MASTECH MS2203 Three-Phase Power Clamp Meter

Safety instruction

Special attention should be paid when using the test and measurement instrument because the improper usage may cause electric shock and damage the equipment.

• Use proper measurement category (CAT), voltage, and amperage-rated probes, test leads, and adapters for the measurement.
• Do not use or store the device around explosive gas, vapor, or under high temperature and humidity.
• When handling the test probes and crocodile clips, keep your fingers behind the physical guard.
• Examine the measuring test leads (if present) before use. Any element of which the insulation deteriorates (even partially), replace them with proper functional test leads.
• Connect the common test lead before the live test lead and remove the live test lead before the common test lead.
• Before measuring the current, make sure the instrument fuses available and disconnect the power supply to the circuit test
• Remove the batteries if the device is not used for an extended period of time, or if stored in temperatures above 45 °C. If the batteries are not removed, battery leakage can damage the device.

Contents

Specifications

CHARGING

SINGLE-PHASE -3PHASE 4 WIRE-3PHASE 3WIRE

Documents / Resources

MASTECH MS2203 Three Phase Power Clamp Meter [pdf] User Guide MS2203 Three Phase Power Clamp Meter, MS2203, Three Phase Power Clamp Meter

References

• User Manual