PIR48 Dual PIR Motion Sensor
“
Specifications
- Product Name: PIR48 Dual PIR Motion
Sensor - Installation: Indoor & Outdoor
- Voltage: 220 – 240V AC
- Detection Motion Speed: 0.6 – 1.5m/s
- Power Frequency: 50/60 Hz
- Ambient Light: Adjustable Lux level
- IP Rating: IP65
Product Usage Instructions
Installation
The PIR48 Dual PIR Motion Sensor is suitable for both indoor and
outdoor installations. However, installation must be carried out by
a qualified electrician to ensure safety and proper
functionality.
Adjusting Settings
The PIR48 sensor comes with adjustable settings for motion
sensitivity and Lux level. These settings can be customized to suit
your specific needs and environment. Refer to the user manual for
detailed instructions on adjusting these settings.
Integration
The PIR48 sensor is designed to easily integrate into new or
existing installations. Its versatile design allows for seamless
integration into various setups, providing reliable motion
detection indoors and outdoors.
IP Rating
With an IP65 rating, the PIR48 sensor is suitable for use in
both indoor and outdoor environments. The IP65 rating ensures
protection against dust and water, making it a durable choice for
various applications.
FAQ
Q: Can the Lux level be adjusted manually?
A: Yes, the Lux level on the PIR48 sensor is adjustable to meet
your specific lighting requirements. Refer to the user manual for
instructions on adjusting the Lux level.
Q: What is the recommended installation height for the PIR48
sensor?
A: The recommended installation height for optimal performance
of the PIR48 sensor is between 2 to 3 meters above the ground
level. This height range ensures effective motion detection
coverage.
“`
INSTRUCTION MANUAL
PIR48
Dual PIR Motion Sensor
180° Front Sensor 360° Bottom Sensor
Indoor & Outdoor Installation
1. INTRODUCTION The PIR48 automa cally turns on lights or any electrical device within the sensors rated load, when mo on and body heat is detected. It has dual PIR Sensors for a 180° detec on area in front of the sensor and a 360° detec on area directly beneath the sensor. Both sensors
and the adjustable se ngs for me and Lux level, allow the PIR48 to easily integrate into new or exis ng installa ons. With an IP65
ra ng, the sensor is intended for indoor or outdoor installa ons. Installa on must be done by a qualified electrician. 2. SPECIFICATIONS
Function
Range
Function
Range
Voltage
220 – 240V AC
Detection Motion Speed 0.6 – 1.5m/s
Power Frequency
50/60 Hz
Working Temperature -20~40°C.
Ambient Light
<3 – 2000 Lux (Adjustable)
Working Humidity
<93% RH
Time Delay
10 sec (±3 sec) to 15 min (±2 min)
Power Consumption
Approx. 0.5W
Rated Load
1200W Incandescent/ 600W LED/CFL
Installation Height
1.8 – 2.5m
Front Detection Area
180°
IP Protection
IP65 Indoor & Outdoor
Bottom Detection Area
360°
Swivel Head
45° (L to R), 180° (Up/Down)
Front Detection Distance 12m Max
Warranty
5 years
Bottom Detection Distance 6m Max
Standards
IEC 60669-1, IEC 60669-2-1
Mounting
Wall and Ceiling Mountable
AS/NZS 60669.1, AS/NZS 60669.2.1
3. FUNCTION a. Sensor Can identify between day and night (Lux Mode):
The consumer can adjust working state in different ambient light. It can work in the day time and at night when it is adjusted on the ” ” (sun) position (max). It can work in the ambient light less than 3 LUX when it is adjusted on the “3” position (min). As for the adjustment pattern, please refer to the testing pattern. b. Time-Delay is added continually: When the sensor detects movement while the light is already on, the countdown timer resets. This means the light will remain On for the full set duration from the moment of the latest detection. c. Adjustable Time Delay: The sensor can be set according to the consumer’s desire (10s, 30s, 90s, 3min, 7min, 15min)
4. CONTROL SETTING INFORMATION ! Turn the TIME knob anticlockwise to the minimum (10s). Tun the LUX knob clockwise to the maximum (Sun). ! Switch on the power; the sensor will require 30 seconds to warm up. Once the sensor detects movement, the lamp will turn On. If
no other movement is detected within the time duration set, the light will turn ! Off within the 10 seconds ±3 sec.
Turn the LUX knob anticlockwise to the minimum (3). If the ambient light is more than 3 Lux, the sensor is not able to function. If the ambient light is less than 3 Lux (dark), the sensor will operate.
Note: When testing in daylight, please turn Lux knob to (Sun) position, otherwise the sensor will not work!
5. WIRING INFORMATION
WARNING: Danger of Death Through Electrical Shock Y Must be installed by professional
electrician. Y Disconnect power source. Y Cover or shied any adjacent live
components.
6. INSTALLATION
! Unscrew and remove fixing bracket from base of the sensor. ! Insert the power cable into the slot provided. ! Connect the power cable into the terminal block as per the wiring
diagram. ! Identify the ideal field of view and use fixing bracket mounting
holes to ensure correct alignment for motion sensor. ! Drill holes and screw the fixing bracket to the marked location. ! Reconnect the sensor to the fixing bracket and fasten the screws. ! Once installation is complete, swivel the head to point in the
intended direction, secure it, and turn on the power to test.
7. INSTALLATION ADVICE ! Avoid pointing the detector towards objects with highly
reflective surfaces, such as mirrors etc. ! Avoid mounting the detector near heat sources, such as
heating vents, air conditioning units, light etc. ! Avoid pointing the detector towards objects that may move
in the wind, such as curtains, tall plants etc.
8. SENSOR INFORMATION
Bottom Sensor
Bottom Sensor
Front Sensor
Note: The PIR sensor operates by detecting motion when the detector beams are interrupted, typically by the movement of an object or a walking person. If a person walks directly in front of or towards the beam, the sensor may not detect movement. However, when two beams are crossed, the PIR sensor detects movement, as it picks up the change in the infrared radiation pattern caused by the interruption of both beams. This method increases detection accuracy and reduces the chances of false or non-detection.
9. TROUBLESHOOTING
MAJOR TECH (PTY) LTD
South Africa
Australia
www.major-tech.com
www.majortech.com.au
sales@major-tech.com
info@majortech.com.au
Documents / Resources
 | MAJOR TECH PIR48 Dual PIR Motion Sensor [pdf] Instruction Manual PIR48 Dual PIR Motion Sensor, PIR48, Dual PIR Motion Sensor, PIR Motion Sensor, Motion Sensor, Sensor |