Features

• Constant Voltage + Constant Current mode output
• Metal housing with class I design
• Built-in active PFC function
• Class 2 power unit
• IP67 / IP65 rating for indoor or outdoor installations
• Function options: output adjustable via potentiometer; 3 in 1 dimming; Timer dimming
• Typical lifetime > 62000 hours
• 7 years warranty

Applications

• LED street lighting
• LED high-bay lighting
• Parking space lighting
• LED fishing lamp
• LED greenhouse lighting
• Type “HL” for use in Class I , Division 2 hazardous (Classified) location.
  

GTIN CODE

MW Search: https://www.meanwell.com/serviceGTIN.aspx

Description

HLG-80H series is a 80W AC/DC LED driver featuring the dual mode constant voltage and constant current output. HLG-80H operates from 90 ~ 305VAC and offers models with different rated voltage rangingbetween 12V and 54V. Thanks to the high efficiency up to 91%, with the fanless design, the entire series is able to operate for -40°C ~ +80°C case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HLG-80H is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.

Model Encoding

SPECIFICATION

BLOCK DIAGRAM

DRIVING METHODS OF LED MODULE

This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs.

Typical output current normalized by rated current (%)

DIMMING OPERATION

3 in 1 dimming function (for B/AB-Type)

• Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 1 ~ 10VDC, or 10V PWM signal or resistance.
• Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
• Dimming source current from power supply: 100μA (typ.)

Applying additive 1 ~ 10VDC

Note: In the case of turning the lighting fixture down to 0% brightness, please refer to the configuration as follow, or please contact MEAN WELL for other options.

Using a switch and relay can turn ON/OFF the lighting fixture.

OUTPUT LOAD vs TEMPERATURE

(Note.10)

STATIC CHARACTERISTICS

De-rating is needed under low input voltage.

TOTAL HARMONIC DISTORTION

(THD)

48V Model, Tcase at 70℃

POWER FACTOR(PF) CHARACTERISTIC

Tcase at 70℃

EFFICIENCY vs LOAD

HLG-80H series possess superior working efficiency that up to 91% can be reached in field applications.

48V Model, Tcase at 70℃

LIFE TIME

MECHANICAL SPECIFICATION

Blank/D-Type

WATERPROOF CONNECTION

Waterproof connector can be assembled on the output cable of HLG-80H to operate in dry/wet/damp or outdoor environment.

CJ04 cable joiner can be purchased independently for user’s own assembly. MEAN WELL order No. : CJ04-1, CJ04-2.

Frequently Asked Questions

• Q: What is the input voltage range for the HLG-80H series?
  
  • A: The input voltage range is 90-305VAC or 127-431VDC.
• Q: Can the output voltage be adjusted?
  
  • A: The voltage adjustment range is adjustable for A-Type only via a built-in potentiometer.