meliconi EASY 100 Remote Control User Guide
Charging Instruction
The remote control reproduces the infrared signals of the original remote control. Radio frequency functions (e.g. voice commands and pointer) are not supported.
The EASY 100 remote control is ready to work with SAMSUNG digital TVs; if you are unable to operate the TV, or if some functions do not produce the desired effect, you can use an alternative remote control keys configuration using the procedures below.
Instruction
www.cme.it
At www.cme.it you can view the functions on the keyboard for each configuration and the complete instructions in PDF format (including the learning function guide).
Remote Instruction
- Turn on the TV.
- Press and hold the number button “2” for at least 8 seconds. Three final flashes of the LED indicate that the operation has ended smoothly.
- Now check that the buttons on the remote control operate smoothly.
To reset the remote control and return to the initial condition, perform procedure “B” using digit key 1
IT 02 / 66012766
IT telecomandi@meliconi.com
FR hotline@meliconi.fr
Documents / Resources
 | meliconi EASY 100 Remote Control [pdf] User Guide PJN23028, L0808056, EASY 100 Remote Control, EASY 100, Remote Control, Control, Remote |
