Geberit PushControl Bathtub Drain and Overflow Unit Model 151.603 Instruction Manual

1. Kupu Whakataki

This manual provides detailed instructions for the installation, operation, and maintenance of your Geberit PushControl Bathtub Drain and Overflow Unit, Model 151.603. This unit is designed for bathtubs with depths ranging from 17 to 24 inches and features a 27-inch stainless steel cable for reliable operation. Please read this manual thoroughly before installation and use to ensure proper function and safety.

The Geberit PushControl system offers a convenient push-button mechanism for opening and closing the bathtub drain, providing a clean and modern aesthetic for your bathroom.

2. Nga korero haumaru

WHAKATŪPATO: Failure to follow these safety instructions could result in property damage, personal injury, or death.

• Always turn off the water supply before beginning any plumbing work.
• Mau taputapu tiaki whaiaro e tika ana, penei i nga karaehe haumaru me nga karapu, i te wa e whakauru ana.
• Me whakarite kia mau te hononga katoa, kia ātete hoki ki te wai hei ārai i ngā turuturu.
• Mena kaore koe i te tino mohio mo tetahi waahanga o te mahi whakaurunga, me toro atu ki tetahi tohunga paipa.
• Puritia nga waahanga iti kia kore e taea e nga tamariki kia kore e koowaotia.

3. Ihirangi mokete

Manatokona kei te noho nga waahanga katoa i mua i te tiimata o te whakaurunga:

• Geberit PushControl Bathtub Drain and Overflow Unit (Model 151.603)
• Brass trim (Polished Chrome)
• Riki kowiri tira
• 27" stainless steel cable (Teflon coated)
• Taputapu whakauru
• Gaskets and fasteners

4. Whakatakotoranga

5. Tāutanga

Before you begin, ensure you have all necessary tools and that the water supply to the bathtub is turned off. Refer to local plumbing codes for specific requirements.

5.1 Nga Utauta e Hiahia ana

• Te putty a te paramu, te hiri silicone rānei
• Ngā raka, ngā raka hongere rānei, ka taea te whakarite
• Tiki (Phillips me te upoko papatahi)
• Ripene ine
• Mohiti haumaru me nga karapu

5.2 Taahiraa-i-Taahiraa

1. Whakaritea te Kaukau: Ensure the bathtub drain and overflow holes are clean and free of debris. The overflow hole should be between 2" and 2-1/2" in diameter.
2. Install the Drain Shoe: Apply plumber's putty or silicone sealant around the underside of the drain flange. Insert the drain flange into the bathtub drain hole from the inside of the tub. From underneath the tub, attach the drain shoe assembly, ensuring the gasket is properly seated. Tighten securely with an adjustable wrench.
3. Tāutahia te Huinga Taupoki: Position the overflow gasket on the back of the overflow plate. Insert the overflow pipe assembly into the overflow hole from the outside of the tub. Align the overflow plate with the overflow hole from the inside of the tub and secure it with the provided screw. Ensure the cable is routed correctly and not kinked.
4. Honoa te Taura: Connect the 27" stainless steel cable to both the drain stopper mechanism and the PushControl overflow trim. Follow the specific instructions provided with the unit for proper cable attachment and adjustment. The installation tool included will assist with this step.
5. Connect to Waste Pipe: Connect the 1-1/2" tubular piping of the drain and overflow unit to your existing waste pipe system. Ensure all connections are tight and sealed to prevent leaks.
6. Whakamātautau mō ngā turuturu: Fill the bathtub with water and check all connections for any signs of leakage. Operate the PushControl mechanism several times to ensure the drain stopper opens and closes smoothly.

Image 1: Geberit PushControl Bathtub Drain and Overflow Unit (Model 151.603) showing the polished chrome trim and cable assembly. This image illustrates the main components of the unit.

6. Mahi

The Geberit PushControl system is designed for simple and intuitive operation.

• Hei Kati i te Waikeri: Firmly press the center of the overflow trim plate. The drain stopper will move into the closed position, allowing the tub to fill with water.
• Hei Whakatuwhera i te Waikeri: Firmly press the center of the overflow trim plate again. The drain stopper will release, allowing water to drain from the tub.

Ensure the mechanism operates smoothly. If you experience resistance, refer to the Troubleshooting section.

7. Tiaki

Regular cleaning and maintenance will ensure the longevity and proper function of your Geberit PushControl unit.

• Cleaning the Trim: Clean the polished chrome trim with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals, abrasive pads, or acidic cleaners, as these can damage the finish.
• Cleaning the Drain: Periodically remove the drain stopper and clean any hair or debris that may have accumulated in the drain opening.
• Tirohanga taura: Annually inspect the stainless steel cable for any signs of wear or damage. While the cable is Teflon coated for durability, extreme conditions or improper use can cause wear.

8. Te Raru

If problems persist after attempting these solutions, please contact Geberit customer support or a qualified plumber.

9. Pūtāhui me te Tautoko

Geberit products are manufactured to the highest quality standards and come with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Geberit webpae.

For technical assistance, replacement parts, or further support, please contact Geberit customer service:

• Webpae: www.geberit.com
• Ratonga Kiritaki: Tirohia te Geberit webpae mo nga korero whakapā a rohe.

Ina whakapā atu koe ki te tautoko, me whakarite kia wātea mai te nama tauira o tō hua (151.603) me te rā i hokona ai.