ECOELER YDM003 Single Pole Digital Dimmer Switch User Manual

Sava lalana

This manual provides detailed instructions for the installation, operation, and maintenance of your ECOELER YDM003 Single Pole Digital Dimmer Switch. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.

Information momba ny fiarovana

• FAMPITANDREMANA: Mba hisorohana ny afo, ny fahatafintohinana, na ny fahafatesana, vonoy ny herinaratra eo amin'ny fiatoana na ny vata fanenitra ary andramo fa maty ny herinaratra alohan'ny hametahana tariby.
• Ny fametrahana azy dia tsy maintsy ataon'ny elektrisianina mahafeno fepetra na mifanaraka amin'ny fehezan-dalàna momba ny herinaratra eo an-toerana.
• This dimmer switch is for single-pole applications only. Do not use in 3-way or 4-way circuits.
• A neutral wire is REQUIRED for this device to function. Ensure your electrical box has a neutral wire (usually white) before installation.
• Do not use with smart bulbs.
• Aza mihoatra ny wat ambony indrindratage ratings: 150W for dimmable LED/CFL bulbs, 300W for incandescent/halogen bulbs.

Inona no ao anaty boaty

• 1 x ECOELER YDM003 Digital Dimmer Light Switch
• 1 x Rindrina takelaka
• Torolàlana fametrahana
• Fametrahana screws

Fametrahana sy fametrahana

1. Vonoy ny hery: Before starting, ensure power is OFF at the circuit breaker or fuse box to prevent electrical shock.
2. Verify Wiring:

   Confirm that your electrical box contains a neutral wire (typically white). This dimmer requires a neutral wire for proper operation. Identify the Hot (Line), Load, Ground, and Neutral wires.

   

   Image: Wiring diagram for the ECOELER dimmer switch, illustrating connections for Hot (black), Load (red), Ground (green), and Neutral (white) wires. The diagram emphasizes that a neutral wire is required.

3. Wire fifandraisana:
   • Connect ny Hot (Line) wire from the wall box to the dimmer's black wire.
   • Connect ny entana wire (to the light fixture) from the wall box to the dimmer's red wire.
   • Connect ny tany wire from the wall box to the dimmer's green wire.
   • Connect ny tsy miandany wire from the wall box to the dimmer's white wire.
   • Ampifandraiso amin'ny voanjo tariby ny fifandraisana rehetra.
   

   Image: A detailed diagram showing the ECOELER dimmer switch connected to a single-pole circuit. It clearly labels the Hot (black), Load (red), Ground (green), and Neutral (white) wires, emphasizing the neutral wire requirement.

4. Tendrombohitra ny dimmer: Carefully fold the wires and push the dimmer into the wall box. Secure it with the provided screws.
5. Mametraka takelaka rindrina: Attach the decorative wall plate over the dimmer switch.
6. Ampodio hery: Avereno ON ny herinaratra amin'ny fiatoana.

Torolàlana miasa

Main Controls

Sary: Nisy nipoaka view diagram of the ECOELER dimmer switch, highlighting its main components: the Dim/Brighten buttons, the ON/OFF button, the LED indicators for brightness level, and the hidden trim dial for adjustment.

• Bokotra ON/OFF: Press the large paddle switch to turn lights ON or OFF.
• Dim/Brighten Buttons: Use the small up (▲) and down (▼) buttons to adjust the brightness level. There are 13 dimming levels.
• LED famantarana: The 7 LED lights indicate the current brightness level.
• Fade On/off: Lights will gradually illuminate or dim to protect your eyes and extend bulb lifespan. The lowest LED indicator remains softly lit for easy location in the dark.

Minimum Brightness Adjustment (Trim Dial)

The trim dial allows you to set the minimum brightness level to prevent flickering or premature turn-off at low settings, especially with certain LED bulbs.

Image: A visual guide demonstrating how to adjust the minimum brightness using the trim dial. It shows removing the rocker cover, locating the dial, and turning it clockwise for brighter minimum or counter-clockwise for less bright minimum.

1. Turn on the dimmer and adjust it to the lowest setting using the down (▼) button.
2. Carefully remove the rocker cover (the large paddle switch) to expose the trim dial.
3. Use a small screwdriver to rotate the "Trim Dial".
   • Turn clockwise (+) to increase the minimum brightness.
   • Turn counter-clockwise (-) to decrease the minimum brightness.
   Adjust until the preferred lowest light level is achieved without flickering.
4. Replace the rocker cover.

mifanentana

The ECOELER YDM003 dimmer switch is designed for wide compatibility with various bulb types:

• Dimmable LED bulbs up to 150W
• Dimmable CFL bulbs up to 150W
• Incandescent or Halogen bulbs up to 300W

Zava-dehibe: This dimmer is NOT compatible with smart bulbs. Ensure your bulbs are explicitly labeled as "dimmable" for optimal performance.

Image: The ECOELER dimmer switch displayed next to illustrations of compatible bulb types: 150W/120V Dimmable LED Lamp, 150W/120V CFL Lamp, and 300W/120V Incandescent Lamp.

fikarakarana

• Mba hanadiovana ny switch dimmer sy ny takelaka rindrina, fafao amin'ny lamba malefaka.amp lamba. Aza mampiasa mpanadio abrasive na solvents.
• Ensure power is off at the circuit breaker before cleaning.
• Periodically check for loose connections or signs of wear. If any issues are found, consult a qualified electrician.

Fanamboarana

fepetra arahana

Warranty sy fanohanana

ECOELER provides a one-year limited warranty against manufacturing defects under normal use. Replacement or refund services are available. For support or warranty claims, please contact the seller via Amazon.

For additional information or assistance, visit the ECOELER Store on Amazon.