Martin Jerry Smart Switch Wi-Fi Connection

graphical user interface

READ HERE FIRST !!!

  1. The switch must work well manually after installation. If not, go back to the wiring step as below. Single Pole S01 (click here) | 3-way ST01 (click here).
  2. WiFi router should be 2.4G WiFi. CANNOT support 5G (802.11av).
    a. If you are using the dual band wifi router, please set a separate SSID for the 2.4G.
    b. If you are using google wifi, which you cannot set a name for 2.4G, please stay far enough from the wifi router until your phone indicates 2.4G wifi connected.

Video Demo of this Manual: (To be updated)

Download Smart Life App

Confirm that you have downloaded the right Smart Life App (Same Logo as the right side). If not, download it from the links
iPhone: https://itunes.apple.com/us/app/smart-life-smart-living/id1115101477?mt=8
Android: https://play.google.com/store/apps/details?id=com.tuya.smartlife&hl=en_US
qr code

Set the Switch to Pairing Mode
  1. After wiring, you will see a red/purple indicator on the switch. If not, press the tiny restart button.
  2. Press and hold the power button for 5-8s until the red/purple indicator changes into blue and blinks quickly.
    diagram
Pair the switch on App

graphical user interface, application

graphical user interface, text, application, chat or text message

graphical user interface, application
If the above pairing method fails several times,

Please go to the AP mode mentioned down below.

Step 1: Set the switch to AP mode

  1. Press and hold the power button for 5-8s until the indicator blinks quickly.
  2. Press and hold the power button for 5-8s until the indicator blinks slowly.

Step 2: Pair the switch on SmartLife App (AP mode)
graphical user interface

graphical user interface, application

Then, Connect the Hotspot from the Switch — > Back to App for pairing.

graphical user interface, application

Tech support
https://www.martinjerry.com/support

Documents / Resources

Martin Jerry Smart Switch WiFi Connection [pdf] User Guide
US-SS01, S01, ST01, Smart Life

References

Join the Conversation

1 Comment

  1. I have added Martin Jerry dimmers and fan switches to the entire lower level of my home. I have both 3-way and single pole dimmers, but they are very inconsistent in the level of dimming and the display panel itself. I have two questions:

    1) Why do some switches display the level of dimming when off, while others do not? The single pole dimmers all seem to be inconsistent in which do and which don’t.

    2) Why am I only able to set the lowest level of dimming on some of the switches via the Smart Life app and other I cannot?

Leave a comment

Your email address will not be published. Required fields are marked *