Pukapuka Kaiwhakamahi mō te Kāmera Papaaho Blackbox HD DVR

1. Kupu Whakataki

Thank you for choosing the START Blackbox HD DVR Dashcam. This manual provides detailed instructions on how to set up, operate, and maintain your dashcam to ensure optimal performance and longevity. Please read this manual carefully before using the device and keep it for future reference.

2. Hua Neke Atuview

2.1 Nga waahanga matua

• Full HD 1920 x 1080 Recording: Ka hopu i te ataata marama me te kiko o te footage.
• Arotahi Koki-Whanui 170°: Ka whakarato i te whānui view of the road, minimizing blind spots.
• Matakitenga Ake Po: Ensures clear recordings even in low-light conditions.
• Roopu Hopu: Ka tuhirua aunoa i te foo tawhito rawatage when the memory card is full, ensuring continuous recording.
• Kitenga Nekehanga: Automatically starts recording when motion is detected near the vehicle, providing security when parked.
• Tāutatanga ngawari: Secure suction cup mount for quick setup on the windshield.
• Kōwhiringa Hiko Hangarau: Can be powered via USB cable or car cigarette lighter adapter.

2.2 Ihirangi mokete

Tena koa tirohia te pouaka mo nga mea e whai ake nei:

• START Blackbox HD DVR Dashcam
• Maunga Hara Suction
• Tauira USB
• Car Cigarette Lighter Adapter

Image: All components included in the package: dashcam, suction cup mount, USB cable, and car charger.

2.3 Hoahoa Hua

Whakaahua: Mua view of the dashcam with its lens and suction cup mount.

Whakaahua: Rear view of the dashcam, displaying the screen and control buttons.

3. Tatūnga

3.1 Whakaeke i te Papatohu

1. Clean the area on your windshield where you intend to mount the dashcam. Ensure it is free of dust and grease.
2. Āpitihia te maunga kapu momi ki te kāmera papaaho.
3. Pēhia te kapu momi ki te matapihi o mua, ka huri i te rīpene kia mau ai ki tōna tūranga.
4. Adjust the angle of the dashcam to ensure a clear view o te huarahi kei mua.

Image: The dashcam securely mounted on a car windshield, ready for use.

3.2 Te Whakauru i tētahi Kāri MicroSD

A MicroSD card (not included) is required for recording. The dashcam supports cards up to a certain capacity (refer to specifications).

1. Locate the MicroSD card slot on the side or bottom of the dashcam.
2. Insert the MicroSD card with the gold contacts facing the back of the dashcam until it clicks into place.
3. Hei tango, peia ata te kaari kia puta ra ano.

3.3 Whakamana i te Pūrere

1. Connect the car charger to the dashcam's power input port.
2. Monohia tetahi pito o te rihi hiko waka ki te putanga rama hikareti o tō waka.
3. The dashcam will typically power on automatically when the vehicle's ignition is turned on.
4. Hei whakakā/whakaweto ā-ringa, pēhia me te pupuri i te pātene mana.

4. Nga Tohutohu Whakahaere

4.1 Mahi Taketake

• Hopu Aunoa: Once powered on and a MicroSD card is inserted, the dashcam will automatically begin recording.
• Te tuhi ā-ringa: Press the Record button to start or stop recording manually.
• Aratau Whakaahua: Switch to photo mode to capture still images.
• Aratau Whakahoki: Access playback mode to review recorded videos and photos on the dashcam's screen.

4.2 Aratau Tuhituhi

• Roopu Hopu: Videos are recorded in segments (e.g., 1, 3, or 5 minutes). When the memory card is full, the oldest unlocked file ka tuhiruatia.
• Kitenga Nekehanga: When enabled, the dashcam will automatically start recording if it detects movement in front of the lens while the vehicle is parked. This feature requires continuous power supply.
• Matakitenga po: The dashcam automatically adjusts its settings to capture clearer video in low-light conditions, enhancing visibility during night driving.

4.3 Whakatere Tahua

Hei uru me te whakatika i nga tautuhinga:

1. Pehia te Tahua button to enter the settings interface.
2. Whakamahia te Runga/Raro navigation buttons to scroll through options.
3. Pehia te OK pātene hei whakaū i tētahi kōwhiringa.
4. Pehia te Tahua button again to exit the settings.

5. Tiaki

5.1 Te horoi i te taputapu

• Use a soft, dry cloth to clean the dashcam body.
• For the lens, use a lens cleaning cloth and specialized lens cleaning solution to avoid scratches.
• Kaua e whakamahi i nga kai horoi me nga whakarewa.

5.2 Whakahaere Kāri MicroSD

• It is recommended to format the MicroSD card regularly (e.g., once a month) to maintain optimal recording performance and prevent data corruption.
• Format the card directly through the dashcam's menu settings.
• Replace the MicroSD card if you experience frequent recording errors or data loss.

6. Te Raru

If you encounter issues with your dashcam, please refer to the following table for common problems and their solutions:

7. Whakatakotoranga

8. Pūtāhui me te Tautoko

Mō ngā mōhiohio pūtāhui me te tautoko hangarau, tirohia ngā tuhinga i whakaratohia me tō hoko, whakapā atu rānei ki te kaihokohoko. Puritia tō taunakitanga hoko mō ngā kereme pūtāhui katoa.