Fluance RT81
Pukapuka Kaiwhakamahi mō te Pūoro Rekoata Fluance RT81 Elite High Fidelity Vinyl Turntable
Tauira: RT81 | Waitohu: Fluance
Kupu Whakataki
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Fluance RT81 Elite High Fidelity Vinyl Turntable. Please read this manual thoroughly before using your turntable to ensure proper function and longevity.
The Fluance RT81 is designed to deliver a pure analog listening experience with premium components, including an Audio Technica AT95E cartridge, a belt-drive system, and a high-mass MDF wood plinth for superior vibration isolation.
He aha kei roto
Manatokona kei roto nga waahanga katoa i roto i te kete:
- Wāhanga Ripanga Hurihuri RT81
- Uwhi Puehu
- 45 Whāurutau
- Whariki Riri Rapa
- 3ft RCA Cable with Ground Wire
- 100V - 240V (50/60Hz) AC Power Adapter
- Aratohu Timata Tere
- Audio Technica AT95E Cartridge (pre-installed on headshell)
- Taumaha
- Hinges (x2)
- Herepete Kariki
Image: All components included with the Fluance RT81 turntable, including the plinth, aluminum platter, platter mat, headshell & AT95E cartridge, dust cover, hinges, RCA cable, 45 adapter, counterweight, 5ft power adapter, and rubber belt.
Tatūnga
1. Te Wetewete me te Whakanoho
Tangohia marietia ngā wāhanga katoa mai i te takai. Whakatakotoria te tēpu hurihuri ki runga i tētahi mata pumau, papatahi, kia matara atu i te rā tika, i ngā pūtake wera, me te wiri nui.
Image: The Fluance RT81 turntable in its walnut finish, with the clear dust cover open, showcasing the platter and tonearm.
2. Te Riri me te Whitiki te whakauru
- Place the aluminum platter onto the spindle.
- Carefully loop the rubber belt around the motor pulley and the inner rim of the platter. Ensure the belt is not twisted.
- Place the rubber platter mat on top of the aluminum platter.
Whakaahua: He tata view of the Fluance RT81 turntable's tonearm, highlighting the Audio Technica AT95E cartridge with its green stylus.
3. Tatūnga Tonearm
The Audio Technica AT95E cartridge is pre-installed on the headshell. You will need to balance the tonearm and set the tracking force.
- Āpitihia te taumaha taurite ki te tuara o te ringaringa.
- Adjust the counterweight until the tonearm is balanced and floats horizontally.
- Set the tracking force to the recommended 2.0 grams by rotating the counterweight.
- Set the anti-skating control to '2' to match the tracking force.
4. Connecting to Audio System
The RT81 features a built-in Texas Instruments preamp, offering flexibility in connection options.
- Using Built-in Preamp: Set the PHONO/LINE switch on the back of the turntable to RINA. Connect the RCA cables from the turntable's AUDIO OUTPUT to any available line-level input (e.g., AUX, CD) on your amplifier or powered speakers. The ground wire is not needed in this configuration.
- Using External Preamp: Set the PHONO/LINE switch on the back of the turntable to WAea. Connect the RCA cables from the turntable's AUDIO OUTPUT to the PHONO input on your external preamp or receiver. Connect the ground wire from the turntable's ground post to the ground terminal on your external preamp/ kaiwhiwhi.
Image: Rear panel of the Fluance RT81 turntable, displaying the RCA audio output jacks, ground terminal, PHONO/LINE switch, AUTO STOP switch, and DC 12V power input.
5. Hononga Mana
Connect the AC power adapter to the DC 12V input on the back of the turntable, then plug it into a wall outlet.
Nga Tohutohu Whakahaere
1. Te purei Rekoata
- Place a record on the platter mat. For 7-inch singles, use the included 45 adapter.
- Select the appropriate speed (33 or 45 RPM) using the selector dial on the front left.
- Hikitia te tonearm ma te whakamahi i te tohu tohu.
- Whakanohoia ā-ringa te ringaringa oro ki runga ake i te riu tīmatanga e hiahiatia ana o te rekoata.
- Lower the tonearm slowly using the cueing lever. The record will begin to play.
2. Auto Stop Function
The RT81 features an auto-stop function. When enabled (AUTO STOP switch set to ON), the platter will automatically stop spinning once the tonearm reaches the end of the record. If disabled (AUTO STOP switch set to OFF), the platter will continue to spin until manually stopped.
Video: A demonstration of the Fluance RT81 turntable in operation, showcasing the automatic stop feature at the end of a record. This video is provided by Shoptronics, a seller of the product.
3. Whakamutua te purei
- Hikitia te tonearm ma te whakamahi i te tohu tohu.
- Whakahokia te tonearm ki tona okiokinga.
- Turn the speed selector dial to "OFF" to stop the platter.
Te tiaki
1. Te horoi i te Ripanga Takahuri
Regular cleaning will help maintain the performance and appearance of your RT81.
- Use a soft, dry cloth to wipe the plinth and dust cover. Avoid abrasive cleaners.
- Gently brush the stylus with a soft brush in a back-to-front motion to remove dust.
- Clean records regularly with a carbon fiber brush or record cleaning solution to prevent dust buildup and improve sound quality.
2. Belt Replacement
The drive belt may need replacement over time due to wear. Refer to the "What's Included" section for the location of the belt and instructions for re-installation.
Raparongoā
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Kore Oro | He he te tautuhinga whakawhiti PHONO/LINE; nga hononga RCA wewete; ampnga take riipene/kaikorero. | Ensure PHONO/LINE switch is set correctly (LINE for built-in preamp, PHONO for external). Check all cable connections. Verify ampKa whakahikohia nga kaikorero / kaikorero ka tuu ki te whakaurunga tika. |
| Oro Kopikopiko | Incorrect tracking force; dirty stylus; damaged record. | Re-balance tonearm and set tracking force to 2.0g. Clean the stylus. Inspect record for damage. |
| Platter Not Spinning | Power not connected; belt dislodged; AUTO STOP engaged and tonearm not moved. | Check power connection. Re-seat the drive belt. Move tonearm over platter or disable AUTO STOP. |
| Haruru Haruru | Ground wire not connected (if using external preamp); interference. | Ensure ground wire is securely connected (if PHONO mode). Move turntable away from other electronic devices. |
Whakatakotoranga
- Tauira: RT81 Elite
- Waitohu: Rererenga
- Ahu (L x W x H): 13.75 x 16.5 x 5.5 inihi
- Taumaha Tūemi: 14.1 pauna
- Plinth Material: MDF Rakau
- Pereti: Konumohe
- Kaata: Audio Technica AT95E (Elliptical Stylus)
- Pūnaha Puku: He Peara Tere
- Nga tere: 33 1/3, 45 RPM
- Preamp: Built-in Texas Instruments Preamp (switchable PHONO/LINE)
- Hononga: Wired RCA Output with Ground Terminal
- Kati Aunoa: Yes (switchable ON/OFF)
- Tae: Walnut
Atahanga: Overhead view of the Fluance RT81 turntable with a record spinning, demonstrating its operational state.
Pūtāhui me te Tautoko
Kei roto i tō tēpu hurihuri Fluance RT81 tētahi 2 Tau Rarangi a te Kaihanga. For warranty claims or technical support, please contact Fluance customer service directly.
Tautoko Kiritaki Ora is also provided by Fluance to assist with any questions or issues you may encounter with your turntable.
For additional resources, including detailed setup videos and FAQs, please visit the official Fluance webpaetukutuku, tirohia rānei te Aratohu Tīmata Tere kua whakaurua.
Image: The Fluance company logo, "FLUANCE. Serious Performance."