MERTTURM-logo

MERTTURM 3-19 Galaxy Aurora Projector

MERTTURM-3-19-Galaxy-Aurora-Projector

Thank you for purchasing our product, please read the instruction manual carefully before using. When you receive the package, please check whether the product is defective or not carefully. For any further issues, please send the buyer message to our customer service.

PACKING LIST

  • Star Night Light x 1
  • Remote Control x 1
  • User Manual x 1
  • Charging Cable x 1

INSTRUCTIONS

  1. Connect the machine and the power adapter with USB cable, and then plug the adapter into the AC outlet.MERTTURM-3-19-Galaxy-Aurora-Projector-fig-1
  2. Press the turn on button and control the light effects by using remote control.MERTTURM-3-19-Galaxy-Aurora-Projector-fig-2
  3. Open the bluetooth speaker: after turn on the machine, you will hear a voice belong to bluetooth. You could search and connect the device which named “HN 108” with your phone. Once bluetooth pairing successful, you can play the music after then.
  4. Bluetooth 5.0 2.4GHz with low power consumption and long distance. The bluetooth chip memory is 16MB, and the bluetooth receiving distance is 30 meters open. Working frequency band: 2.4-2.48GHz license free ISM frequency band.

HOW TO USE REMOTE CONTROL

MERTTURM-3-19-Galaxy-Aurora-Projector-fig-3

MERTTURM-3-19-Galaxy-Aurora-Projector-fig-4

SPECIFlCATION

  • Input Power: USB DC 5V/2A
  • Laser Generator Wavelength:  515·532nm(green)
  • LED(RGBW):  3W
  • Operating Temperature: o-3o•c;32-a9•F
  • Projection Range: 15-50
  • Energy Consumption: Less than BW
  • Dimension:  14x13x6.6cm
  • Weight:  295g

NOTICE

  1. Please operate the projector according to the manual.
  2. The product is for indoor use only.
  3. Avoid humid places.
  4. After 4 hours of use we highly recommend to turn off the machine to allow the laser diode to cool down.
  5. Do not turn it on and off too frequently.
  6. Avoid to glare the light directly to protect the eyes.
  7. The working voltage is USB DCSV. NO EXCEED this range or the lifetime will be shortened. Please use a power adapter greater than 2A. The product will not work normally if the current is too small.

AFTER-SALES SERVICE

For any further after-sales issues, please send the buyer message to our store or email us by support@mertturm.com.

Documents / Resources

MERTTURM 3-19 Galaxy Aurora Projector [pdf] User Manual
3-19, 3-19 Galaxy Aurora Projector, 3-19, Galaxy Aurora Projector, Aurora Projector, Projector

References

Leave a comment

Your email address will not be published. Required fields are marked *