MEARI Speed 11S Indoor Pan/Tilt Camera User Guide
What’s in the box
Please consult this checklist for all parts.
Speed 11S Bracket Screws
Power adapter Wrench User manua
After fixing your camera, please lock this screw
When ajusting your camera angle, please lock this screw (Optional)
- Fix the bracket on the wall
- Install the camera in the bracket and lock it with the screw
Smart Life or Tuya Smart is available for both iOS and Android OS. Search the name ‘SmartLife’,’Tuya Smart’ in App Store or Google Play, or scan the QR- Code to download the App. You can select the App according to needs.
Set up router
The router supports the 2.4GHz WiFi (doesn’t support the 5GHz), and is connected to the WiFi network.Please set the parameters of the router before connecting the WiFi network, and record the SSID and password of your WiFi
Step 2 Input a legal and valid Mobile number or Email address and click “Get Verification Code”. Input the verification code to log in.
QR Code Configuration
- Open the Smart Life App, click “My” >> “Home Management” >> “Create a home”, and you can customize the home name and related settings .
- Click “Add Device” or “+”, and then select “Security & Sensor” >> “Smart Camera” to add camera.
- Power on and reset camera until the status indicator is flashing quickly or a prompt tone is heard, and then click “Next”. Then input your WiFi’s passwords and click “Next” Click “” to change network.
- Camera only supports 4GHz WiFi network.
- The number of bits in the ssid and passwords of the router should not exceed 24 digits
- In this interface, you should scan the QR code in your phone with the camera,when the camera comes out “dong dong dong”. And you can complete the configuration about 30s.
- When connecting, you should make sure your router ,mobile, and camera are as close as possible. When camera added successfully ,click “you could also DIY the camera’s name.
In “Smart Camera” interface,click ” “,you can set the camera common functions.
Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again.
Q: Why is it still in the list of devices after reseting?
A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device again by the App.
Q: Why doesn’t the device identify the SD card?
A: It is recommended to plug in SD card after power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card can´t be identified when the internet environment is not good.
Q: Why I can´t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened;Message notification and authority confirmation in the mobile phone system have been opened.
You can rotate the camera horizontally by the App on your smartphone, and adjust vertical angle manually, so that you can get a wide vision.
Flip your video stream up or down for maximum flexibility.
The camera can detect movements, and then send you push notifications and app alerts.
Support 24H continuous recording with high capacity SD storage.
Day & Night
Never miss a moment, even in complete darkness, with powerful night-vision technology.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and consider removing the no- collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Caution! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Read More About This Manual & Download PDF:
Documents / Resources
|MEARI Speed 11S Indoor Pan/Tilt Camera [pdf] User Guide|
SPEED11, 2AG7CSPEED11, Speed 11S, Indoor Pan Tilt Camera, Speed 11S Indoor Pan Tilt Camera