Genesis Low Lying Fog Generator
“
Product Information
Specifications
- Model: Genesis
- Manufacturer: Master FX
- Version: V1.1
- Designed for: Indoor use
- Fluid Compatibility: Approved Master FX Fog Fluids only
- Power Requirements: Refer to machine’s serial plate
- Safety: Follow all safety instructions provided
Product Usage Instructions
Packing List
Upon receiving your Genesis, open the package and carefully
remove contents to verify all components are accounted for. Notify
the manufacturer immediately if any parts are damaged or
missing.
Safety Information
Please read the safety information below carefully before
operating your Genesis:
- Avoid blocking vents on the top or sides of the Genesis.
- Ensure proper power requirements and grounding.
- Operate in a well-ventilated area with sufficient space around
the unit. - Use only approved Master FX Fog Fluids.
- Avoid contact with hot surfaces and output nozzles.
- Disconnect power when not in use.
Operating Instructions
- Verify operating voltage matches provided voltage.
- Connect to a grounded circuit.
- Ensure proper airflow around the unit.
- Use caution when handling fog fluids.
- Operate only in well-ventilated areas.
- Avoid obstructing vents and hot surfaces.
Maintenance
Regularly check for proper airflow and cleanliness of the unit.
Follow recommended fluid handling procedures. Keep the unit free
from obstructions and dust.
Frequently Asked Questions (FAQ)
Q: Can I use any fog fluid with the Genesis?
A: No, only approved Master FX Fog Fluids should be used to
avoid voiding the warranty.
Q: What should I do if I experience irritation from the
fog?
A: Rinse thoroughly if there is contact with hands or eyes. Seek
medical advice if irritation persists.
Q: Can the Genesis be used outdoors?
A: No, the Genesis is designed for indoor use only to prevent
risks of fire or shock.
“`
USER MANUAL
V1.1
WELCOME TO
Thank you for choosing Master FX. Designing and manufacturing special effects equipment isn’t just our job–it’s our passion. We spent years developing the Genesis, carefully refining every detail to create a ground-breaking low-lying fog solution unlike anything on the market, and we’re excited to see what you create.
PLEASE NOTE: This manual covers the Genesis only. For information on the Prodigy Pro or Prodigy+, please refer to their respective manuals.
INDEX
Safety Information………………………………………………………………………………………………….Page 2 Specifications…………………………………………………………………………………………………………Page 3 Dimensions & Overview…………………………………………………………………………………………..Page 4 Getting Started / Setup……………………………………………………………………………………………Page 4 Power…………………………………………………………………………………………………………………….Page 5 Setting Up Your Fog Machine……………………………………………………………………………………Page 6 Operation……………………………………………………………………………………………………………….Page 7 Menu & Settings……………………………………………………………………………………………………..Page 8 DMX Channels and Values………………………………………………………………………………………..Page 9 Condensation Pump Operation……………………………………………………………………………..Page 10 Shut Down Procedure……………………………………………………………………………………………Page 10 Errors and Troubleshooting……………………………………………………………………………………Page 10 Maintenance & Warranty………………………………………………………………………………………..Page 11
PACKING LIST
Upon receiving your Genesis, open the package and carefully remove contents to verify all components are accounted for, and have been shipped and handled with care. If any parts are damaged or missing please notify us immediately. The packing list includes, but is not limited to:
Genesis Prodigy Pro High Performance Fog Generator OR Prodigy+ Professional Fog Generator 2x PowerCon True1 Cables Allen Key 1 DMX Cable 10L Fog Fluid Container with Quick Connect Fittings 2.5L Condensation Reservoir with Quick Connect Fittings Warranty Registration Card 10ft (3M) Output Attachment Hose (optional) Wireless Remote for Prodigy Pro (optional) Prodigy Pro Road Case (optional) Genesis Slip Cover (optional)
SAFETY INFORMATION
Please read the following information very carefully before operating your Genesis. This article contains important details regarding set up, usage, and maintenance. Failure to abide by all warning labels and instructions may result in personal harm, machine malfunction, and a void in warranty.
Persons with asthma or allergic sensitivity may experience irritation, discomfort, or other allergic symptoms when exposed to artificially produced fog. Please allow sufficent air circulation around the machine at all times. Only use approved Master FX fluids.
Prior to connecting power to your Genesis and Prodigy Pro or Prodigy+, verify the machine’s operating voltage matches your provided voltage. Always connect to a grounded circuit to reduce the risk of electrocution. Power requirements can be found on your machine’s serial plate.
