Mahr P2010 MB Series Inductive Probe
FEATURES
- Models with or without compressed air (pneumatic) lifter or vacuum retraction
- Measuring pin mounted in ball-bearing guide
- High linearity over the entire measuring range
- Excellent electromagnetic shielding (EMC)
- All probes can be easily converted from axial to radial by mounting a slip-on cap (included)
- Chemical resistance data: resis-tant to oil, gasoline, water and aliphatics. Moderately resistant to acids, bases, solvents and ozone
- Package contains: instruction manual, cap for radial cable output, spanner for preliminary stroke setting
TECHNICAL DATA
| Order no. 5324030 5324031 5324033 5324034 | |||||
| Product type | P2010 MB | P2010 TB | P2010 UB | P2010 FB | |
| Measuring range | mm | ± 5 | |||
| Measuring range | inch | ± .197“ | |||
| Distance to upper stop | mm…mm | +5.3 | |||
| Distance to upper stop | inch…inch | + .20“ | |||
| Distance to lower stop | mm…mm | –5.3 | |||
| Distance to lower stop | inch…inch | –.20“ | |||
| Lifter / retraction | Compressed air retraction (max. 1 bar) | ||||
| Measuring force | N | Depending upon air pressure | |||
| Sensitivity deviation | % | 0.3 | |||
| Repeatability fw | µm | 0.2 | |||
| Repeatability fw | inch | 8 µ“ | |||
| Hysteresis fu | µm | 1 | |||
| Hysteresis fu | inch | 40 µ“ | |||
| Linearity deviation within +/–2.0 mm | µm | 4 | |||
| Linearity deviation within +/–.079“ | inch | 160 µ“ | |||
| Linearity deviation within +/–5.0 mm | µm | 20 | |||
| Linearity deviation within +/–.197“ | inch | 200 µ“ | |||
| IP protection category | IP 64 | ||||
| Cable length | m | 2.5 | |||
| Temperature coefficient | µm/°C | 0.15 | |||
| Compatibility | Mahr VLDT | Tesa | Marposs | Federal | |
Dimension
| Order no. g Dimension f j k l m a b c d e f h i | ||||||||||||||
| inch | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | mm | ||
| 5324030 | M 2.5 | 3.6 | 9 | 8.3 | 12.5 | 125.7 | 28 | 34 | 6 | 9.2 | 8 | 14 | 26.5 | |
| 5324031 | M 2.5 | 3.6 | 9 | 8.3 | 12.5 | 125.7 | 28 | 34 | 6 | 9.2 | 8 | 14 | 26.5 | |
| 5324033 | M 2.5 | 3.6 | 9 | 8.3 | 12.5 | 125.7 | 28 | 34 | 6 | 9.2 | 8 | 14 | 26.5 | |
| 5324034 | 4/48 UNF | 0.375 | 3.6 | 9 | 8.3 | 12.5 | 125.7 | 28 | 34 | 6 | 9.2 | 14 | 26.5 | |
FAQ
- Q: What is the maximum air pressure for retraction?
A: The maximum air pressure for retraction is 1 bar. - Q: What IP rating does the probe have?
A: The probe has an IP rating of IP 64, indicating protection against dust and water splashes. - Q: How do I ensure accurate measurements with the probe?
A: To ensure accurate measurements, make sure the probe is securely connected, maintain stable contact during measurement, and perform regular maintenance checks.
Documents / Resources
 | Mahr P2010 MB Series Inductive Probe [pdf] Owner's Manual P2010 MB, P2010 TB, P2010 UB, P2010 FB, P2104 MA, P2104 TA, P2104 UA, P2104 FA, P2104 MB, P2104 TB, P2104 UB, P2104 FB, P2010 MB Series Inductive Probe, P2010 MB Series, Inductive Probe |
