PIR44B 180° PIR Motion Sensor
Product Specifications
- Function: Indoor & Outdoor
Installation - Voltage: 220 – 240V AC
- Power: Not specified
- Frequency: 50/60 Hz
- Ambient Light: Not specified
- Time Delay: Not specified
- Rated Load: Not specified
- Detection Area: Not specified
- Detection Distance: Not specified
- Detection Motion Speed: Not specified
- Mounting: Not specified
Product Usage Instructions
Installation
1. Ensure the power supply is within the specified voltage range
(220 – 240V AC).
2. Choose a suitable indoor or outdoor location for
installation.
3. Mount the PIR44B device securely using appropriate mounting
hardware.
Operation
1. Once installed, the PIR44B will detect motion within its
specified detection area.
2. The device will activate when motion is detected, triggering
the connected load.
3. Adjust any settings or configurations as needed based on the
ambient light conditions or time delay.
Maintenance
1. Regularly check for any obstructions that may affect the
motion detection capabilities.
2. Clean the device periodically to ensure optimal
performance.
Frequently Asked Questions (FAQ)
Q: What is the maximum detection distance of the PIR44B?
A: The maximum detection distance is not specified in the
product specifications.
Q: Can the PIR44B be used in areas with varying ambient light
conditions?
A: Yes, the PIR44B can be adjusted to accommodate different
ambient light levels.
Q: Is the PIR44B suitable for use in both residential and
commercial settings?
A: Yes, the PIR44B is designed for use in both indoor and
outdoor environments, making it suitable for various settings.
INSTRUCTION MANUAL
PIR44B
180° PIR Motion Sensor
Indoor & Outdoor Installation
1. INTRODUCTION The PIR44B automa cally turns on lights or any electrical device within the sensors rated load, when mo on and body heat is detected. It has a 180° detec on range and adjustable se ngs, easily integra ng into new or exis ng installa ons. With an IP65 ra ng, it can be installed indoors or outdoors. Installa on must be done by a qualified electrician.
2. SPECIFICATIONS
Function Voltage Power Frequency Ambient Light Time Delay Rated Load Detection Area Detection Distance Detection Motion Speed Mounting
Range 220 – 240V AC 50/60 Hz <3 – 2000 Lux (Adjustable) 10 sec (±3 sec) to 15 min (±2 min) 1200W Incandescent/ 600W LED/CFL 180° 12m Max 0.6 – 1.5m/s Wall and Ceiling Mountable
Function Working Temperature Working Humidity Power Consumption Installation Height IP Protection Swivel Head Warranty Standards
Range -20~40°C <93% RH Approx. 0.5W 1.8 – 2.5m IP65 Indoor & Outdoor 45° (L to R), 180° (Up/Down) 5 years IEC 60669-1, IEC 60669-2-1 AS/NZS 60669.1, AS/NZS 60669.2.1
3. FUNCTION a. Sensor Can identify between day and night (Lux Mode):
The consumer can adjust working state in different ambient light. It can work in the day time and at night when it is adjusted on the ” ” (sun) position (max). It can work in the ambient light less than 3 LUX when it is adjusted on the “3” position (min). As for the adjustment pattern, please refer to the testing pattern. b. Time-Delay is added continually: When the sensor detects movement while the light is already on, the countdown timer resets. This means the light will remain On for the full set duration from the moment of the latest detection. c. Adjustable Time Delay: The sensor can be set according to the consumer’s desire (10s, 30s, 90s, 3min, 7min, 15min)
4. CONTROL SETTING INFORMATION ! Turn the TIME knob anticlockwise to the minimum (10s). Turn the LUX knob clockwise to the maximum (Sun). ! Switch on the power; the sensor will require 30 seconds to warm up. Once the sensor detects movement, the lamp will turn On. If
no other movement is detected within the time duration set, the light will turn Off within the 10 seconds ±3 sec. ! Turn the LUX knob anticlockwise to the minimum (3). If the ambient light is more than 3 Lux, the sensor is not able to function. If the
ambient light is less than 3 Lux (dark), the sensor will operate.
Note: When testing in daylight, please turn Lux knob to (Sun) position, otherwise the sensor will not work!
5. WIRING INFORMATION
WARNING: Danger of Death Through Electrical Shock Y Must be installed by professional
electrician. Y Disconnect power source. Y Cover or shied any adjacent live
components.
6. INSTALLATION
! Unscrew and remove fixing bracket from base of the sensor. ! Insert the power cable into the slot provided. ! Connect the power cable into the terminal block as per the wiring
diagram. ! Identify the ideal field of view and use fixing bracket mounting
holes to ensure correct alignment for motion sensor. ! Drill holes and screw the fixing bracket to the marked location. ! Reconnect the sensor to the fixing bracket and fasten the screws. ! Once installation is complete, swivel the head to point in the
intended direction, secure it, and turn on the power to test.
7. INSTALLATION ADVICE ! Avoid pointing the detector towards objects with
highly reflective surfaces, such as mirrors etc. ! Avoid mounting the detector near heat sources, such
as heating vents, air conditioning units, light etc. ! Avoid pointing the detector towards objects that may
move in the wind, such as curtains, tall plants etc.
8. SENSOR INFORMATION
Note: The PIR sensor operates by detecting motion when the detector beams are interrupted, typically by the movement of an object or a walking person. If a person walks directly in front of or towards the beam, the sensor may not detect movement. However, when two beams are crossed, the PIR sensor detects movement, as it picks up the change in the infrared radiation pattern caused by the interruption of both beams. This method increases detection accuracy and reduces the chances of false or non-detection.
8. TROUBLESHOOTING
MAJOR TECH (PTY) LTD
South Africa
Australia
www.major-tech.com
www.majortech.com.au
sales@major-tech.com
info@majortech.com.au
Documents / Resources
 | Major Tech PIR44B 180° PIR Motion Sensor [pdf] Instruction Manual PIR44B, PIR44B 180 PIR Motion Sensor, PIR44B, 180 PIR Motion Sensor, Motion Sensor, Sensor |