MASTECH MS2128 Digital Clamp Meter User Guide

MASTECH MS2128 Digital Clamp Meter User Guide

MASTECH MS2128 Digital Clamp Meter User Guide - Insert Battery

MASTECH MS2128 Digital Clamp Meter User Guide - DC AC

MASTECH MS2128 Digital Clamp Meter User Guide - Current

MASTECH MS2128 Digital Clamp Meter User Guide - Voltage

MASTECH MS2128 Digital Clamp Meter User Guide - Com Input

MASTECH MS2128 Digital Clamp Meter User Guide - Warning or Caution icon

The special attention should be paid when using the test and measurement instrument because the improper usage may cause electric shock and damage the equipment.
– Use proper measurement category (CAT), voltage, and amperage rated probes, test leads, and adapters for the measurement.
– Do not use or store the device around explosive gas, vapor, or under high temperature and humidity.
– When handling the test probes and crocodile clips, keep your fingers behind the physical guard.
– Examine the measuring test leads (if present) before use. Any element of which the insulation is deteriorated (even partially), replace them with proper functional test leads.
– Connect the common test lead before the live test lead and remove the live test lead before the common test lead.
– Before measuring current, make sure the instrument fuses available and disconnect the power supply to the circuit test
– Remove the batteries if the device is not used for an extended period of time, or if stored in temperatures above 45 °C. If the batteries are not removed, battery leakage can damage the device.

Contents

MASTECH MS2128 Digital Clamp Meter User Guide - Contents

Specifications

MASTECH MS2128 Digital Clamp Meter User Guide - Specifications

MASTECH MS2128 Digital Clamp Meter User Guide - MGL Logo

EMEA
MGL EUMAN S.L.
C/ Picu Castiellu, Parcelas i1-i4 33163,
Argame Morcín, Asturias, Spain
Tel: +34 985-08-18-70
Email: cs.emea@mgl-intl.com

USA MGL AMERICA, INC.
2810 Coliseum Centre Drive,
Ste. 100 Charlotte,
North Carolina 28217 USA
Tel: +1 833-533-5899
Email: cs.na@mgl-intl.com

UNITED KINGDOM
MGL GROUP U.K. LIMITED
14 Weller St, London, SE1 1QU, UK
Tel: +34 985-08-18-70
Email: cs.uk@mgl-intl.com

MEXICO & LATAM
MGL LATAM S.A DE CV
Colonia Industrial Vallejo Del.
Azcapotzalco 02300, Mexico D.F
Tel: +1 833-533-5899
Email: cs.latam@mgl-intl.com
SKU Number: MS2128CBGLO

APAC

MGL APPA Corporation
Flat 4-1, 4/F, No. 35, Section 3Minquan East Road.
Taipei, Taiwan.
Tel: +886 2-2508-0877
Email: cs.apac@mgl-intl.com

SKU Number: MS2128CBGLO 

MASTECH MS2128 Digital Clamp Meter User Guide - QR Code
http://www.mastech-group.com/support.php?n=0

Documents / Resources

MASTECH MS2128 Digital Clamp Meter [pdf] User Guide
MS2128, MS2128 Digital Clamp Meter, Digital Clamp Meter, Clamp Meter, Meter

References

Leave a comment

Your email address will not be published. Required fields are marked *