Simplex 3002-26D-41 Narrow Stile Mechanical Push-Button Lock User Manual

Kupu Whakataki

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Simplex 3002-26D-41 Narrow Stile Mechanical Push-Button Lock. This robust, keyless entry system is designed for narrow stile doors, offering reliable security without the need for batteries or wiring. Please read these instructions carefully before installation and use to ensure proper function and longevity of your lock.

Nga korero haumaru

• Always wear appropriate safety gear, such as eye protection, during installation.
• Me whakarite kia mau te whakamau i ngā wāhanga katoa kia kore ai e marere tūpono.
• Kaua e ngana ki te whakarerekē i te tikanga raka, nā te mea ka whakararu pea i te haumarutanga, ā, ka whakakorea hoki te pūtāhui.
• Tiakina nga waahanga iti kia kore e taea e nga tamariki.
• If you are unsure about any installation step, consult a qualified locksmith or professional installer.

Ihirangi mokete

Manatokona kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:

• Exterior Lock Assembly (with push-buttons)
• Interior Lock Assembly (with thumbturn)
• Latch/Deadbolt Mechanism
• Strike Plate and Dust Box
• Mounting Screws and Fasteners
• Tātauira Tāuta
• Nga Tohutohu Whakahaere me te Papatonotanga
• Key(s) for Override Function (if applicable)

Tatūnga me te Tāuta

Proper installation is crucial for the optimal performance of your Simplex lock. Follow these general steps. Refer to the included installation template for precise drilling instructions.

An image showing the Simplex 3002-26D-41 Narrow Stile Lock, featuring its satin chrome finish and integrated thumbturn for interior egress.

1. Taku tatau

1. Measure Door Dimensions: Ensure your door and frame are compatible with a narrow stile lock.
2. Apply Template: Secure the provided installation template to the door edge and face.
3. Rua rua: Carefully drill all necessary holes for the lock body, latch, and fasteners as indicated by the template.

2. Latch Installation

1. Whakauruhia te Reti: Slide the latch mechanism into the prepared hole on the door edge.
2. Riki Haumaru: Fasten the latch with the provided screws, ensuring it is flush with the door edge.

3. Lock Assembly Installation

1. Tāuta Huihuinga Waho: Position the exterior lock assembly (with push-buttons) onto the door, aligning the spindle with the latch mechanism.
2. Tāuta Huihuinga o roto: Place the interior lock assembly (with thumbturn) onto the door, ensuring proper alignment with the exterior assembly and spindle.
3. Secure Assemblies: Use the through-bolts and screws to firmly attach both assemblies to the door. Do not overtighten.

4. Strike Plate Installation

1. Align Strike Plate: Close the door and mark the position of the latch bolt on the door frame.
2. Tāuta Pereti Strike: Mortise the frame as needed and install the strike plate and dust box, ensuring the latch bolt engages smoothly.

5. Mahi Whakamatau

1. Test Latch: Ensure the latch retracts and extends smoothly.
2. Test Thumbturn: Verify the thumbturn operates freely from the inside.
3. Test Code Entry: Before closing the door, test the factory default code or your newly set code to ensure the mechanism engages.

Nga Tohutohu Whakahaere

Setting/Changing the Combination

The Simplex 3002-26D-41 lock uses a mechanical combination. To set or change the combination, you typically need to remove the interior cover plate and manipulate the code tumblers according to the detailed instructions provided with your lock's programming guide. This process usually involves:

1. Removing the interior cover.
2. Locating the code change mechanism (e.g., tumblers or pins).
3. Following the specific sequence to set your desired code.
4. Testing the new code before reassembling the lock.

Hiranga: Always record your new combination in a secure location. Do not share your combination with unauthorized individuals.

Unlocking from the Exterior (Code Entry)

1. Whakauruhia te Waehere: Press the buttons corresponding to your combination in the correct sequence.
2. Turn Handle/Lever: After entering the correct code, turn the exterior handle or lever to retract the latch bolt.
3. Open Door: The door will now open.
4. Maukati Anō: The lock automatically relocks when the door is closed and the handle/lever returns to its original position.

Unlocking from the Interior (Thumbturn)

From the interior side, simply rotate the thumbturn to retract the latch bolt and open the door. This provides immediate egress without needing to enter a code.

Key Override Function

If your model includes a key override, insert the key into the cylinder and turn it to retract the latch bolt. This function is typically used for emergency access or by authorized personnel for management purposes.

Te tiaki

Te horoi

• Horoia te taha waho o te raka ki te wai ngohengohe,amp kakahu.
• Āta karohia te whakamahi i ngā kaihoroi whakakoi, ngā whakarewa, ngā matū kino rānei, nā te mea ka kino pea te āhua o te peita.

Whakahinuhinu

• Periodically apply a small amount of graphite-based lubricant or a silicone spray to the latch bolt and internal moving parts.
• Do not use oil-based lubricants, as they can attract dust and debris, leading to mechanism issues.

Raparongoā

Whakatakotoranga

• Waitohu: Simplex
• Tau tauira: 3002-26D-41
• Momo Maukati: Mechanical Push-Button Lock with Key Override (if applicable)
• Rauemi: Chrome
• Mutu: Satin Chrome
• Whakamahinga Manakohia: Door Lock for Homes, Offices, and Buildings
• Nga Waahanga Kei roto: Panui
• Taumaha Tūemi: 2.7 Pauna
• GTIN/UPC: 085194241866

Pūtāhui me te Tautoko

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Simplex webpae. Puritia to tohu hoko mo nga kereme whakamana.