GBC Alpha Confetti Cross Cut Shredder (Model G2102023EU) User Manual

1. Kupu Whakataki

Thank you for choosing the GBC Alpha Confetti Cross Cut Shredder. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new shredder. Please read it thoroughly before use and retain it for future reference.

This shredder is designed for personal and small office use, capable of shredding paper and credit cards into confetti-cut particles for enhanced security.

2. Nga korero haumaru

WHAKATŪPATO: Failure to follow these safety instructions may result in fire, electric shock, or injury.

• Tiakina nga tamariki me nga kararehe mai i te kaitapahi.
• Tiakina nga kakahu taratara, nga whakapaipai, nga makawe, me nga here mai i te mokowhiti pepa.
• Kaua e kuhuhia maihao me etahi atu wahanga tinana ki roto i te mokowhiti pepa.
• Do not spray any flammable products or lubricants into or around the shredder.
• Do not shred adhesive labels or anything with glue, as this can cause jams and damage the cutting blades.
• Wewetehia te kaitapahi i mua i te neke, te horoi, te putu ranei i te ipu para.
• Do not operate the shredder if the power cord is damaged. Contact qualified service personnel.
• Ko tenei taputapu ehara i te mea mo te whakamahi ma te hunga (tae atu ki nga tamariki) he iti te kaha o te tinana, te tairongo, te hinengaro, te kore wheako me te mohiotanga, mena ka tukuna atu ki a raatau te tirotiro, te tohutohu ranei mo te whakamahi i te taputapu e te tangata whai mana mo to raatau haumaru.
• The shredder is designed for intermittent use. Allow the motor to cool down after continuous operation to prevent overheating.

3. Ihirangi mokete

Manatokona kei roto katoa nga mea kei roto i te kete:

• 1 x GBC Alpha Confetti Cross Cut Shredder Unit
• 1 x Manual Kaiwhakamahi (tenei tuhinga)

4. Hua Neke Atuview

The GBC Alpha Confetti Cross Cut Shredder is a compact and efficient device for securing your sensitive documents.

Figure 4.1: GBC Alpha Confetti Cross Cut Shredder. This image shows the main unit of the shredder, highlighting its compact design.

Figure 4.2: Dimensions of the GBC Alpha Confetti Cross Cut Shredder. The image displays the shredder with its length (323mm), width (155mm), and height (365mm) clearly marked.

Āhuatanga matua:

• Cross Cut Shredding: Shreds paper into 4x38 mm confetti cut strips, providing P-4 security level suitable for highly sensitive documents.
• Raukaha: Shreds up to 6 sheets of 70 gsm paper or 5 sheets of 80 gsm paper at once.
• Te haehae maha-rauemi: Capable of shredding paper, credit cards, paper clips, and staples.
• Ipu Para: Features a 14-liter bin capacity, holding up to 60 shredded sheets, with an easy lift-off head for convenient emptying.
• Parenga werawera: Automatic rest function for 30 minutes after 2 minutes of continuous shredding to prevent motor overheating.
• Mahi Haruru iti: Operates at a sound level of 72 dB, comparable to a hair dryer.
• Shredding Width: 223mm entry width.

Hua Ataata Nekeview:

5. Tatūnga

1. Wewetehia te Kaitapahi: Carefully remove the shredder from its packaging. Retain packaging for future transport or storage.
2. Whakanohoia te Kaipatu: Whakanohoia te kaitapahi ki runga i te mata papatahi. Me whakarite he waahi tika huri noa i te waahanga mo te hau me te uru ki te ipu para.
3. Hono Hono: Monohia te taura hiko ki tētahi putanga hiko noa. Me whakarite kia ngāwari te uru atu ki te putanga.
4. Takina Ipu Para: Ensure the waste bin is correctly seated in the shredder unit. The shredder will not operate if the bin is not properly aligned.

6. Nga Tohutohu Whakahaere

6.1 Paewhiri Mana

The shredder features a simple slide switch for operation:

• AUTO (I): The shredder is in standby mode. When paper is inserted, the shredder will automatically start and stop once shredding is complete.
• MATE (O): Ka weto te kaitapahi.
• REV (R): Reverses the shredding direction to clear paper jams.

6.2 Tapahi Pepa

1. Tautuhia te pana mana ki AUTO (I).
2. Insert up to 6 sheets of 70 gsm paper (or 5 sheets of 80 gsm paper) straight into the paper entry slot. Do not exceed the maximum sheet capacity.
3. The shredder will automatically detect the paper, shred it, and stop once the process is complete.
4. For best results, feed paper evenly and avoid folding.

Figure 6.1: Proper paper feeding technique. A person is shown feeding documents into the shredder's paper entry slot.

6.3 Te Kohi Kaari Nama

1. Tautuhia te pana mana ki AUTO (I).
2. Insert one credit card at a time into the designated credit card entry slot (usually located in the center of the paper entry).
3. The shredder will shred the card and stop automatically.

6.4 Parenga werawera

To protect the motor, the shredder is equipped with an overheat protection feature. If the shredder operates continuously for approximately 2 minutes, it will automatically shut off. Allow the shredder to cool down for at least 30 minutes before resuming operation. This prevents damage and prolongs the life of the unit.

7. Tiaki

7.1 Te Putua i te Ipu Para

1. Always switch the shredder to PUTU (O) and unplug it from the power outlet before emptying the bin.
2. Lift the shredder head off the waste bin.
3. Makahia nga mea kua kowhatu.
4. Whakakapihia te upoko o te kaitapahi ki runga i te ipu para.

7.2 Te Whakahinuhia nga Matapihi Whakawhiti

Regular oiling of the shredder blades is crucial for maintaining performance and extending the life of your shredder. Use GBC shredder oil or a vegetable-based oil (avoid aerosol lubricants).

1. Hoatu he raina angiangi o te hinu kaitapahi puta noa i te mokowhiti pepa.
2. Tautuhia te pana mana ki REV (R) mō te 5-10 hēkona hei tohatoha i te hinu.
3. Repeat this process after every 30 minutes of accumulated shredding or at least twice a month.

7.3 Te horoi

Horoia te waho o te kaitapahi ki te kakahu ngohengohe, maroke. Kaua e whakamahi i nga kai horoi me nga whakarewa.

8. Te Raru

9. Whakatakotoranga

10. Pūtāhui me te Tautoko

The GBC Alpha Confetti Cross Cut Shredder comes with a comprehensive warranty:

• Pūtāhui Mīhini: 2 Tau
• Shredder Cutter Warranty: 5 Tau

For warranty claims, technical support, or service inquiries, please contact ACCO Brands India Private Limited. Contact details can be found on the product packaging or the official GBC webpae.

Importer/Packer Contact Information:
ACCO Brands India Private Limited
Ground Floor, Plot No. 36, Irani Building, Balaram Street, Badar Baug, Grant Road East, Mumbai, Mumbai City, Maharashtra, India, 400007
Waea: +91-7738398210