully place the special citrus juicer strainer (not included with this cone, typically part of the PJ600 attachment) into the food processor bowl. Ensure it is seated correctly.
  4. Attach Cone: Position the Braun Citrus Juicer Cone onto the central spindle of the strainer. Gently push down and twist slightly until it is securely in place. It should fit snugly and not wobble.
  5. Upi Haumaru: Place the food processor lid onto the bowl and lock it into position according to your food processor's instructions.
  6. Hono Hono: Once fully assembled, you may plug in your food processor.

4. Nga Tohutohu Whakahaere

Follow these steps to effectively juice citrus fruits:

  1. Whakaritea Hua: Tapatapahia ngā hua citrus (karaka, rēmana, raima, karepe) kia rua.
  2. Turanga Hua: With the food processor turned off, place one half of a citrus fruit, cut-side down, onto the juicer cone.
  3. Tīmata te Wai Wai: Turn on your food processor to the recommended speed setting for juicing (refer to your food processor's manual).
  4. Hoatu Pēhanga: Gently press the fruit down onto the rotating cone. The cone's ridges will extract the juice, which will flow through the strainer into the bowl below, separating pulp and seeds.
  5. Haere tonu te Whakatō Wai: Continue until all desired fruit halves are juiced.
  6. Whakaweto: Once finished, turn off the food processor and unplug it before disassembling.

Tip: For maximum juice extraction, apply steady, even pressure. Avoid excessive force, as this can strain the motor or damage the cone.

5. Tiaki me te Whakapai

Regular cleaning ensures the longevity and hygienic use of your citrus juicer cone.

  • Horoi tonu: After each use, disassemble the cone and strainer from the food processor.
  • Horoi: Rinse the cone and strainer under warm running water to remove any pulp or residue.
  • Horoi: Wash the cone and strainer with mild dish soap and a soft brush if necessary to remove stubborn pulp.
  • Haumaru te horoi rihi: The Braun Citrus Juicer Cone is typically dishwasher safe (top rack recommended). Refer to your food processor's manual for specific dishwasher instructions for the strainer and bowl.
  • whakamaroke: Tukua kia maroke nga wahanga katoa i mua i te whakahiato, te penapena ranei.
  • Rokiroki: Store the cone in a clean, dry place, preferably with your food processor accessories.

Caution: Do not use abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the plastic surface of the cone.

6. Te Raru

RaruraruTake peaRongoā
Cone does not fit or is loose.Incorrect model of food processor or strainer. Cone not properly aligned.Verify your food processor model against the compatibility list. Ensure the strainer is correctly seated in the bowl and the cone is aligned with the spindle before pushing down.
Poor juice extraction.Insufficient pressure. Fruit not cut properly. Food processor speed too low.Apply gentle, consistent pressure. Ensure fruit halves are cut cleanly. Check your food processor manual for the optimal juicing speed.
He kakano ranei i roto i te waiu.Strainer not installed or damaged.Ensure the special citrus juicer strainer is correctly installed beneath the cone. If the strainer is damaged, it may need replacement.

7. Whakatakotoranga

  • Waitohu: Braun
  • Momo Hua: Citrus Juicer Cone (Accessory)
  • Tae: White (as per description)
  • Rauemi: Plastic (as per description)
  • Ahu (L x W x H): Tata ki te 11 x 11 x 13 cm (4.3 x 4.3 x 5.1 inihi)
  • Taumaha: Tata ki te 100 karamu (0.22 lbs)
  • Tauira Hototahi: Braun Combimax and Multiquick Food Processors (K600, K650, K700, K750, 3200, 3202, 3205 series)

8. Pūtāhui me te Tautoko

This product is an accessory for Braun food processors. For specific warranty information regarding this accessory, please refer to the warranty documentation provided with your original Braun food processor or contact Braun customer support directly.

If you encounter any issues or have questions not covered in this manual, please contact Braun customer service or the retailer from whom you purchased the product. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official Braun website or consult your food processor's main instruction manual.

© 2023 Braun. Pūmau te mana.

Ko tenei pukapuka mo nga kaupapa korero anake. Ko nga whakaritenga o nga hua ka huri noa me te kore panui.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.