Document

MaZDa-logo

MaZDa CX-5 FWD Upper Panel Removal

MaZDa CX-5 FWD Upper Panel Removal-fig1

Removal Installation

  1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0,SKYACTIV-G 2.5].)
  2. Open the console lid.
  3. Move the upper panel in the order of arrows (1), (2), and (3) shown in the figure, and detach clips A and B, and the hooks.

    MaZDa CX-5 FWD Upper Panel Removal-fig2

  4. Disconnect the commander switch connector. (With center display)
  5. Disconnect the electric parking brake (EPB) switch connector.
  6. Remove screws.

    MaZDa CX-5 FWD Upper Panel Removal-fig3

  7. Remove hooks from the upper panel.

    MaZDa CX-5 FWD Upper Panel Removal-fig4

  8. Remove the panel from the upper panel.
  9. Remove the commander switch when replacing the panel. (With center display) (See REMOVAL/INSTALLATION .)
  10. Remove the electric parking brake (EPB) switch when replacing the panel. (With center display) (See BRAKE SWITCH REMOVAL/INSTALLATION .)
  11. Install in the reverse order of removal.

Documents / Resources

MaZDa CX-5 FWD Upper Panel Removal [pdf] Installation Guide
CX-5 FWD Upper Panel Removal, CX-5 FWD, Upper Panel Removal, Panel Removal, Removal