Pukapuka Kaiwhakamahi mō te Pūreretā Rīhiti Wera Tika Papamahi Monochrome Bixolon SRP-350II

1. Hua Neke Atuview

The Bixolon SRP-350II is a monochrome desktop direct thermal receipt printer designed for efficient and reliable point-of-sale (POS) operations. It utilizes direct thermal printing technology, eliminating the need for ink cartridges, resulting in quieter operation, faster print speeds, and reduced energy consumption compared to traditional dot-matrix printers. This printer is suitable for printing receipts, barcode labels, and other media up to 3 inches wide.

An image showing the Bixolon SRP-350II monochrome desktop direct thermal receipt printer, its power adapter, and power cables. The printer is black with a power switch on the side and indicator lights on the top panel. The power adapter and cables are also black.

2. Aratohu Tatūnga

2.1 Te Wetewete me te Tirotiro i ngā Ihirangi

Kia ata tangohia nga waahanga katoa mai i te kete. Manatokohia kei reira nga mea e whai ake nei:

• Bixolon SRP-350II Receipt Printer
• Pūurutau Hiko
• Waea hiko
• Receipt Paper Roll (starter roll)

2.2 Te Hononga i te Mana

1. Ensure the printer's power switch is in the OFF (O) position.
2. Honoa te taura hiko ki te urutau hiko.
3. Plug the power adapter's output connector into the power input port on the back of the printer.
4. Monohia te taura hiko ki te putanga hiko paerewa.

2.3 Connecting the Data Cable (Serial)

The SRP-350II features a serial interface for connectivity.

1. Locate the serial port on the back of the printer.
2. Connect a compatible serial cable (sold separately) from your host device (e.g., computer, POS system) to the printer's serial port.
3. Secure the cable connections if necessary.

2.4 Loading Receipt Paper

1. Open the paper roll cover by lifting the latch or pressing the release button.
2. Insert the new paper roll into the paper compartment, ensuring the paper feeds from the bottom of the roll.
3. Tōia he iti o te pepa ki tua atu i te taputapu tapahi.
4. Close the paper roll cover firmly until it clicks into place.

3. Nga Tohutohu Whakahaere

3.1 Kei te Hiko / Weto

• To power on: Flip the power switch on the side of the printer to the ON (I) position. The Power indicator light should illuminate.
• To power off: Flip the power switch to the OFF (O) position.

3.2 Rarama Tohu

The printer features several indicator lights on its top panel:

• Mana: E tohu ana kua whakakāhia te pūreretā.
• Hapa: Illuminates or flashes to indicate a printer error (e.g., paper out, cover open, print head overheating). Refer to the Troubleshooting section for details.
• Pepa: Illuminates when the paper roll is low or out.

3.3 Patene Whangai

The Feed button is located on the top panel. Pressing this button will advance the paper by one line. Holding it down will continuously feed paper.

3.4 Te Ta

Once the printer is powered on and connected to your host device, it will receive print commands from your POS software or application. Ensure your software is configured to use the correct printer model and serial port settings.

4. Tiaki

Regular maintenance helps ensure optimal performance and extends the life of your printer.

4.1 Te horoi i te Upoko Ta

The print head should be cleaned periodically, especially if print quality degrades or after changing many paper rolls.

1. Turn off the printer and disconnect the power cord.
2. Whakatuwheratia te uhi pukapuka pepa.
3. Using a cotton swab lightly moistened with isopropyl alcohol, gently wipe the thermal elements of the print head. Avoid touching the print head with bare hands.
4. Tukua kia maroke rawa te pane tā i mua i te katinga o te taupoki me te hono anō i te hiko.

4.2 Te horoi i te Rōra Platen

The platen roller helps feed the paper smoothly. Clean it if paper jams occur frequently or if paper feeding becomes inconsistent.

1. Turn off the printer and disconnect the power cord.
2. Whakatuwheratia te uhi pukapuka pepa.
3. Using a cotton swab lightly moistened with isopropyl alcohol, gently clean the surface of the rubber platen roller.
4. Rotate the roller manually to clean the entire surface.
5. Allow it to dry completely before closing the cover and reconnecting power.

4.3 Whakapai Whanui

Ūkuia te waho o te pūreretā ki te ngohengohe, damp kakahu. Kaua e whakamahi i nga kai horoi me nga whakarewa.

5. Te Raru

This section provides solutions to common issues you may encounter with your SRP-350II printer.

5.1 Karekau he Mana

• Ensure the power cord is securely connected to the printer, power adapter, and electrical outlet.
• Verify the power switch is in the ON (I) position.
• Whakamātauria te putanga hiko ki tētahi atu taputapu hei whakaū kei te mahi pai.

5.2 Kāore he Putanga Tā

• Check if the printer is powered on and the Power indicator light is illuminated.
• Ensure the serial data cable is securely connected to both the printer and the host device.
• Verify that the paper roll is loaded correctly and there is sufficient paper. The Paper indicator should not be lit.
• Confirm that your POS software or application is sending print commands to the correct printer and port.
• Check for any error lights.

5.3 Paper Jam

• Whakawetohia te pūreretā.
• Whakatuwheratia te uhi pukapuka pepa.
• Carefully remove any jammed paper. Avoid tearing the paper inside the mechanism.
• Ensure the paper path is clear before reloading the paper roll and closing the cover.

5.4 He Rawe te Kounga o te Ta

• The paper roll may be old or of poor quality. Replace it with a new, high-quality thermal paper roll.
• Whakapaihia te upoko ta i te korero i roto i te waahanga Tiaki.
• Ensure the paper roll is inserted correctly, with the thermal side facing the print head.

6. Whakatakotoranga

7. Pūtāhui me te Tautoko

For information regarding the product warranty, please refer to the documentation provided at the time of purchase or contact Bixolon customer support directly. Bixolon manufactures point-of-sale (POS) printers and related accessories.

For technical assistance or further inquiries, please visit the official Bixolon webpaetukutuku, whakapā atu ranei ki o raatau pokapū ratonga whai mana.