Do not block the vents on the top or sides of the Genesis. Do not place anything on top of the machine. Obstructing these vents will restrict airflow and hinder the machine’s performance. Keep all items off the unit during use.
Once your equipment is properly powered and operating, beware of hot surfaces on your Prodigy Pro or Prodigy+. Do not set items on top of the machines and avoid contact with output nozzle. Always disconnect power when not in use.
Operate only in a well ventilated area and never leave the equipment unattended. Fog may set off smoke detectors if not properly ventilated. Please allow at least 12 inches of space around the unit to avoid overheating. Do not continue to fog if visibility is reduced to 2 ft.
The Genesis, Prodigy Pro, and Prodigy+ are designed for indoor use only, to prevent risk of fire or shock, do not expose this product to rain, moisture, and flammables.
Only use approved Master FX Fog Fluids. Use of any other fluids will result in a voided warranty. Always use caution when pouring fluid and avoid any contact with hands and eyes. If contact occurs rinse thoroughly. If you experience irritation seek medical advice. Refer to the fluid’s SDS for proper handling.
High volumes of fog can cause residue buildup on the ground, creating potential slip hazards. Use caution when operating the Genesis in areas with limited visibility, and avoid walking through fog over surfaces where the ground is not clearly visible.
If your Genesis or fog generator is not working properly, promptly stop use and contact Master FX. Repair and service is to be done only by authorized technicians. Failure to comply will result in a voided warranty.
Proper air flow is essential for your machine’s performance. If you are incorporating your Genesis and Prodigy Pro into a permanent install, consult with a Master FX atmospheric specialist prior to installing. Improper venilation can cause damage to your equipment and result in a void of warranty. Only use approved road cases, use of custom made cases with improper venilation will also void your warranty.
Always keep the Genesis upright and level during use, transport, and storage. Do not operate the machine at a tilted angle, as this can lead to fluid or condensation spills, as well as machine malfunction.
2
HOW IT WORKS
The Genesis operates using patent-pending “FrostFlow” Cooling Technology to efficently cool the large volumes of fog produced by the Prodigy Series fog generators. The advanced cooling system is specifically engineered to bring the warmer fog to precise temperatures, delivering consistent low-lying fog effects with adjustable hang times, speeds, and densities — all without the need for CO. When the Genesis is connected to a Prodigy Series Fog Generator, the Genesis takes full control of the system, creating a seamless synergy of power, control, and precision for effortless professional low-lying fog effects.
KEY FEATURES Seamless Integration with Prodigy Pro & Prodigy+ Rugged Steel Housing Quick Disconnect Fluid Fittings Automated Condensation Pump System Voltage Detection 8 Min Initial Cool Down Time
POWER SPECIFICATIONS GENESIS 120V / 1560W / 16.1 Amps 208-240V / 1430W / 7.3 Amps PRODIGY PRO 120V / 2000W / 16.6 Amps 220V / 4000W / 17 Amps
INCLUDED ACCESSORIES 10L Fog Fluid Container 2.5L Condensation Reservoir Equipment Backplate DMX Cable 2x PowerCon True1s Allen Key
120V SYSTEM
CFM: 100,000CFM 1 Min of continuous output at 100%
PRODIGY PRO FLUID CONSUMPTION
GPH = gallons per hour / LPH = liters per hour
100% Output: 4.45 GPH / 16.8 LPH 50% Output: 3 GPH / 11.4 LPH
Infiniti Mode: 0.84 GPH / 3.2 LPH
CONTROL OPTIONS Onboard Intuitive Operating System Dust & Moisture Resistant Touch Screen Customizable Presets 5 Pin DMX (5ch) RDM Ready Integrated Timer
APPROVALS Certified to CSA STD C22.2# 104
OPTIONAL ACCESSORIES Road Case for Prodigy Pro Slip Cover for Genesis 10ft (3M) Output Hose
220V SYSTEM CFM: 150,000CFM 2 min of continuous output at 100%
PRODIGY PRO FLUID CONSUMPTION
GPH = gallons per hour / LPH = liters per hour
100% Output: 5.56 GPH / 21.04 LPH 50% Output: 3.75 GPH / 14.25 LPH
Infiniti Mode: 1.05 GPH / 4 LPH
3
DIMENSIONS & OVERVIEW
Genesis: 245lbs / 111kg Genesis with Prodigy Pro: 299lbs / 136kg
GETTING STARTED
CASTER INSTALLATION: Using the provided nuts and allen key, securely attach the two casters to the underside of the equipment backplate. BACK PLATE INSTALLATION: Align the back plate with the two mounting holes located on the angled section at the lower rear of the Genesis. Secure the back plate using the provided allen key and nuts, taking care not to overtighten.
