Melnor Fan Hand Spray with Rubberized Grip and Built-in Flow Control User Manual

Kupu Whakataki

The Melnor Fan Hand Spray (Model 56-6) is designed for efficient and gentle watering tasks. Its rubberized grip ensures comfortable handling, while the built-in flow control allows for precise water management. This manual provides instructions for proper setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your sprayer.

Nga Korero Haumaru Nui

WHAKATŪPATO: Ma tenei hua e whakaatu koe ki nga matū tae atu ki te styrene, e mohiotia ana e te Kawanatanga o California kia pa mai te mate pukupuku. Mo etahi atu korero, haere ki www.P65Warnings.ca.gov.

For outdoor use only. Always ensure a secure connection to prevent leaks. Do not use with hot water or harsh chemicals.

Tatūnga

1. Wewete: Carefully remove the Melnor Fan Hand Spray from its packaging.
2. Tirotiro: Check the sprayer for any visible damage.
3. Hono ki te Hose: Screw the threaded end of the sprayer onto a standard garden hose. Ensure the connection is tight to prevent leaks, but do not overtighten.

Image: The Melnor Fan Hand Spray (Model 56-6) with its rubberized grip, connected to a green garden hose. This illustrates the proper connection point for operation.

Nga Tohutohu Whakahaere

1. Whakakāhia te Wai: Slowly turn on the water supply from your spigot.
2. Activate Spray: Squeeze the handle to begin water flow.
3. Adjust Flow Control: Use the built-in flow control lever or dial to adjust the water volume and pressure. This allows for a gentle spray suitable for delicate plants or a stronger flow for general watering.
4. Fan Spray Pattern: The nozzle is designed to produce a wide, gentle fan spray pattern.
5. Whakaweto: Release the handle to stop the water flow. For complete shut-off, turn off the water supply at the spigot.

Te tiaki

• Te horoi: After each use, rinse the sprayer with clean water to remove any dirt or debris.
• Horoi Ringa Anake: As per product care instructions, this item is hand wash only. Do not use abrasive cleaners or put it in a dishwasher.
• Rokiroki: Store the sprayer in a dry, protected area away from direct sunlight and freezing temperatures. Disconnect from the hose during off-season storage.
• Te takurua: In cold climates, ensure all water is drained from the sprayer before storing to prevent damage from freezing.

Raparongoā

Kāore he Rere Wai, he Pēhanga Iti rānei:

• Check if the water supply is fully open.
• Ensure the hose is not kinked.
• Inspect the nozzle for blockages.

Leaks at Hose Connection:

• Tighten the connection between the sprayer and the hose.
• Check the rubber washer inside the hose connection for damage or proper seating. Replace if necessary.

Tauira Rehu Taurite:

• Inspect the nozzle opening for any debris or mineral buildup. Clean gently if obstructed.

Whakatakotoranga

Pūtāhui me te Tautoko

For warranty information or technical support, please refer to the official Melnor website or contact Melnor customer service directly. Keep your purchase receipt for warranty claims.

Melnor Official Webpae: www.melnor.com