MEIKEE B04-23FLB-30S1-M-C LED Flood Light With Motion Sensor
LED Flood Light with motion sensor
Thank you for purchasing MEIKEE products. To ensure a better shopping experience, please follow the instructions for use step by step. If you have any questions about our products, please contact our customer service, our after-sales team will contact you at the first time and resolve any problems about the products.
E-mail: meikee@meikeelighting.com
WARNING
- The LED module can’t be replaced, you need to replace the entire lamp if it damaged or reach the service life.
- If the wire is damaged, the lamp can no longer be used and needs to be scrapped.
- If the casing breaks or water enters, the lamp can no longer be used and needs to be scrapped.
- Do not stare at the LED light-emitting surface closely for a long time, to prevent the hurt of the eye.
- Under no circumstances should the luminaire be covered by a thermal pad or similar material.
- The Lamp requires professional electrician to install.
- The IP66 waterproof grade is just for rainproof, the lamp can not be immersed in water, otherwise it may cause leakage.
- The terminal block is not included. (Please prepare the terminal block according to your actual needs)
Dimension
Component and structure diagrams
- Lamp beads
- Reflective film
- Glass mask/PC cover
- Metal bracket
- Screws
- Motion sensor
How to install
- Step 1: Drill two mounting holes according to the distance of the screw holes on the bracket.
- Step 2: Put expansion screws in the prepared mounting holes, then place the bracket in the mounting position and fix with screws.
- Step 3: Adjust the direction of light and the inspection range of the sensor according to your need.
- Step 4: Connect the wires.
Notification
The detection distance depends on the ambient temperature. If the ambient temperature is close to or higher than the human body temperature, the sensing detection distance will become shorter. This means you need to get closer to this light. Conversely, if the ambient temperature is lower than the human body temperature, this sensing detection distance will be farther.
Routine maintenance
- To ensure better lighting, please clean the fixtures regularly.
- Before maintenance, make sure the power is disconnected.
- To avoid damage of the lamp, please do not clean it with chemicals.
Parameter
| Power | Lumen | Lighting Range | Installation Height | Shell | Input Lead | CRI | Color Temperature | Waterproof Rating | Input voltage | Ta | ||
| us | UK | |||||||||||
| ow | 1700 | 3-4M | 2.5-3.5M | Plastic-clad aluminum | L/N | >70 | 2700K/6500K | IP66 | AC120V/60HZ | AC230V/50HZ | -25″C-40t: | |
| FLB030 | 30W | 2600 | 4-6M | 3.5-5.0M | Plastic-clad aluminum | L/N | >70 | 2700K/6500K | IP66 | AC120V/60HZ | AC230V/50HZ | -25″C-40t: |
| FLB050 | 50W | 4300 | 6-8M | 5.0-7.0M | Plastic-clad aluminum | L/N | >70 | 2700K/6500K | IP66 | AC120V/60HZ | AC230V/50HZ | -25 c-4o·c |
| FLB080 | BOW | 7200 | 7-9M | 6.0-8.0M | Plastic-clad aluminum | L/N | >70 | 2700K/6500K | IP66 | AC120V 60HZ | AC230V/50HZ | -25·c-4o·c |
| When the sensor triggered, the light will light up for 30s (fixed lighting time can’t be adjusted), and only working at night(can’t work during the day). | ||||||||||||
Company nane: Shenz hen Ounei ke Li ghti ng Technol ogy Co. , Ltd.
Address: No. 19-20,Anye Road, Yuanshan Street, Longgang District, Shenzhen, Guangdong, China ( +86 0755-28608199)
C&E Connection E-Commerce (DE) GmbH Zum Linnegraben 20, 65933, Frankfurt am Main, Germany
- Tel:+49 (069) 27246648
CET PRODUCT SERVICE LTD. Beacon House Stokenchurch Business Park, Ibstone Rd, Stokenchurch High Wycombe HP14 3FE UK
- Tel :+447419325266
- E-mail:info@cetproduct.com
Documents / Resources
 | MEIKEE B04-23FLB-30S1-M-C LED Flood Light With Motion Sensor [pdf] User Manual B04-23FLB-30S1-M-C LED Flood Light With Motion Sensor, B04-23FLB-30S1-M-C, LED Flood Light With Motion Sensor, Light With Motion Sensor, Motion Sensor, Sensor |
