Carrera Wireless+ Controller Instruction Manual

Kupu Whakataki

The Carrera Wireless+ Controller is designed for use with Carrera Digital 124 and Digital 132 slot car racing systems. This 2.4 GHz wireless controller provides freedom of movement, allowing racing from any point around the track within a 15-meter range. The controller features a built-in rechargeable battery that provides approximately 8 hours of racing on a single charge, which typically takes about one hour.

Image: Carrera Wireless+ Controller, showing its ergonomic design and buttons.

Nga korero haumaru

CAUTION - ELECTRIC TOY: Kaore i te taunakihia mo nga tamariki kei raro iho i te 8 nga tau. Ka rite ki nga hua hiko katoa, me tupato nga whakatupatotanga i te wa e whakahaere ana me te whakamahi kia aukati i te ru o te hiko.

• Mataki i nga tamariki i nga wa katoa e takaro ana.
• Kaua e whakaaturia te kaiwhakahaere ki te wai, ki te makuku nui rānei.
• Do not attempt to open or modify the controller, as this may void the warranty and pose a safety risk.
• Whakamahia anake te taura utu me te pūtake hiko kua tohua.

Ihirangi mokete

Me whakarite kei roto katoa nga mea kei roto i to kete:

• 1 x Carrera Wireless+ Controller
• 1 x Replacement Button
• 1 x Lithium Battery (pre-installed or included separately)

Image: Packaging of the Carrera Wireless+ Controller, showing product dimensions and key features.

Te utu i te Kaiwhakahaere

The Carrera Wireless+ Controller is powered by a Lithium battery. Before initial use, or when the battery is low, charge the controller fully.

1. Connect the charging cable to the controller's charging port.
2. Connect the other end of the charging cable to a suitable USB power source (e.g., computer USB port, USB wall adapter).
3. The charging indicator light on the controller will illuminate during charging.
4. A full charge typically takes approximately 1 hour. The indicator light will change or turn off once charging is complete.
5. A fully charged controller provides up to 8 hours of continuous racing.

Te honohono me te takirua

To use your Wireless+ Controller, it must be paired with your Carrera Digital 124/132 control unit.

1. Ensure your Carrera Digital 124/132 racing system is powered on.
2. Turn on the Wireless+ Controller by pressing the power button.
3. Follow the pairing instructions specific to your Carrera Digital control unit. This usually involves pressing a pairing button on the control unit and then on the controller within a short timeframe. Refer to your main track system's manual for detailed pairing steps.
4. Once successfully paired, the controller's indicator light will confirm the connection (e.g., solid light, specific color).

Nga Tohutohu Whakahaere

The Wireless+ Controller provides precise control over your slot car.

• Keu Keu: Pull the trigger to accelerate your car. Release to slow down.
• Lane Change Button: Press the designated button (often on the top or side of the controller) to initiate a lane change on tracks equipped with lane change sections.
• Mahi Parai: Some systems allow for braking by pushing the trigger forward or using a separate button. Consult your main track system's manual for specific braking functionality.
• Awhe: The 2.4 GHz wireless technology allows for operation up to 15 meters from the track, offering flexibility in your racing position.

Te Tiaki me te Tiaki

To ensure the longevity and optimal performance of your Carrera Wireless+ Controller, follow these care guidelines:

• Te horoi: Wipe the controller with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Rokiroki: Store the controller in a dry place, away from direct sunlight and extreme temperatures.
• Tiaki Pūhiko: For long-term storage, it is recommended to charge the battery to about 50% every few months to maintain battery health.
• Nga Waahanga Whakakapi: Use only genuine Carrera replacement parts, such as the included replacement button, if needed.

Raparongoā

If you encounter issues with your Wireless+ Controller, try the following:

• Karekau te Kaiwhakahaere e whakautu ana:
  • Me mohio kei te utuhia te kaiwhakahaere.
  • Manatokohia kei te whakakā te pūmana.
  • Re-pair the controller with the control unit.
  • Check for any obstructions between the controller and the track's receiver.
• Ora pūhiko poto:
  • Me whakarite kua whakakiia te kaiwhakahaere i mua i te whakamahi.
  • Battery performance may decrease over time with repeated charging cycles.
• pokanoa:
  • Other 2.4 GHz devices nearby may cause interference. Try to minimize other wireless activity during racing.

For further assistance, please contact Carrera customer support.

Whakatakotoranga

Ka mutu te huaview Ataata

Pūtāhui me te Tautoko

The Carrera Wireless+ Controller comes with a 30 Ra Rarangi mo nga hapa o te Kaihanga Kaihanga. For warranty claims or technical support, please contact Carrera customer service. Keep your proof of purchase for warranty validation.

For more information and support, visit the official Carrera webpaetukutuku, whakapā atu ranei ki ta raatau tari ratonga kaihoko.