MATCO TOOLS MDMAXCRPROA Maximus Code Reader PRO User Guide

MATCO - logo

Maximus
Code Reader PROA

MDMAXCRPROA

warning-Symbol.pngWARNING warning-Symbol.png

The study, understand and follow all instructions provided with this product. Read these instructions carefully before installing, operating, servicing or repairing this tool. Keep these instructions in a safe, accessible place.

Caution: To help prevent personal injury

  • Never use this tool for any application other than for which it was designed.
  • Never alter or modify this tool in any way. Improper operation and/or maintenance of the tool, or modification of the tool could result in serious injury or death.
  • Do not begin repairs without assurance that the vehicle is insecure position, and will not move during the repair.

INTENDED USE OF THE TOOL

This tool is designed as a code reader for professional technicians or DIYers.
Do not use this tool outside of the designed intent. Never modify the tool for any other purpose or use.

PRODUCT INFORMATION

Slim design with 4-inch color screen and Android platform.
Multilingual support and wireless update.
Only compatible with passenger cars with 12V voltage.

MATCO TOOLS MDMAXCRPROA Maximus Code Reader PRO - PRODUCT INFORMATION

Made in China to Matco specifications

FCC Statement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance w ith the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this  equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
MDMAXCRPROA (FCC ID: 2AUKMMAXCRPROA) has been evaluated to meet the general RF exposure requirements.

Components & Controls

MATCO TOOLS MDMAXCRPROA Maximus Code Reader PRO - Components & Controls

Powering Up

The tool can receive power via either of the following ways:

Method 1: Via Diagnostic Cable

MATCO TOOLS MDMAXCRPROA Maximus Code Reader PRO - Powering Up
Connect the diagnostic cable of the tool to the vehicle’s DLC (Data Link Connector) port.
*Note: The DLC is usually located 12 inches from the center of the instrument panel (dash), under or around the driver’s side for most vehicles. See diagram for possible DLC location.

Method 2: Via Data Cable
Connect one end of the included data cable to the charging port of the tool and the other end to the PC.

Getting Started

The first time you use this tool, you will need to make some system settings and keep the diagnostic software updated with the latest version.
Follow the steps below to proceed.

MATCO TOOLS MDMAXCRPROA Maximus Code Reader PRO - Getting Started

Now the tool is ready for use.
If you have any questions on the operation of the tool, please contact
Matco customer service number: 877-853-3738.
For more product information, please visit: www.matcotools.com

FCC Warning:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or  television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.   Device types Maximus Code Reader PROA with model MAXCRPROA (FCC ID: 2AUKMMAXCRPROA) have also been tested against this SAR  limit. The highest reported SAR value for body-worn is 0.92W/kg. This device was tested for typical body-worn operations with the back of the handset kept 0mm from the body. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided.

Documents / Resources

PDF thumbnailMDMAXCRPROA Maximus Code Reader PRO
User Guide · MDMAXCRPROA, Maximus Code Reader PRO

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. How do I register my scan tool(MAXCRPROA)? It will not allow me to use it unless it is registered.

    Michael asks How do I register my scan tool(MAXCRPROA)? It will not allow me to use it unless it is registered.
    Manuals+ clarified question
    Question

    How do I register and set up my Matco Maximus Code Reader PRO (MDMAXCRPROA)?

    Answer

    To register and activate your Matco Maximus Code Reader PRO (MDMAXCRPROA), you must complete the initial "Getting Started" setup process while connected to the internet. Follow these steps:

    1. Power on the tool: Connect the diagnostic cable to a vehicle's DLC port or use the data cable to connect to a PC.
    2. Start Setup: Tap "Start" on the Welcome screen.
    3. Configure Settings: Select your system language and time zone.
    4. WLAN Setup: Connect the tool to your local Wi-Fi network. This is required for registration and updates.
    5. Workshop Information: Configure your workshop details (this information will appear on your diagnostic reports).
    6. User Agreement: Read and sign the user agreement.
    7. Update/Register: Once the Job Menu appears, tap "Upgrade" to ensure your software is registered and updated to the latest version.

    If you encounter issues during this process, you can contact Matco customer service at 877-853-3738 or visit www.matcotools.com for further assistance.

  2. WILL THIS SCAN TOOL WORK ON MOTORCYCLES?

    🇺🇸 Anonymous asks WILL THIS SCAN TOOL WORK ON MOTORCYCLES?
    Manuals+ clarified question
    Question

    Will the Matco Tools MDMAXCRPROA Maximus Code Reader PRO work on motorcycles?

    Answer

    Based on the product information provided in the manual, the Matco Tools MDMAXCRPROA Maximus Code Reader PRO is not designed for use with motorcycles.

    The manual explicitly states under the "Product Information" section on page 1 that the tool is "Only compatible with passenger cars with 12V voltage."

    Using the tool for applications other than its designed intent is cautioned against to prevent personal injury or damage to the tool.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.