HARIO Tea Pot 300ml Instruction Manual

Kupu Whakataki

Thank you for choosing the HARIO Tea Pot, Model CHAN-2SV. This teapot is designed for brewing and serving tea, featuring heat-resistant glass and a fine stainless steel mesh filter. This manual provides essential information for the safe and effective use of your new tea pot.

Nga korero haumaru

• Always handle the glass components with care to prevent breakage.
• The teapot is designed for hot liquids. Use caution when handling to avoid burns.
• Do not place the teapot directly on an open flame or heating element unless specifically designed for stovetop use (this model is not).
• Kaua e taea e nga tamariki.
• Ensure the lid is securely placed before pouring.

Waehanga

Your HARIO Tea Pot consists of the following main parts:

• Glass Teapot Body: Made from HARIO heat-resistant glass.
• Stainless Steel Filter Basket: A fine mesh filter for loose leaf tea.
• Lid with Plunger: Features a plunger mechanism to raise and lower the filter.
• Kakau: For safe and comfortable pouring.

Image: The stainless steel filter basket separated from the lid with its plunger mechanism.

Tatūnga

1. Wewete: Kia ata tangohia nga waahanga katoa mai i te kete.
2. Te horoi tuatahi: Before first use, wash all parts with warm soapy water and rinse thoroughly. Ensure all soap residue is removed.
3. Huihuia te Tātari: Attach the stainless steel filter basket to the bottom of the lid's plunger mechanism. Ensure it is securely fastened.

Nga Tohutohu Whakahaere

1. Tāpirihia ngā rau tī: Lift the lid with the attached filter. Place your desired amount of loose leaf tea into the stainless steel filter basket.
2. Tāpirihia te Wai Wera: Place the lid and filter assembly back onto the teapot. Ensure the filter is in the raised position (plunger up). Carefully pour hot water into the glass teapot body, covering the tea leaves in the filter. Do not overfill.
3. Tī Matao: Allow the tea to steep for the recommended time according to your tea type.
4. Whakamutua te Werohanga: Once the desired strength is reached, press the plunger down. This lowers the filter to the bottom of the teapot, separating the tea leaves from the brewed tea and stopping the infusion process.

Image: The HARIO Tea Pot with the plunger pressed down, indicating the tea leaves are separated from the brewed tea.

5. Pour Tea: Hold the handle firmly and carefully pour the brewed tea into your cup.

Image: A person pouring freshly brewed tea from the HARIO Tea Pot into a teacup.

Te horoi me te tiaki

• Haumaru te horoi rihi: The HARIO Tea Pot is dishwasher safe. Place all components on the top rack for best results.
• Horoi ringa: For hand washing, disassemble the filter from the lid. Wash all parts with warm soapy water using a soft sponge or brush. Rinse thoroughly to remove all soap residue.
• Te horoi i te tātari: The fine stainless steel mesh filter can be cleaned by unscrewing its bottom part for easy access to trapped tea leaves. Use a small brush if necessary to remove any stubborn residue.
• whakamaroke: Tukua kia maroke katoa nga wahanga i mua i te whakahiato me te penapena.
• Rokiroki: Store the teapot in a clean, dry place.

Raparongoā

• Tea leaves escaping the filter: Ensure the filter basket is securely attached to the lid. If using very fine tea, some small particles may pass through the mesh, which is normal for fine mesh filters.
• He uaua te whakatuwhera/kati i te taupoki: Ensure the lid and teapot rim are clean and free of tea residue. Avoid forcing the lid; gentle pressure should be sufficient.
• Glass appears cloudy: This may be due to mineral deposits from water. Use a solution of white vinegar and water to soak the glass, then rinse thoroughly.

Whakatakotoranga

Pūtāhui me te Tautoko

For warranty information, product support, or to inquire about replacement parts, please contact HARIO customer service directly. You can find more information on the official HARIO webpae, ma o raatau wharangi toa Amazon ranei.

Visit the HARIO Store: HARIO Official Store on Amazon