1. Kupu Whakataki
Thank you for choosing the EDM 03006 Compact Daily Programmable Timer. This device is designed to automatically control the power supply to your electrical appliances, helping you save energy and manage your daily routines efficiently. Please read this manual carefully before use to ensure proper operation and safety.
Nga korero haumaru
- Do not exceed the maximum load capacity of 3500W (16A, 250V).
- This timer is intended for indoor use only.
- Kaua e rumakina te taima ki te wai, kaua hoki e whakaaturia ki te makuku nui.
- Ensure the timer is securely plugged into a grounded wall socket.
- Do not attempt to disassemble or repair the timer yourself. Contact qualified personnel for service.
2. Hua Neke Atuview
The EDM 03006 timer features a mechanical dial for setting daily programs. Familiarize yourself with its components:
This image displays the EDM 03006 daily programmable timer. Key features visible include the central European Type F socket, a rotating dial with hour markings (AM/PM, NOON), and blue segments for setting program times. A red triangle indicates the current time, and a red LED light signifies power status.
- Central Socket: European Type F socket for connecting your appliance.
- Waea Hurihuri: Marked with 24 hours (1-12 AM, NOON, 1-12 PM).
- Blue Segments: Each segment represents a 15-minute interval. These are pushed in or pulled out to set ON/OFF times.
- Red Triangle Indicator: Shows the current time on the dial.
- Rama LED Whero: Illuminates when the timer is receiving power and the connected appliance is in an 'ON' state according to the program.
3. Tatūnga
- Wewete: Āta tango i te matawā i tōna tākai.
- Tūnga Tuatahi: Ensure all blue segments around the dial are in the 'OUT' position. This means the timer is initially set to OFF for all intervals.
- Tautuhi Wā Onāianei: Rotate the entire dial clockwise until the red triangle indicator points to the current time. For example, if it is 3:00 PM, align the red triangle with '3 PM'.
- Mono Mai: Insert the timer into a standard 250V AC wall socket. The red LED light should illuminate if the timer is currently in an 'ON' period or if the internal clock is running.
4. Nga Tohutohu Whakahaere
Te Tautuhi Waa Papatono
The timer allows you to set multiple ON/OFF periods throughout a 24-hour cycle using the blue segments.
- Each blue segment represents a 15-minute interval.
- To set an 'ON' period, push the corresponding blue segments inwards ki waenganui o te mata waea.
- To set an 'OFF' period, leave the corresponding blue segments in the outwards tūnga.
- Mo te example, to have an appliance turn ON from 6:00 PM to 7:00 PM, push in the four blue segments that correspond to 6:00 PM, 6:15 PM, 6:30 PM, and 6:45 PM.
- Once programmed, the timer will automatically switch the connected appliance ON and OFF according to your settings as the dial rotates with the current time.
Connecting an Appliance
Plug the appliance you wish to control into the central socket of the timer. Ensure the appliance's power switch is set to the 'ON' position if it has one, so the timer can control its power supply.
5. Tiaki
- Always unplug the timer from the wall socket before cleaning.
- Wipe the exterior of the timer with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or immerse the timer in water.
- Keep the timer free from dust and debris to ensure proper ventilation and operation.
6. Te Raru
| Raruraru | Take pea | Rongoā |
|---|---|---|
| Karekau te taputapu e ON/OFF i te mea kua whakaritea. | Incorrect program settings (blue segments). Kāore i te tika te whakatakoto i te wā o nāianei. Appliance switch is OFF. | Ensure blue segments are pushed IN for ON times and OUT for OFF times. Verify the red triangle indicator is aligned with the current time. Check that the appliance's power switch is in the 'ON' position. |
| Timer is not receiving power (Red LED is off). | Wall socket is not active. Timer is in an 'OFF' period. | Test the wall socket with another appliance. Check the blue segments around the current time; if they are all 'OUT', the timer is in an OFF state. |
| Timer makes a slight humming noise. | Normal operation of mechanical timers. | This is typically normal for mechanical timers and indicates the internal clock mechanism is functioning. |
7. Whakatakotoranga
- Waitohu: EDM
- Tauira: 03006
- Whakatauranga Hiko: 3500W (Max), 16A, 250V AC
- Ngā Ahu (Mōkihi): 17.3 x 9.4 x 7.9 cm
- Taumaha Tūemi: 180 g
- Puna Hiko: AC (Nau Tauutuutu)
- Programmable Intervals: meneti 15
- Ngā Huringa o ia Rā: 24 haora
- Momo turanga: European Type F
8. Pūtāhui me te Tautoko
Mō ngā mōhiohio pūtāhui, mō te tautoko hangarau rānei, tirohia ngā tuhinga i whakaratohia me tō hoko, whakapā atu rānei ki tō kaihokohoko. Puritia tō taunakitanga hoko mō ngā kereme pūtāhui katoa.