MEEC - Logo

Item no. 016491
1000 mm

MEEC TOOLS 016491 Tile Cutter - Cover

OPERATING INSTRUCTIONS

Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions).

Jula reserves the right to make changes.
For latest version of operating instructions, see www.jula.com

MEEC TOOLS 016491 Tile Cutter - Product Ovrview 1MEEC TOOLS 016491 Tile Cutter - Product Ovrview 2

MEEC TOOLS 016491 Tile Cutter - Product Ovrview 3

MEEC TOOLS 016491 Tile Cutter - Product Ovrview 4

MEEC TOOLS 016491 Tile Cutter - Product Ovrview 5

text

MEEC TOOLS 016491 Tile Cutter - Product Ovrview 7

MEEC TOOLS 016491 Tile Cutter - Product Ovrview 8

MEEC TOOLS 016491 Tile Cutter - Product Ovrview 9

MEEC TOOLS 016491 Tile Cutter - Product Ovrview 10

SAFETY INSTRUCTIONS

  • Wear safety glasses and safety gloves when using and replacing the scoring wheel.
  • Split tiles have sharp edges — risk of cut injuries.
  • Keep children and pets at a safe distance from the product and its scoring wheel.
  • The product is intended for splitting glazed tiles and must not be used for any other purpose.

SYMBOLS

Read the instructions.
Approved in accordance with the relevant directives.
Recycle discarded product in accordance with local regulations.

TECHNICAL DATA

Max edge length, straight cuts 1000 mm
Max edge length, diagonal cuts 705mm
Max cut thickness 14mm
Scoring wheel size 22x6x6mm

DESCRIPTION

Robust high precision tile cutter. Replaceable scoring wheel made of tungsten carbide included.

  • Adjustable fence made of aluminium and graduated in cm.
  • Adjustable guide made of aluminium for diagonal cutting.
  • Breaking head with magnet that holds it up to prevent it interfering with the movement of the scoring wheel.
  • Fold-out aluminium legs for large tiles.

HOW TO USE

STRAIGHT CUTS

  1. Place the product on a horizontal and stable surface.
    BILD 2
  2. Setaright angle (90°).
    FIG. 3
  3. Fold forward the pressure plate.
    FIG. 4
  4. Place the tile on the rubber coated base plate.
  5. Score a straight snap line.
    FIG. 5
  6. Fold down the pressure plate against the tile near the front edge.
  7. Snap the tile by pressing It down.
    FIG. 6

DIAGONAL CUTS

  1. Place the product on a horizontal and stable surface.
  2. Set an angle of 45°,
    FIG. 7
  3. Fold forward the pressure plate.
  4. Place the tile diagonally on the rubber coated base plate.
    FIG. 8
  5. Score a straight snap line.
    FIG. 9
  6. Fold down the pressure plate against the tile near the front edge and snap the tile by pressing It down.
    FIG. 10

REPLACING THE SCORING WHEEL

Unscrew the scoring wheel axle with a screwdriver, fit a new wheel, and replace the axle.
FIG. 11

MAINTENANCE

STORAGE
Store the tile cutter in a dry and safe place when not in use.

JULA AB, BOX 363, SE-532 24 SKARA
2022-01-14
© Jula AB

Documents / Resources

MEEC TOOLS 016491 Tile Cutter [pdf] Instruction Manual
016491, Tile Cutter

Leave a comment

Your email address will not be published. Required fields are marked *