4
GETTING STARTED
MOUNTING THE FOG MACHINE: Place the Prodigy Pro or Prodigy+ on the right side of the backplate. Align the edge of its output nozzle guard with the Genesis input, ensuring there is a 1 inch gap between the fog machine’s output and the Genesis input.
CONNECT CONDENSATION TANK: Remove the nut from the “Condensation Drain” port and attach the 10inch hose. Secure the hose to the machine, then connect the quick disconnect fitting to the 2.5L container.
CONNECT FLUID TANK: Use the remaining hose or hoses to connect your Prodigy Series Fog Generator to the 5L fluid container.
DMX CONNECTION: Using the provided DMX cable, connect your fog machine’s DMX out port to the Genesis “Prodigy” input port. When connected, the Genesis will automatically take control of the Prodigy Pro or Prodigy+ to operate as one system.
POWERING YOUR MACHINES
POWERING ON THE UNITS: Verify that each unit is connected to the correct power cable (see diagram below) and that the supplied voltage matches the machine requirements. Insert the PowerCon True1 connectors into the appropriate “Power In” ports on both the Genesis and the Prodigy Series Fog Machine. Switch the Genesis power switch to the On position. Once power is applied, the Genesis will automatically begin its cooldown sequence, while the Prodigy Series Fog Machine will begin heating up. The Genesis cooldown process may take up to 8 minutes. Once complete, it will remain in a ready state and does not require recycling. The Prodigy Pro or Prodigy+ may enter intermittent heating cycles based on runtime and operating conditions. The Genesis will display its cooldown status in the top left corner of the screen, while the Prodigy Pro or Prodigy+ will show its heat-up status on the home screen.
Prodigy Pro 120V Prodigy+ 120V Genesis 120v
Genesis 208-240V Prodigy Pro 220V
MASTER FX
Prodigy is heating up 90%
TIMER
Your Prodigy Pro and Prodigy+ will notify you as soon as they are ready to fog. A customizable greeting will display on the homepage of the Genesis and Prodigy Pro. For instructions on how to edit the greeting, see page 4.
MASTER FX
Prodigy is Ready To Fog
TIMER
5
SETTING UP YOUR FOG MACHINE
Before staring fog operation, ensure your Prodigy Pro or Prodigy+ is properly configured for use with the Genesis by setting the DMX address to “1” and adjusting the temperature settings as specified. Refer to the instructions below for each machine.
SET DMX CHANNEL: To set the DMX channel on your Prodigy Pro, go to the Settings menu and select “DMX Address.” Use the on-screen keypad to enter channel 1, then press “save” to confirm.
DMX MODE: In the bottom right, you can switch the Prodigy Pro between 2-channel and 3-channel DMX modes. In 3-channel mode, each output is controlled independently. In 2-channel mode, both outputs operate together.
Before fogging, make sure the provided 10L fluid tank is filled with the correct fluid and securely connected to the fluid input. Next, go to settings and press “Choose Fluid” to select the the fluid you are using.
This selection will automatically adjust the heater to ensure optimal vaporization temperature for your fog fluid, eliminating moisture at the output and maximizing its effectiveness.
Start by selecting “Low Lying Fog” followed by the fluid you are using. For more information on Master FX fog fluids, or if you need assisance in choosing the correct fluid, please contact us.
MASTER FX
DMX512 Address: 1
TIMER
DMX: Navigate the settings by pressing the menu button in the bottom left until you arrive at “DMX 512”. Using the arrow keys, select channel 1. When connected, your Prodigy+ screen will read “Connected to Genesis”.
FLUID SELECTION
Navigate the settings by pressing the menu button in the bottom left until you arrive
at “Choose Fluid”. Using the arrow keys, select the fluid you are using. This selection will automatically adjust the heater to ensure optimal vaporization temperature for your fog fluid, eliminating moisture at the output and maximizing its effectiveness.
6
FOG OPERATION / CONTROLLING THE GENESIS
Once your fog machine is properly set up and connected to the Genesis, the Genesis will assume full control allowing you to adjust both the fog volume and fan speed. Please note that any alerts related to the fog machine, such as low fluid warnings, will still appear on the fog machine’s display.
Below is an overview of the controls used to operate and navigate the Genesis. Use this as a reference for system functions and menu navigation.
