CREATE Wipebot Window Cleaning Smart Robot


Thank you for choosing our windows cleaner. Before using the appliance, and to ensure the best use, carefully read these instructions.
The safety precautions enclosed herein reduce the risk of death, injury and electrical shock when correctly adhered to. Keep the manual in a safe place for future reference, along with the completed warranty card, purchase receipt and package. If applicable, pass these instructions on to the next owner of the appliance. Always follow basic safe­ty precautions and accident prevention measures when using an electrical appliance. We assume no liability for customer failing to comply with these requirements.


Rehefa mampiasa fitaovana elektrika rehetra dia tokony hotandremana foana ny fepetra fiarovana fototra.

  • Carefully inspect the safety cable, ensure there’s no damage on it and that it is toughly buckled to an object.
  • When the product is working high above the ground, reserve warning marks on the ground.
  • Don’t spray water into this product and don’t use this product on glass with cracks.
  • When you are cleaning the external surface of this product, turn it off. Avoid the per­sonal injuries caused by the running product.
  • Don’t touch the rotating parts or openings of this product with your hand or any other part of your body.
  • When you are operating this product, please follow the instructions in this manual. lf you can’t solve the troubles, contact the customer service directly. Don’t repair this product without authorization, it may result in personal injury.
  • Lt can only be used in the home environment.
  • Don’t use a charger from a third party, or remove the frame, battery and charger with­out authorization.
  • When a damage or crack occurs to this product, don’t use it anymore and contact the customer service.
  • Keep the charger far away from heating sources.
  • lf you want to transport this product, we recommend to use the original package and turn off the product.
  • In case this product is not going to be used in a long period of time, fully charge it and turn it off. Store this product in a cool and dry place. This product shall be charged at least every three months to prevent the battery from being out of service caused by storing in for a too long period of time.
  • Guarantee the glass is dry. Don’t use this product under the condition of rain, or when the glass is wet and has mist on it.

FIZARANA CREATE-Wipebot-Window-Cleaning-Smart-Robot-1

side VIEW CREATE-Wipebot-Window-Cleaning-Smart-Robot-2

  1. ON/OFF/Pause button
  2. Error indicator light
  3. Fivoahan'ny rivotra
  4. Mpiandry mop
  5. 5. Safety cable
  6. Error indicator light (green/red)
  7. Upgrade port (for factory use only)
  8. Safety cable mounting hole

Votoatin'ny boaty CREATE-Wipebot-Window-Cleaning-Smart-Robot-3


  1. Ensure the knob of the safety cable is fully tightened to the frame. We recommend to fasten the buckle side of the safety cable to an object which is strong enough and will not be dragged, and reserve a suitable length for the device to work.
  2. Cover the holders with a mop. Ensure they are toughly con­nected, flush with each other and have no air leakage. CREATE-Wipebot-Window-Cleaning-Smart-Robot-4
  3. Insert the windows cleaner power cord to the end of the adapter and tighten them.
  4. Insert two AAA battery to use the remote control.CREATE-Wipebot-Window-Cleaning-Smart-Robot-5


  • Ensure the power line and plug are completely connected.
  • Long-press the power button (more than 3 seconds), the robot will turn on. After the fan is running, attach the robot on the glass to a location far away from the window frame.
  • Ensure the robot is stuck on the window and then release it.
  • Short press the power button to start the robot.
  • When the robot is running, hold the safety cable with one hand, and take down the robot with the other hand.
  • lf your hand can’t reach the robot, please use the remote or the safety cable to pull it back. Pull the robot from one side which is as close to the glass as possible and prevent pulling off the robot.
  • After completely taking down the robot, long-press the power button (more than 3 seconds) to stop it.


  • This robot is equipped with an internal battery, which can hold on the robot for twenty minutes in case the robot is accidentally removed from the power cord and it will raise an audible and visual alarm. Please take down the robot as soon as possible.
  • When the light indicator is red before turning on the device, it means the internal bat­tery is too low to start the robot. Please, keep the robot connected to the electricity to charge it until the red lamp tsy mandeha.

PATH PLANNING INSTRUCTIONS CREATE-Wipebot-Window-Cleaning-Smart-Robot-6

  • Put the windows cleaner in the centre of the glass far away from the window frame. Long press the Power/Start button to turn the robot on, and then short press the but­ton to start it. The robot will automatically move upward, then move right. At last, it will reach the top right corner of the glass.
  • After the robot has reached the top right corner, it will start to clean the glass by draw­ing an s-shaped curve from top to bottom.
  • After completing the cleaning, the robot will stop at the lower-left or right corner ac­cording to the glass shape.


  1. Error indicator light
  2. Error indicator light (green/red)

Normal condition: The error indicator (red/green) keeps on in green.
Built-in battery too low to start: The indicator is on in red.
Built-in battery charged enough to start: The red indicator turns off.
The friction coefficient is too big or too small during the self-inspection
Power off: T
he indicator is on in red and it emits a short and continuous sound.
Hardware trouble: The error indicator (red/green) is flashing red and green alternately. The alarm sound is on.
Window cleaning is completed: Long alarm sound repeated for three times.

Toro-lalana momba ny fifehezana lavitra CREATE-Wipebot-Window-Cleaning-Smart-Robot-8


  1. When the error indicator is flashing red with continuous and short sounds, please inspect if:
    • the plug of the power cord is loosened or damaged and results in power off or poor contact;
    • the glass or mop is too wet and results in too low friction;
    • the glass has impurities attached and results in too high friction;
    • the mop holder is incorrectly installed and results in air leakage;
    • the suction port is blocked.
  2. The error indicator is flashing red and green alternately with alarming sound. It means trouble occurs on the inside hardware of the robot, please contact the customer ser­vice directly. On the condition of special glass, when cleaning the bottom of glass, it needs more time for cleaning up, please use remote control.
  3. When the robot is moving up, it can’t reach the upper positon of the glass due to slip­ping, please press the Pause Button, and control the robot by the buttons [email voaaro] and ([§l on the remote control to continue the cleaning to left/right direction.
  4. In the case of the robot can’t walk freely, please change the mop or inspect the screws on the cleaning roller, ensure they are not loosened.
  5. After cleaning, there’s residual round marks on the glass surface, please change a new mop, and spray the cleaning agent to the lower mop holder 2-3 times.
  6. After completing the whole process of cleaning, the robot continues to move and doesn’t stop automatically, press the Pause Button and take it down.
  7. When it is in use, maybe bug occurs occasionally, please restart the robot as the solution.


  • In case of sand and dust on the surface of the glass, please clean it with a dry mop; otherwise, the wet mop will mix with the sand and dust, and scrape the glass.
  • When there are no sand and dust, lightly spray 2-3 times of the cleaning agent on the mop or glass, don’t make it excessively wet.

In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in electric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package indicates that the product at the end of its service life shall be collected as separate waste. Therefore. any products that have reached the end of their useful life must be given to waste disposal centres specialising in separate collection of waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimises the recycling and reuse of com­ponents making up the apparatus. Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws.

Documents / Loharano

CREATE Wipebot Window Cleaning Smart Robot [pdf] User Manual
Wipebot Window Cleaning Smart Robot

Leave a comment

Ny adiresy email dia tsy ho namoaka.