Pukapuka Kaiwhakamahi mō te Kaikohi Raraunga Pakari a Getac PS236

1. Kupu Whakataki

This manual provides detailed instructions for the Getac PS236 Rugged Handheld Data Collector. The PS236 is designed for demanding environments, featuring robust construction and integrated functionalities such as GPS, camera, and wireless connectivity. It operates on Windows Mobile 6.1 Professional.

Figure 1: Getac PS236 Rugged Data Collector. This image shows the front view of the yellow and black rugged handheld device, featuring a touchscreen display and a numeric keypad below it. The Getac logo is visible on the screen and below the keypad.

2. Tatūnga

2.1 Te Wetewete me te Tirotiro Tuatahi

Carefully unpack all components from the box. Verify that all standard accessories are present:

• Rechargeable 5600 mAh Li-ion Battery
• Pene Stylus
• Raukaha
• AC Kaihoko Kaari
• Tauira USB
• Aratohu Timata Tere

2.2 Tāuta Pūhiko me te Whakatau

1. Rapua te wahanga pākahiko kei muri o te taputapu.
2. Insert the 5600 mAh Li-ion battery, ensuring proper alignment of the contacts.
3. Whakaorangia te uhi o te wahanga pākahiko.
4. Connect the AC Wall Charger to the device's charging port and plug it into a power outlet. Allow the device to fully charge before first use.

2.3 Hiko Tuatahi

Press and hold the power button until the device powers on. Follow the on-screen prompts to complete the initial setup of the Windows Mobile 6.1 Professional operating system.

3. Nga Tohutohu Whakahaere

3.1 Whakaterenga Taketake

The PS236 features a touchscreen display and a numeric keypad for input. Use the stylus or your finger to navigate the touchscreen interface. The keypad allows for numerical input and quick access to certain functions.

3.2 Hononga

• Bluetooth 2.0 + EDR: Enable Bluetooth in the device settings to connect to compatible peripherals such as headsets or external sensors.
• WLAN 802.11 b/g (WiFi): Access Wi-Fi networks by scanning for available networks in the wireless settings and entering the required credentials.
• Optional 3G Modem: If equipped, activate the 3G modem for mobile broadband and voice/data communication.

3.3 Data Collection Features

• GPS: The integrated SiRF Star III chip GPS set with WAAS/EGNOS support provides accurate location data. Ensure GPS is enabled in settings for navigation and mapping applications.
• Kāmera: Utilize the 3MP (3 MegaPixel) camera with autofocus and LED flash for capturing images. Access the camera application from the main menu.
• Altimeter & G-Sensor: These sensors provide environmental data and device orientation information, which can be utilized by compatible applications.
• Optional Barcode Scanner/Imager: If your device includes the optional 1D Laser Barcode Scanner or 2D Barcode Imager, refer to the specific software instructions for scanning operations.

4. Tiaki

4.1 Te horoi

Hei horoi i te taputapu, whakamahia he ngohengohe, damp cloth. Avoid abrasive cleaners or solvents. For the display, use a screen-specific cleaning solution and a microfiber cloth. Ensure all ports are closed before cleaning to maintain the IP67 dust and water resistance rating.

4.2 Tiaki Pūhiko

To prolong battery life, avoid extreme temperatures and fully discharge and recharge the battery periodically. If the device will not be used for an extended period, store it with a partial charge (around 50%).

4.3 Nga Whakaaro Taiao

The Getac PS236 is designed to operate across an extremely wide range of temperatures. However, prolonged exposure to temperatures outside the specified operating range can affect performance and longevity. Always ensure port covers are securely closed to maintain the device's ruggedness ratings (IP67 and various MIL-SPEC classifications).

5. Te Raru

5.1 Kāore te Pūrere e Whakakā

• Me whakarite kia tika te whakaurunga o te pākahiko me te whakakii katoa.
• Connect the AC charger and attempt to power on the device.
• If the issue persists, the battery may need replacement or professional service is required.

5.2 Ngā Take Hononga (Nihokikorangi/Wi-Fi)

• Verify that Bluetooth or Wi-Fi is enabled in the device settings.
• Ensure you are within range of the access point or Bluetooth device.
• Check network credentials for Wi-Fi connections.
• Restart the device and attempt to reconnect.

5.3 Te Ngaronga o te Tohu GPS

• Me mohio kei te marama te taputapu view of the sky. GPS signals can be obstructed by buildings, dense foliage, or indoors.
• Verify that GPS is enabled in the device's location settings.
• Restart the GPS application or the device itself.

5.4 Mata Paa Kare e aro

• Perform a soft reset of the device (refer to the Quick Start Guide for instructions).
• Me whakarite kia ma te mata, kia kore hoki he paru.
• Mena ka mau tonu te raruraru, whakapā atu ki te tautoko.

6. Whakatakotoranga

For a quick data sheet, please refer to the official Getac webpae: http://us.getac.com/products/PS236/PS236_specification.html

7. Pūtāhui me te Tautoko

7.1 Nga Korero Whakaputanga

The Getac PS236 comes with a standard 90-day factory warranty. For detailed terms and conditions of the warranty, please refer to the documentation included with your device or contact Getac customer support.

7.2 Tautoko Kiritaki

For technical assistance, additional accessories, or further warranty inquiries, please contact your authorized Getac dealer or Getac customer support. Ensure you have your device's model number (PS236 / HWA131) and serial number ready when contacting support.