MENU: Access Settings
BACK: Return to Previous Screen
POWER: Initiate Shut Down Sequence
FOG: Initiate Fog Operation
STOP: End Fog Operation
CANCEL: Abandon Current Operation
To operate the Genesis using the onboard interface, press “Fog” in the bottom right, this will bring up a screen with 2 customizable presets and a manual operation.
LOW & SLOW Using moderate fog output and a gentle, low-range fan speed, “Low and Slow” produces medium-density clouds that gently roll and swirl along the ground, drifting with a calm, steady motion. These settings can be adjusted to your preference and will be saved for future use. [Factory Settings: 20% Fog Output, 10% Fan Speed] STRATOSPHERE With high fog output and elevated fan speed, “Stratosphere” unleashes thick, voluminous clouds that surge forward, folding over themselves as they rapidly blanket large spaces. These settings can be adjusted to your preference and will be saved for future use. [Factory Settings: 60% Fog Output, 70% Fan Speed]
MANUAL MODE With adjustable fog and fan speed settings, you can fine-tune every detail to create your ideal low-lying fog effect.
7
FOG OPERATION / CONTROLLING THE GENESIS CONT.
To adjust the fog volume, press the “Fog” button to open the keypad and enter a specific value, then press Save to confirm. You can also use the arrow buttons to make incremental adjustments. The output volume, shown as a percentage, will appear beneath the “Fog” button.
To adjust the fan speed, press the “Fan” button to open the keypad and enter a specific value, then press Save to confirm. You can also use the arrow buttons to make incremental adjustments. The fan speed, shown as a percentage, will appear beneath the “Fan” button.
You can start or stop fog output at any time by pressing the “Fog” or “Stop” button.
GENESIS MENU AND SETTINGS
To adjust settings, go to the homepage and tap the menu button in the bottom right corner. From there, you can modify the DMX address, homepage greeting, timer, screen brightness, and screen dim time.
assign dmx channel edit homepage greeting
access support info
adjust timer settings access settings link to pro tip info
DMX ADDRESS Enter your DMX address using the keypad, then press Save. For more information on DMX values and operation, please see page 9.
HOMEPAGE GREETING Use the keypad to customize the greeting that appears on the home screen. When finished, press “Save” to confirm.
8
GENESIS MENU AND SETTINGS CONT.
SUPPORT For technical assistance, press “Support” to view contact information. This section also displays your current software version. To check for the latest version, please contact Master FX.
TIMER SETTINGS Use the arrows or press the corresponding button to adjust the fog volume, fan speed, run time, and wait time. Pressing the arrow keys will adjust the setting by a single interval. Pressing a button will open the keypad, where you can enter your desired value.
SETTINGS Screen Brightness: Adjust the display brightness to low, medium, or high. Screen Dim Delay: Set how long the screen remains active–choose from 15 seconds, 30 seconds, or indefinitely. Save Last Setting: Automatically resumes the operational state from the previous shut down sequence.
PRO TIPS: To learn more about creating stunning low-lying effects, scan the QR code to visit masterfx.com and explore the “Learn” page
DMX OPERATION
When the Genesis is connected to the Prodigy Pro or Prodigy+, the system operates as a single unit using 5 DMX channels. You do not need to run DMX In or Out to the Prodigy Pro or Prodigy+ as long as the fog machine is connected to the Genesis using the “Prodigy” input.
Below are the channel assignments and values for the Genesis DMX profile.
Ground Data 1(-) Data 1(+)
Data 2(+) Data 2(-)
GENESIS WITH PRODIGY PRO [2 CH. MODE]
CH. OPERATION VALUE
1
FOG OUTPUT BOTH
7-255
2 PRODIGY PRO POWER ON 7-127
2 PRODIGY PRO POWER OFF 128-255
3
NULL
NULL
4
FAN SPEED
7-255
5
GENESIS POWER ON
7-127
5 GENESIS POWER OFF 128-255
GENESIS WITH PRODIGY PRO [3 CH. MODE]
CH. OPERATION VALUE
1
FOG OUTPUT LEFT
7-255
2
FOG OUTPUT RIGHT
7-255
3 PRODIGY PRO POWER ON 7-127
3 PRODIGY PRO POWER OFF 128-255
4
FAN SPEED
7-255
5 GENESIS POWER ON 7-127
5 GENESIS POWER OFF 128-255
GENESIS WITH PRODIGY+ (v2)
CH. OPERATION VALUE
1
FOG OUTPUT
7-255
2 PRODIGY+ POWER ON 7-127
2 PRODIGY+ POWER OFF 128-255
3
NULL
NULL
4
FAN SPEED
7-255
5
GENESIS POWER ON
7-127
5 GENESIS POWER OFF 128-255
9
CONDENSATION PUMP OPERATION
When cooling down warm fog, condensation naturally forms within the Genesis system. To manage this, the Genesis is equipped with an automatic condensation pump that drains the collected moisture into an external 2.5L container.
Important: To prevent overflow or pump malfunction, it is essential to regularly empty the external container. Periodically check the water level during extended use, especially in high-output applications.
Proper maintenance of the condensation container will ensure consistent performance and prolong the life of your equipment.
SHUT DOWN PROCEDURE
When you’ve finished operating, ensure all machines are properly powered down.
Genesis: Press the power button located at the bottom center of the screen. Confirm the shutdown when prompted, turn the power swtich to the Off position.
Prodigy Pro: Press the power button at the bottom center of the screen and confirm the shutdown.
Prodigy+: Disconnect the PowerCon True1 connector to power down the unit.
Note: All machines can also be powered on and off via DMX. For DMX channel assignments and values, refer to page 9.
ERRORS / TROUBLESHOOTING
Below is a list of potential errors you may encounter. Please note that any errors related to the Prodigy Pro or Prodigy+ will appear on their respective screens. For more information, refer to the user manual specific to that machine.
INCORRECT POWER: Verify your supplied power matches your machines voltage.
WATER PUMP ERROR: The condensation pump has malfunctioned. Please contact us to arrange for repairs. In the meantime, you can manually drain the condensation using the drain plug located on the bottom rear of the machine, near the input side.
FAN ERROR The internal fan in the Genesis has malfunctioned. Please contact us to schedule a repair. The machine will still operate, but you will not have control over fan speed or fog output rate.
10
MAINTENANCE
DO NOT USE ANY CLEANING SOLUTIONS! When utilizing Master FX Fog Fluids, there’s no need for cleaning cycles. Using any cleaning solution may harm internal components and nullify your warranty.
PRIOR TO LONG TERM STORAGE, run your Prodigy Pro or Prodigy+ through a cycle to eliminate any potential fluid from the heater and leave any remaining fluid in the lines. Ensure the Genesis is fully drained of any remaining condensation. Store machines in a cool dry place.
AVOID OPERATING THE SYSTEM WITHOUT FLUID as this will cause damage to the internal pumps of the Prodigy Pro and Prodigy+ and void your warranty.
ENSURE FLUID CAP IS TIGHT to prevent dust or other particles from entering the fluid reservoir and causing damage to the internal components.
WARRANTY INFORMATION
Master FX reserves the right to alter the following terms and conditions if contingencies develop which were not apparent at the time of sale.
The warranty is valid for the original purchaser only and covers all internal components and required labor for a period of 5 years from the date of purchase. Master FX and its authorized service partners will continue to perform repairs and routine maintenance after the 5-year warranty period at the owner’s expense. The timeline for any repair is at the discretion of Master FX or its authorized service partners.
All repairs must have a Return Authorization (RA) number clearly noted on the box prior to being returned for service. Packages received without an RA will not be accepted. To schedule a repair and receive an RA number, please contact us at info@masterfx.com or call 877.578.6577. The customer is responsible for all shipping costs associated with service or repair.
Minor deviations from standard production quality do not qualify for repair or replacement under warranty. This warranty does not cover damage or defects caused by misuse or negligence, such as improper ventilation, dropping the machine, or exposure to moisture. The use of any fluid other than Master FX Fog Fluids will void the warranty. Additionally, tampering with internal components or making unauthorized modifications will void the warranty. All service must be performed by Master FX authorized technicians.
Master FX is not liable for repair delays caused by fire, strikes, or other events beyond our control. Note: Warranty information for the Prodigy Pro and Prodigy+ can be found in their respective user manuals. Please visit MasterFX.com/Warranty to register your Genesis.
CONTACTING SERVICE DEPARTMENT
Do not attempt to service your Genesis without authorization from a certified Master FX technician, as this will void your warranty. If your machine requires service, please contact us and we will set up a Return Merchandise Authorization (RMA) for you.
877-578-6577 help@masterfx.com
11
Documents / Resources
 | Master FX Genesis Low Lying Fog Generator [pdf] User Manual Genesis, Prodigy Pro, Prodigy, Genesis Low Lying Fog Generator, Genesis, Low Lying Fog Generator, Lying Fog Generator, Fog Generator, Generator |